| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs: autofs: fix memory leak in autofs_fill_super()
In autofs_fill_super(), we create a new inode using
autofs_new_ino(), however, if we fail to create root_inode,
(that is, root_inode failure path), we return -ENOMEM without
freeing the new inode(ino) that we created causing a memory leak.
Fix this by adding autofs_free_ino() to free the inode we created
in root_inode failure path before returning ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vfb: defer cleanup until the last reference
FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the
usercopy after dropping info->lock. vfb_remove() frees the colormap
immediately after unregistering the framebuffer, even when an open file
still holds a reference to fb_info. A concurrent driver unbind can
therefore free the colormap while the ioctl copies it to userspace.
KASAN reports:
BUG: KASAN: slab-use-after-free in _copy_to_user
Read of size 512 by task poc/125
_copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24)
fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211)
do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114)
Allocated by task 1:
fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108)
vfb_probe (drivers/video/fbdev/vfb.c:459)
Freed by task 124:
fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151)
vfb_remove (drivers/video/fbdev/vfb.c:489)
unregister_framebuffer() drops the registration reference, and fbdev calls
fb_destroy after the last put_fb_info(). Move the registered framebuffer's
cleanup into an fb_destroy callback so its colormap and screen buffer stay
alive until all file references have been released. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reject invalid states in connection template sync records
IPVS sync receivers validate protocol states before creating or updating a
connection. For connection templates, however, they only log states outside
the template state range and still store the value in the connection.
A template can be returned by ordinary connection lookup. TCP and SCTP then
use the invalid state as an index into their transition tables.
Reject invalid template states in both sync protocol versions before
looking up or modifying a connection. The version 1 path handles both
IPv4 and IPv6 records. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm
In function ctr_aes_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. When the buffer is used
explicitly scrub it at the end of the code block to avoid exposure of
maybe sensitive data.
In a similar way the function gcm_aes_crypt() hat an error path where
the CPACF param block was not scrubbed. Instead of return early now
these error paths go to end of function where explicit scrubbing is
done. Similar with the buffers which are part of the gcm_sg_walk
structs from the variables gw_in and gw_out. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Don't free the live ring's TPA state on queue restart failure
bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone:
memcpy(clone, rxr, sizeof(*rxr));
the code currently clears pointers that the clone owns (such as
rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory
of the live ring that was cloned.
If an allocation failure happens later and the err_free_tpa_info label
is taken, the live ring's memory can be freed while still in use.
Fix this by initializing the clone's pointers to NULL to prevent live
ring state from being freed inadvertently. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate RX ring init failures in bnxt_init_nic()
bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring()
fails, but bnxt_init_nic() discards that return value and calls
bnxt_init_chip(), which enables TPA.
If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed
and TPA would be enabled over an array with zeroed entries. This would
lead to a zeroed DMA address being handed out if the agg_idx is
translated to a SW index at a zeroed entry.
Fix this by propagating the error out of bnxt_init_nic(). Both callers
already check its return value and unwind with bnxt_free_skbs() and
bnxt_free_mem(), which tolerate a partially initialized RX ring. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc()
bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation
fails. This leaves the remaining rxr->rx_tpa[] entries zeroed.
bnxt_queue_mem_alloc() discards that return value, so the partially
initialized ring is installed by bnxt_queue_start().
Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps
it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized
slot can be chosen which would hand a zero DMA address to the device.
Fix this by checking the return value of bnxt_alloc_one_tpa_info_data
and unwinding, freeing the ring buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Prevent queue stop with deferred completions
When the driver receives a burst of packets, it can mark a BD with the
NO_CMPL bit to defer completions. The expectation is that the last
packet in the ring will have this bit unset and the completion generated
by that packet will cleanup that packet and the ones preceding it. This
helps to reduce the number of completions fired.
The suppressed completions are controlled by the driver and the number
of packets with suppressed completions scales with the size of the ring.
SW USO packets, on the other hand, have an upper bound on the maximum
number of BDs which can be consumed which does not scale with the ring
size.
