| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: initialise workingset state before folio split
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests. |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix mirred deadlock on device recursion
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix warning in poll cq direct mode
CQs allocated by ib_alloc_cq() always have a comp_handler. Though
in direct mode this handler is never expected to be called, it
is still called when the driver is reset, triggering the following
WARN_ONCE():
Call trace:
ib_cq_completion_direct+0x38/0x60
hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2]
hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2]
hclge_notify_roce_client+0x60/0xbc [hclge]
hclge_reset_rebuild+0x48/0x34c [hclge]
hclge_reset_subtask+0xcc/0xec [hclge]
hclge_reset_service_task+0x80/0x160 [hclge]
hclge_service_task+0x50/0x80 (hclge]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18 |
| SiYuan 3.8.0 contains a path traversal / sensitive file exposure vulnerability in the RenderTemplate function (kernel/model/template.go), reachable via the POST /api/template/render endpoint (kernel/api/template.go). The endpoint restricts the supplied path only to the workspace directory (util.IsAbsPathInWorkspace) but, unlike the file API's refuseToAccess() blocklist, applies no sensitive-path exclusion. This allows an authenticated attacker to read sensitive workspace files, including conf/conf.json, which contains the API token and cookie signing key. The issue is fixed in v3.8.1. |
| SiYuan before v3.8.1 fails to filter invisible-tier content from SQL embed blocks, attribute-view keys, and attribute-view backlinks in publish mode. Anonymous readers can enumerate invisible content through these three listing mechanisms despite admin configuration marking content unlisted. |
| Improper control of a resource through its lifetime in Workers in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. |
| Improper resource exposure in StreamsAPI in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially bypass web origin policy into a privileged page via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| In Zimbra Collaboration before 10.1.17, a local file inclusion (LFI) vulnerability exists in the Zimbra Classic Web Client due to improper validation of the fu request parameter. An unauthenticated attacker can exploit this vulnerability by supplying a crafted path, potentially allowing unauthorized disclosure of protected files, such as WEB-INF/web.xml, within the web application directory. This occurs in the Forward servlet. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: defer key slot crypto freeing to workqueue
Key slots are released through a kref and the existing release path
frees the AEAD transforms from an RCU callback. That is not safe for all
crypto implementations: crypto_free_aead can sleep, for example when an
async or hardware implementation has teardown work to complete.
Use queue_rcu_work for key-slot release. This keeps the RCU grace period
needed by lockless key-slot readers, but runs the actual crypto teardown
from workqueue context where sleeping is allowed. Once the rcu_work
callback runs, pre-existing RCU readers are gone, and the final kref put
already proves that no transform user remains, so the worker can release
the AEAD transforms and free the slot directly.
The previous patch drains ovpn_wq during module exit, so queued key-slot
teardown work cannot outlive module text. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. |
