| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Valhalla is an open source routing engine and accompanying libraries for use with OpenStreetMap data. In 3.7.0 and earlier, a POST request to /sources_to_targets containing an exclude_polygons ring formed by three collinear points can cause unbounded memory growth in the worker. The zero-area geometry, rather than the other request options, triggers processing in src/loki/polygon_search.cc until the process is terminated by the out-of-memory killer. A single unauthenticated request can therefore stop a public-facing worker. Other endpoints that accept exclude_polygons, including /route, were not verified as affected. No fixed version is available as of this review. |
| Caddy is an extensible server platform that uses TLS by default. In version 2.11.3 and earlier, three configuration-dependent weaknesses affect the handler and placeholder layer. In modules/caddyhttp/rewrite/rewrite.go, Rewrite.Rewrite() can pass attacker-controlled replacement bytes through buildQueryString for a second placeholder expansion when a rewrite URI ends with a literal question mark, allowing injected environment or request-variable placeholders to disclose data and, when the file provider is registered, allowing injected file placeholders to disclose readable files. The issue is fixed in version 2.11.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free pending qentry in smc_llc_flow_stop() before memset
smc_llc_flow_stop() resets a flow struct with a blind memset:
spin_lock_bh(&lgr->llc_flow_lock);
memset(flow, 0, sizeof(*flow));
flow->type = SMC_LLC_FLOW_NONE;
spin_unlock_bh(&lgr->llc_flow_lock);
If flow->qentry is non-NULL at this point the pointer is overwritten without the
allocation being freed, leaking one kmalloc object.
A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set
flow->qentry after the legitimate message has been consumed by the waiter via
smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type
non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that
window the duplicate is stashed into flow->qentry, and then lost when
smc_llc_flow_stop() zeros the struct.
Call smc_llc_flow_qentry_del() inside the lock before the memset.
smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the
normal case where no entry is pending is a no-op. |
| QND contains an improper access control vulnerability in a named pipe, which may allow a local attacker who is logged in to a Windows PC where the affected product's client is installed to execute arbitrary commands with SYSTEM privileges. |
| On affected platforms running Arista EOS with gRPC Network Security Interface (gNSI) Credentialz configured, a specially crafted request can cause unintended modifications to the target account's properties. This may result in the account being assigned elevated privileges or access beyond what an administrator intended. |
| OpenSlide is a C library for reading whole slide image files. Prior to 4.0.1, a behavior change in libtiff 4.7.1 causes the indirect TIFF tile path in src/openslide-decode-tiff.c and _openslide_tiff_read_tile() to request a full-height destination for a partial bottom tile row, allowing uninitialized heap memory to enter pixel data returned by openslide_read_region(). A crafted but valid slide can trigger the issue in TIFF-based formats other than Hamamatsu NDPI when a network service renders attacker-provided slides. Successful extraction depends on pixel transparency handling and recompression, OpenSlide with libtiff 4.7.0 or earlier is not affected, and official binary builds 4.0.0.10 and 4.0.0.11 are affected. This issue is fixed in OpenSlide 4.0.1 and official binary build 4.0.0.12. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. Prior to 5.9.2, devalue.parse does not reject out-of-bounds indices that are greater than or equal to values.length in src/parse.js. A specially crafted untrusted payload can make the parser alternate between array representations, producing quadratic work as the payload grows and causing denial of service in applications that parse untrusted devalue data. This issue is fixed in version 5.9.2. |
| CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC request paths in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack on attacker-controlled DNS section counts before dns.DefaultMsgAcceptFunc validates the fixed header. An unauthenticated client can use DNS name compression and excessive section counts to amplify allocation before the plugin chain, so plugin-level rate limiting cannot prevent concurrent requests from exhausting memory and terminating CoreDNS. The ordinary UDP and TCP listeners are not affected because they validate the header first. This issue is fixed in version 1.14.7. |
| Redocly CLI makes OpenAPI validation, linting, and documentation workflows easier. Prior to @redocly/cli 2.33.2, the split command constructs output paths under --outDir from untrusted OpenAPI or AsyncAPI component names and x-codeSamples lang values without verifying that the resolved target remains inside the selected directory. A description containing literal ../ traversal segments in those fields can cause the split command to place or overwrite files outside --outDir. Component data remains constrained to YAML or JSON, and code-sample filenames remain based on the HTTP method, so this is not an unrestricted arbitrary-content file write. This issue is fixed in @redocly/cli version 2.33.2. |
| A vulnerability in the IPsec Open API endpoint of Cisco ISE could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system.
This vulnerability is due to insufficient validation of user-supplied input in IPsec Open API calls. An attacker could exploit this vulnerability by sending crafted input to the IPsec Open API endpoint on an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system.
To exploit this vulnerability, the attacker must have valid administrative credentials and the node must have more than one network interface, one of which must be configured as an active IPsec tunnel.
Note: For CVE-2026-20283, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
| IBM Guardium Data Protection 12.2 is vulnerable to OS command injection in the Universal Connector plugin upload functionality. A privileged authenticated attacker can provide a malicious filename that is incorporated into a shell command executed by the application, potentially resulting in arbitrary command execution with root-level privileges. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary JavaScript code due to improper neutralization of input during web page generation. |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. In 0.9.10 and earlier, psd_private_sail_pixel_format() in src/sail-codecs/psd/helpers.c resolves a one-channel PSD in Bitmap color mode to SAIL_PIXEL_FORMAT_BPP1_INDEXED without requiring the file depth to be one, so the pixel buffer uses one-bit rows while sail_codec_load_frame_v8_psd() in src/sail-codecs/psd/psd.c accepts depth == 8 and writes one attacker-controlled byte per pixel. Loading a crafted PSD through sail_load_from_file() or sail_load_from_memory() therefore writes beyond each heap row, causing memory corruption, a reliable crash, or potential code execution. This mode/depth mismatch is distinct from GHSA-rcqx-gc76-r9mv and GHSA-wcj8-hxxf-pq2c. This issue is fixed in version 1.0.0. |
| OmniBlocks is a monorepo for the OmniBlocks project. Prior to the June 6, 2026 workflow remediation, .github/workflows/disc.yml runs for the issues opened event and the issues edited event and invokes the createDiscussion mutation whenever an issue is classified as off-topic, without recording that the issue was already converted or otherwise suppressing duplicate runs. A user who creates one off-topic issue and repeatedly edits its description before conversion completes can therefore cause multiple discussions to be created for the same issue, producing discussion spam and additional moderation work. This issue is fixed with commit 627e0f0a16a7d74b09128106b57dd7e85d2545df. |
| An OS Command Injection vulnerability in TP-Link Archer BE230 v1.2 and BE3600 v1 (vpn modules) allows adjacent
authenticated
attacker
execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability.
This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID.
This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420. |
| An OS Command Injection vulnerability in TP-Link Archer BE230 v1.2(vpn modules) and BE3600 v1 allows adjacent
authenticated
attacker
execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability.
This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID.
This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420. |
| A weakness has been identified in PbootCMS up to 3.2.22. This affects the function decode_string of the file apps/admin/controller/content/ContentController.php of the component Template Rendering. This manipulation of the argument Title causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The reported GitHub issue was closed with the reason "completed". |