So, for small rings it is possible that: a burst of packets is handed to
the driver, the driver defers completions for all of the packets because
the number of free descriptors stays above the threshold in the driver.
Then, a USO packet arrives, but the number of BDs available is not
enough and the USO code exits early.
In this case, you end up in a state where the ring is full of packets
with their completions suppressed, which can cause the queue to stop and
never be restarted.
Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small
rings (<= 457 descriptors, below the driver default value) when
a burst of packets fills the ring, followed by a large USO packet that
can't fit. For larger rings, the delta between the completion
suppression threshold and the BDs required for SW USO is large enough
that completions will fire and this case is unreachable.
This issue was pointed out by Sashiko and while it seems fairly unlikely
given that the queue size must be small to trigger this, it is indeed
possible.
Fix this by tracking the last BD which deferred completions and
centralizing the logic for deciding when to ring the doorbell. The NO_CMPL
bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is
covered, including the SW USO early exit. This guarantees the ring always
ends in a BD which generates a completion to clean it and wake the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: syncookies: remember the request backup flag
Instead of using an uninitialised bit when copying the info in
subflow_ulp_clone().
To fix this, no need to extend the join_entry structure: backup is
coming from struct mptcp_subflow_request_sock, only one bit. Do the same
here by using one bit for both. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
The SMB1 synchronous read helper CIFSSMBRead() validates the server's
DataLength against CIFSMaxBufSize and the caller's count, but never
validates DataOffset. The copy source is formed as
&pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset)
and memcpy()'d for DataLength bytes with no check that the
[DataOffset, DataOffset + DataLength) range lies within the response
actually received from the server.
A malicious or compromised SMB1 server can return a response carrying
an in-range DataLength and a large DataOffset, driving the source
pointer past the end of the response buffer. The memcpy() then copies
adjacent kernel heap into the caller's read buffer (information
disclosure), or reads unmapped memory and oopses (denial of service).
SMB1 is not negotiated by default; reaching this code requires an
explicit vers=1.0 mount.
Both DataOffset and the received response length recorded in
rsp_iov.iov_len are relative to the start of the SMB header, so reject
the response unless DataOffset + DataLength fits within that length,
using overflow-safe arithmetic, before forming the source pointer.
The response length has been validated by the previous patch, so the
DataOffset and DataLength fields can be read safely here.
While here, make data_length unsigned. It holds a length derived from
unsigned on-the-wire fields and is only ever compared against unsigned
quantities; print it with %u accordingly, and add __func__ to the
cifs_dbg() calls in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted server to dictate local file ownership even
when the mount was configured to force specific uid/gid values.
Fix all three call sites to check CIFS_MOUNT_OVERR_UID and
CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the
same pattern already used by cifs_unix_basic_to_fattr() for unix
extensions. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix one-byte OOB read in smb2_parse_native_symlink()
When parsing a share-root relative native symlink, memcpy copies
smb_target+1 (skipping the leading separator) but uses
strlen(smb_target)+1 as the length, reading one byte past the
allocated buffer.
This fixes the following KASAN splat when accessing an SMB symlink
with a target of '\a\b':
BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0
Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1
CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N
7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix,
1996)
Call Trace:
<TASK>
dump_stack_lvl+0x7b/0xa0
print_report+0xd0/0x630
kasan_report+0xe5/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
smb2_parse_native_symlink+0x4f5/0xca0
parse_reparse_point+0x68a/0x1530
reparse_info_to_fattr+0x752/0xa20
cifs_get_fattr+0x873/0x15b0
cifs_get_inode_info+0xc0/0x310
cifs_lookup+0x308/0xa70
__lookup_slow+0x122/0x2b0
lookup_slow+0x50/0x70
path_lookupat+0x525/0xaf0
filename_lookup+0x1f2/0x550
vfs_statx+0xd1/0x1a0
vfs_fstatat+0x65/0xc0
__do_sys_newfstatat+0x9a/0x120
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime. |
