| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when the rewrite directive is followed by a rewrite, if, or set directive and an unnamed Perl-Compatible Regular Expression (PCRE) capture (for example, $1, $2) with a replacement string that includes a question mark (?). An unauthenticated attacker along with conditions beyond its control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: fix mask build for partial field offload
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes. |
| Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in an array item default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0. |
| ApostropheCMS is an open-source Node.js content management system. In 4.32.0 and earlier, PATCH /api/v1/article/:id accepts the inherited path toString.call and passes it through the utility module to apos.util.set() and apos.util.get(), allowing an authenticated editor to overwrite the shared Object.prototype.toString function's call property and cause a persistent process-wide denial of service until restart. |
| A security flaw has been discovered in alibaba-fusion next up to 1.27.34. This issue affects the function ConfigProvider.getContextProps of the file components/dialog/index.tsx of the component deepMerge. Performing a manipulation of the argument locale results in improperly controlled modification of object prototype attributes. The attack may be initiated remotely. The reported GitHub issue was closed automatically due to inactivity. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper calculation of a memory offset during IPsec decapsulation. |
| A flaw has been found in Dromara UJCMS up to 10.1.3. The impacted element is the function update of the file src/main/java/com/ujcms/cms/ext/web/backendapi/WebFileTemplateController.java of the component web-file-template Endpoint. Executing a manipulation can lead to improper neutralization of special elements used in a template engine. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability was identified in rexrainbow phaser3-rex-notes up to 1.80.17. This vulnerability affects the function SetValue of the file plugins/utils/object/SetValue.js of the component BehaviorTree Blackboard Data Interface. Such manipulation of the argument key leads to improperly controlled modification of object prototype attributes. The attack can be launched remotely. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra: Fix burst size calculation
Currently, the Tegra GPC DMA hardware requires the transfer length to
be a multiple of the max burst size configured for the channel. When a
client requests a transfer where the length is not evenly divisible by
the configured max burst size, the DMA hangs with partial burst at
the end.
Fix this by reducing the burst size to the largest power-of-2 value
that evenly divides the transfer length. For example, a 40-byte
transfer with a 16-byte max burst will now use an 8-byte burst
(40 / 8 = 5 complete bursts) instead of causing a hang.
This issue was observed with the PL011 UART driver where TX DMA
transfers of arbitrary lengths were stuck. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix undefined shift of user RQ WQE size
set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on
the user-provided rq_wqe_shift, which is only checked to be greater than
32, so shifts of 32 are still accepted. A shift of 31 also overflows a
signed integer, leading to undefined behavior.
Use check_shl_overflow() to compute the RQ WQE size and reject any
invalid values. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
Look up the IRQ index in oct_hw->irqs instead of assuming
irq - irqs[0]. This supports non-contiguous IRQ numbers and
avoids incorrect ring indexing when irqs[0] is not the base. |
| A vulnerability was found in xianrendzw EasyReport up to 2.0.17.0522_Beta. Affected is the function execSqlText/previewSqlText of the file DesignerController.java of the component SQL Preview Endpoint. The manipulation of the argument sqlText results in improper neutralization of special elements used in a template engine. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in a header parameter default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: fix double free of out_cvts on rawmidi error
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Unauthenticated Remote Code Execution (RCE) in JetEngine <= 3.8.14 versions. |
| Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in a schema default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0. |
