| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix potential UAF in aa_replace_profiles
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: amd-mp2: Unregister callback on adapter add failure
amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI
driver's callback table before the adapter is registered. If
i2c_add_adapter() fails, probe returns and devres frees the context,
but the PCI driver can still dereference the stale pointer from its IRQ
and system-sleep callbacks.
Unregister the callback before returning the adapter registration error. |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: core: tracing: Do not dereference pointers in TP_printk()
The trace events in drivers/ufs/core/ufs_trace.h were converted to take a
pointer to the hba structure as an argument for the tracepoint and then in
TP_printk() the printing of the dev_name from the ring buffer was
converted to using the dev dereferenced pointer from the hba saved
pointer.
This is not allowed as the TP_printk() is executed at the time the trace
event is read from /sys/kernel/tracing/trace file. That can happen
literally, seconds, minutes, hours, weeks, days, or even months later!
There is no guarantee that the hba pointer will still exist by the time it
is dereferenced when the "trace" file is read.
Instead, save the device name from the hba pointer at the time the
tracepoint is called and place it into the ring buffer event. Then the
TP_printk() can read the name directly from the ring buffer and remove the
possibility that it will read a freed pointer and crash the kernel.
This was detected when testing the trace event code that looks for
TP_printk() parameters doing illegal derferences[1]
[1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| Stomper 5e2741e is vulnerable to Use-After-Free. When a single client repeatedly issues SUBSCRIBE commands for the same destination over one connection and then closes that connection, the broker performs incorrect cleanup of its internal subscription structures. This results in a heap use-after-free during StompClient destruction, causing the broker process to crash. An unauthenticated client can exploit this to reliably trigger a denial of service. |
| Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: finish crypto callback cleanup before peer release
Crypto completion callbacks hold both key-slot and peer references. The
peer reference pins the netdev, and dropping the last peer reference can
let netdev unregistration and module removal make progress.
Do not release that peer reference before the callback has finished its
own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can
schedule an RCU callback backed by module text after ovpn_cleanup
rcu_barrier has already run. The TX error path also freed the remaining
skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev
lifetime window.
Release the key slot and free any remaining skb first, then drop the peer
reference as the last callback action. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition
In atmci_probe, &host->bh_work is bound with atmci_work_func, and
atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all
queue this work on system_bh_wq.
If we remove the module, atmci_remove makes cleanup and the memory
allocated for host with devm_kzalloc() is released after the remove
callback returns, while the work mentioned above may still be pending
or running. The sequence of operations that may lead to a UAF bug is
as follows:
CPU0 CPU1
| atmci_interrupt
| queue_work(system_bh_wq,
| &host->bh_work)
atmci_remove |
atmci_cleanup_slot(...) |
atmci_writel(host, ATMCI_IDR, ~0UL) |
timer_delete_sync(&host->timer) |
dma_release_channel(host->dma.chan) |
free_irq(platform_get_irq(pdev, 0), host) |
| atmci_work_func
| // use host
// devm resources released after |
// remove returns, host is freed |
| // use host (use-after-free)
Fix it by canceling the work after all the sources that can schedule
it (IRQ handler, timeout timer and DMA completion callback) have been
stopped, and before proceeding with the remaining cleanup in
atmci_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free of the socket by its timers
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix advertising data UAFs
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| Use after free in DOM in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: Fix UAF at delayed release of MIDI2 EPs
The recent fix for UAF in ump_to_endpoint() caused another UAF because
it tries to dereference the UMP endpoint object, but this might be
executed at a delayed context where the endpoint has been already
released.
Add private_free to clear the associated data for avoiding the further
dereference for delayed releases. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix use-after-free of cached ASCONF chunk
addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal
ASCONF-ACK completion path releases the chunk and clears the pointer.
However, sctp_asconf_queue_teardown() releases the cached chunk without
clearing addip_last_asconf. During peer restart handling,
sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes
sctp_asconf_queue_teardown() while the association remains alive and leaves
the pointer dangling.
A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(),
which accesses the stale chunk and passes it to sctp_process_asconf_ack(),
causing a use-after-free and a second release.
Clearing the pointer exposes a race with T4 expiry. Peer restart handling
queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses
timer_delete(), which does not wait for a callback already running on
another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after
the purge and dereference NULL.
Clear addip_last_asconf after releasing the cached chunk, and make
sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding
ASCONF remains. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix sk_redir use-after-free in send verdict
sk_psock_msg_verdict() takes a socket reference for psock->sk_redir.
tcp_bpf_send_verdict() copies that pointer while holding the source socket
lock, but does not take a reference for the local copy before dropping the
lock around tcp_bpf_sendmsg_redir().
When apply_bytes keeps the cached verdict active, another sendmsg() on the
same source socket can consume the remaining bytes and release the cached
reference while the first thread still holds only the raw local pointer:
CPU 0 CPU 1
sk_redir = psock->sk_redir
apply_bytes remains nonzero
release_sock(sk)
lock_sock(sk)
apply_bytes reaches zero
psock->sk_redir = NULL
release_sock(sk)
tcp_bpf_sendmsg_redir(sk_redir)
sock_put(sk_redir)
tcp_bpf_sendmsg_redir(sk_redir)
The final sock_put() can free sk_redir before CPU 0 dereferences it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020
Read of size 8 at addr ffff888108537090 by task poc/87
Call Trace:
tcp_bpf_sendmsg_redir+0xf39/0x1020
tcp_bpf_sendmsg+0x977/0x1a50
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 85:
sk_prot_alloc+0x56/0x210
sk_clone+0x6f/0x14b0
inet_csk_clone_lock+0x24/0x740
tcp_create_openreq_child+0x25/0x2710
tcp_v4_syn_recv_sock+0x10a/0xe00
Freed by task 0:
__kasan_slab_free+0x43/0x70
slab_free_after_rcu_debug+0xa6/0x1e0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__sk_destruct+0x3da/0x540
sk_psock_destroy+0x81e/0xab0
process_one_work+0x63a/0x1070
Take a temporary socket reference while the source socket lock still
protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir()
returns. This keeps each unlocked use independent of cached-verdict
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: avoid refilling the RX queue after teardown
Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()")
made the RX worker jump to its common exit when rx_run is clear. That
exit still refills the RX queue when the buffer count is low, so work
queued across virtio_vsock_vqs_del() can add buffers after the virtqueues
have been deleted.
BUG: KASAN: slab-use-after-free in virtqueue_add_sgs
Read of size 4 by task kworker/0:1
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796)
virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332)
virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Freed by task 141:
kfree (mm/slub.c:6566)
vp_del_vq (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912)
virtio_device_freeze (drivers/virtio/virtio.c:658)
virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601)
pci_pm_freeze (drivers/pci/pci-driver.c:1098)
device_suspend (drivers/base/power/main.c:1968)
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Jump to a no-refill exit when rx_run is clear, leaving the normal exit
to replenish a running queue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/dibs: Correct freeing of dmb_clientid_arr
A dibs device interrupt handler can be active after dibs_dev_del() and
may still access dmb_clientid_arr. (UAF)
In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe()
dmb_clientid_arr is freed twice (double free).
Free dmb_clientid_arr in dibs_dev_release() after last reference is gone.
Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok
for now, because no dmbs can be registered before dibs_dev_add(). |
