| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: restore active device pointers after failed sprout
btrfs_init_new_device() switches latest_dev and possibly s_bdev from the
seed device to the new sprout device before creating the first writable
chunks.
If chunk creation or the subsequent sprout setup fails, the error path
releases the new device without switching those pointers back.
btrfs_show_devname() can then dereference the freed latest_dev and crash.
Restore the active device pointers to the latest seed device before
removing and releasing the failed sprout device. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep refcount_acquire nullable for borrowed RCU kptrs
bpf_refcount_acquire() is fallible for a borrowed reference because the
object may have reached a zero refcount. The verifier therefore keeps
KF_RET_NULL on the return value unless the argument is an owning reference.
An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only
receives NON_OWN_REF when the pointee contains a graph node. A refcounted
object without a graph node consequently looks like an owning reference
even though the loaded register has no acquired reference state. If the
program drops the last real reference while remaining in the RCU critical
section, refcount_inc_not_zero() returns NULL while the verifier treats the
result as non-NULL.
Only classify the argument as owning when it is backed by a verifier-tracked
reference. This retains the non-NULL return for pointers from bpf_obj_new(),
bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a
NULL check for borrowed RCU kptrs.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: clamp quantum in parse and fallback paths
ets_qdisc_change() falls back to psched_mtu() with no floor for bands
without an explicit quantum. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the
deficit-refill loop spin under the qdisc lock.
Move the floor into ets_quantum_parse() so explicitly configured quanta
are also clamped to [256, 1<<20], not just the fallback path.
Conditions to recreate the bug:
CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: cope with concurrent instance destruction
Instances are refcounted. However, only memory release happens on the
1 -> 0 transition; the unlink from hashes can occur with any refcount.
Uncooperative userspace can force a situation where a queue is pending
for destruction from netlink event while a different socket with same
portid processes an UNBIND request.
With right timing, this will unhash the instance again:
Oops: general protection fault, [..]
Call Trace:
<TASK>
nfulnl_recv_config+0x31a/0xd50
nfnetlink_rcv_msg+0x7c2/0xeb0 |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Update last skb marker in manage_oob().
Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU
due to OOB skb.
In the following cases, manage_oob() skips OOB skb(s) and returns
NULL for the last recv(MSG_PEEK):
socketpair(AF_UNIX, SOCK_STREAM, 0, sk);
1) skb -> OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
2) skb -> consumed OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
3) consumed OOB skb -> OOB skb -> NULL
send(sk[0], "a", 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_OOB);
send(sk[0], "b", 1, MSG_OOB);
recv(sk[1], buf, 1, MSG_PEEK);
Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer,
or non-OOB skb is not yet consumed), and unix_stream_data_wait() is
called.
However, it returns immediately because @last is not updated in
unix_stream_read_generic(), and the thread busy-waits for a new skb.
Let's update @last in manage_oob().
For MSG_PEEK, @last is updated with the skipped OOB, and for the
non-peek case, @last matches the returned value (when !copied)
because OOB is unlinked.
Note that manage_oob() is inlined and no stack canary is added. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: create the root dentry after loading cylinder metadata
ufs_fill_super() installed sb->s_root before it loaded the cylinder
group structures for a writable mount:
sb->s_root = d_make_root(inode);
...
if (!sb_rdonly(sb))
if (!ufs_read_cylinder_structures(sb))
goto failed;
When ufs_read_cylinder_structures() failed, the error path freed the
in-core superblock information and set sb->s_fs_info to NULL while
sb->s_root stayed installed. get_tree_bdev() then reached
deactivate_locked_super(), and because s_root was present,
generic_shutdown_super() called sync_filesystem() and the put_super
operation. Both dereference UFS_SB(sb), which is now NULL, so a mount
that fails only while reading the cylinder groups oopses during
teardown. A crafted image whose first cylinder group cannot be read
reaches this path.
Load the cylinder group metadata first and create the root dentry last,
so the superblock is published to the VFS only once it is fully set up.
ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the
super_block and do not use the root inode, so the reordering is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
tick/broadcast: Plug clockevents replacement race
朱恺乾 reported and decoded the following race condition when a broadcast
device is replaced:
CPUA CPUB
__tick_broadcast_oneshot_control()
bc = tick_broadcast_device.evtdev;
tick_install_broadcast_device(dev)
clockevents_exchange_device(cur, dev)
shutdown(cur);
detach(cur);
cur->handler = noop;
tick_broadcast_device.evtdev = dev;
tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device.
If the original broadcast device has a restricted interrupt affinity mask
and the last CPU in that mask goes offline then the BUG() in
tick_cleanup_dead_cpu() triggers because the clockevent device is not in
detached state.
The reason for this is that tick_install_broadcast_device() is not
serialized vs. tick broadcast operations.
The obvious cure is to serialize tick_install_broadcast_device() with
tick_broadcast_lock against a concurrent tick broadcast operation.
That requires to split clockevents_exchange_device() into two parts, one
which does the exchange, shutdown and detach operation and the other which
drops the module reference count. This is required because the module
reference cannot be dropped while holding tick_broadcast_lock.
Let clockevents_exchange_device() do both operations as before, but let the
broadcast device code take the two step approach and do the device
exchange under tick_broadcast_lock and drop the module reference count
after releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take the reference before publishing the named histogram trigger
event_hist_trigger_named_init() puts the trigger on the global
named_triggers list and only then takes the reference on the trigger it
shares its histogram with:
data->ref++;
save_named_trigger(data->named_data->name, data);
ret = event_hist_trigger_init(data->named_data);
if (ret < 0) {
kfree(data->cmd_ops);
data->cmd_ops = &trigger_hist_cmd;
}
return ret;
event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and
nothing takes the trigger back off the list on the way out.
event_hist_trigger_parse() frees it, and the next lookup by name reads the
freed object:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff888009346860 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 67:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Do the reference first and publish once it has succeeded, so that nothing
which can fail runs after the trigger becomes findable. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Limit firmware log name prints to field size
The name in struct vpu_tracing_buffer_header is a fixed-size array
populated by the NPU firmware. It is expected to be NUL-terminated,
but nothing on the host side enforces this, so printing it with an
unbounded string conversion would read past the field if the
terminator is ever missing and expose adjacent bytes of the shared
tracing BO through dmesg and the debugfs FW log output.
Print at most as many characters as the name field holds, so the output
never runs past it even if the string is not NUL-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
bootconfig: Fix integer overflow in initrd size check
Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd
with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer
arithmetic:
data = ((void *)hdr) - size;
to wrap around on 32-bit systems (or when pointer subtraction overflows).
Because data wraps around, the subsequent bounds check:
if ((unsigned long)data < initrd_start)
evaluates to false, bypassing the check. The kernel then calls
xbc_calc_checksum(data, size), which attempts to read 4GB of memory,
hitting unmapped pages and triggering a fatal kernel page fault during
early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an
unbounded 32-bit size can similarly bypass the initrd_start check.
Fix this by:
1. Ensuring the initrd is at least large enough to contain the bootconfig
footer and verifying hdr is within the initrd bounds.
2. Checking that size does not exceed XBC_DATA_MAX and does not exceed
the available space between initrd_start and hdr before performing
pointer subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm
In function ctr_aes_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. When the buffer is used
explicitly scrub it at the end of the code block to avoid exposure of
maybe sensitive data.
In a similar way the function gcm_aes_crypt() hat an error path where
the CPACF param block was not scrubbed. Instead of return early now
these error paths go to end of function where explicit scrubbing is
done. Similar with the buffers which are part of the gcm_sg_walk
structs from the variables gw_in and gw_out. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
