Export limit exceeded: 24353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 16198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52924 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-89448 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu(). | ||||
| CVE-2026-43502 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path. | ||||
| CVE-2021-36081 | 2 Linux, Tesseract-ocr | 2 Linux Kernel, Tesseract Ocr | 2026-09-14 | 7.8 High |
| Tesseract OCR 5.0.0-alpha-20201231 has a one_ell_conflict use-after-free during a strpbrk call. | ||||
| CVE-2026-81005 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this failed-registration rollback path. Therefore, the asynchronous redo_bmc_reg work item can still retry BMC device-id probing after the lower driver has already cleared its SI state machine data. In the observed case, that retry path reached start_next_msg(), which passed the NULL smi_info->si_sm pointer to the selected KCS state machine handler: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Workqueue: events redo_bmc_reg [ipmi_msghandler] RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si] Call Trace: start_next_msg+0x50/0x80 [ipmi_si] check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si] sender+0x69/0x80 [ipmi_si] i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler] __get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler] __bmc_get_device_id+0xef/0x950 [ipmi_msghandler] redo_bmc_reg+0x52/0x60 [ipmi_msghandler] process_one_work+0x1a7/0x360 Set intf->in_shutdown on the out_err_started path before invoking the lower driver's shutdown callback. This prevents later redo_bmc_reg retries from using an interface whose lower driver state has been cleaned up, and applies the same shutdown state to other IPMI interfaces as well. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | ||||
| CVE-2026-89765 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: timers/itimer: Zero-init old itimerval before copy to userspace On native sparc64, struct __kernel_old_timeval contains a four-byte hole after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit. put_itimerval() fills only the named fields in a stack-allocated __kernel_old_itimerval and copies the entire object to userspace, so getitimer() can expose the two padding holes. Zero-initialize the aggregate before assigning the fields so implicit padding is deterministic before it crosses the user/kernel boundary. | ||||
| CVE-2026-89756 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent state, and the migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the Tasks-RCU grace period for minutes, which is common at Meta fleet: INFO: rcu_tasks detected stalls on tasks: 0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task Call Trace: tdp_mmu_zap_leafs tdp_mmu_next_root gfn_to_pfn_cache_invalidate_start kvm_mmu_notifier_invalidate_range_start __mmu_notifier_invalidate_range_start try_to_migrate_one try_to_migrate migrate_pages_batch migrate_pages compact_zone compact_node kcompactd kthread Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even when cond_resched() does nothing. This has also been discussed at [1] | ||||
| CVE-2026-89753 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded time, and the scan loop in shrink_lruvec() only calls cond_resched(), which is a no-op on PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent state, so the reclaiming task never reports one and becomes a holdout. Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state even when cond_resched() does nothing. PS: This has been discussed in [1] | ||||
| CVE-2026-89752 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operations only per open file, so separate open files can update the same memory.high or memory.max file concurrently. Both handlers store the new limit before synchronous reclaim, but continue to use the writer's local target in the reclaim loop. If another writer raises or removes the limit, the first writer can continue reclaiming toward a stale target. For memory.max, this can leave the writer looping indefinitely once reclaim retries are exhausted. The OOM path sees sufficient margin under the current limit and returns true without killing, while the writer still compares usage against its stale target and records another OOM event. Check the current limit at the start of each reclaim iteration and stop if it no longer matches the writer's target. Reproducer: Populate a cgroup with anonymous memory and disable swapping. Lower memory.max from one open file, then restore it to "max" through another open file after the new limit becomes visible. Without the patch, the first writer remains blocked and repeatedly increments the OOM event counter. With the patch, it returns normally. This was not motivated by a reported production workload. We found it through automated randomized testing for our cgroup observability work and reduced it to the reproducer above. | ||||
| CVE-2026-89751 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation. | ||||
| CVE-2026-89750 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44 Call Trace: <TASK> kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 current_user_event_mm+0x51/0x1d0 user_events_ioctl+0x82e/0x15c0 __x64_sys_ioctl+0x139/0x1c0 do_syscall_64+0xce/0x450 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 44: __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x180/0x3a0 user_event_mm_alloc+0x3c/0x1f0 current_user_event_mm+0x88/0x1d0 Freed by task 42: __kasan_slab_free+0x43/0x70 kfree+0x13a/0x390 process_one_work+0x696/0xf90 worker_thread+0x420/0xba0 The fix simply clears the copied pointer before any possible failure. In case of failure, the child then has nothing to free. | ||||
| CVE-2026-89749 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). | ||||
| CVE-2026-89746 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger The third write panics the kernel: BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290 Read of size 8 at addr ffff888001f8a0e0 by task sh/1 CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N Call Trace: find_var_file.part.0 find_event_var parse_atom parse_expr __create_val_field event_hist_trigger_parse trigger_process_regex event_trigger_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Allocated by task 1: event_hist_trigger_parse Freed by task 1: hist_register_trigger+0x618/0xa30 event_hist_trigger_parse The buggy address belongs to freed 2048-byte region Oops: general protection fault ... RIP: find_var_file.part.0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix by removing the hist_data from tr->hist_vars and releasing the trace_array reference in the named-data branch of hist_register_trigger() before freeing the hist_data. | ||||
| CVE-2026-89744 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL │ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1 │ │ fwnode_get_next_child_node(FWa, FWb1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1 └────┘ This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}. The root cause is that when the current child (FWb1) belongs to the secondary fwnode, calling get_next_child_node() on the parimary fwnode incorrectly returns the first child (FWa1) again instead of NULL. Fix this by dynamically checking the parent fwnode of the current child before calling get_next_child_node(). This approach follows the pattern established in commit b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()"). | ||||
| CVE-2026-89742 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO mport character device interface. | ||||
| CVE-2026-89741 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not really a good way of fixing this without breaking video_register_device() into two parts, one that initializes everything, and one that does the actual device_register, and then converting all V4L2 drivers to this new model. That is a massive job, and it is very unlikely that device_register will fail. So rather than ending up in a double-free scenario, just revert this patch, and in that case we'll have a small memory leak. Which is a lot more robust. | ||||
| CVE-2026-89736 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free (UAF) memory corruption. Fix this issue by deferring the destruction of struct snd_uac_chip until all references to the ALSA sound card are released. Register a custom card->private_free callback (u_audio_card_free) during g_audio_setup() that frees uac and its associated playback/capture request and ring buffers only when the sound card reference count drops to zero. | ||||