| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark raw_tp arguments with PTR_MAYBE_NULL
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: change folios array from kmalloc to kvmalloc
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] <TASK>
[ 4080.879473] ? __alloc_pages+0x2c8/0x350
[ 4080.879475] ? __warn.cold+0x8e/0xe8
[ 4080.880647] ? __alloc_pages+0x2c8/0x350
[ 4080.880909] ? report_bug+0xff/0x140
[ 4080.881175] ? handle_bug+0x3c/0x80
[ 4080.881556] ? exc_invalid_op+0x17/0x70
[ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20
[ 4080.882077] ? udmabuf_create+0x131/0x400
Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB
memory, each array entry is pointer(8byte), so can save 524288 pages(2GB).
Further more, costly order(order 3) may not be guaranteed that it can be
applied for, due to fragmentation.
This patch change udmabuf array use kvmalloc_array, this can fallback
alloc into vmalloc, which can guarantee allocation for any size and does
not affect the performance of kmalloc allocations. |
| A malicious SVG can trigger an integer overflow which in turn triggers a null-pointer dereference in VectorImage QML Type. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Apache Johnzon.
ClassConverter loads & static-initializes an attacker-named class from untrusted JSON.
This issue affects Apache Johnzon: from 1.0.0 before 2.2.0.
Users are recommended to upgrade to version 1.3.1 (javax namespace) or 2.2.0 (jakarta specification namespace), which fixes the issue. |
| FreeRDP 3.0.0-beta4 before 3.32.0 contains a NULL pointer dereference in arm_handle_request_ok when an ARM endpoint returns an empty HTTP 200 body. Attackers controlling the configured ARM gateway can return a zero-length body to pass NULL to strnlen and crash the connecting client. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: leave the MDIO IRQ mappings to regmap-irq
mt7530_remove_common() disposes the per-PHY interrupt mappings from
.remove, but the regmap-irq chip that owns the domain is devm-registered,
so its parent interrupt is only freed once .remove has returned. The
switch's own regmap-irq thread can therefore still dispatch on a mapping
that is already gone: irq_find_mapping() returns 0, irq_to_desc() returns
NULL and handle_nested_irq() locks desc->lock without checking it. The
attached PHYs have not given those interrupts back yet either, which the
kernel warns about a moment before the fault.
regmap_del_irq_chip() disposes the same mappings itself, after freeing the
parent interrupt and before removing the domain, so there is nothing left
for the driver to do here. Until it runs the descriptors stay alive, and a
late dispatch on one of them is harmless: dsa_unregister_switch() has freed
the PHY handlers by then, so handle_nested_irq() finds no action and
returns. |
| A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the rpc_rx_fsm function when msglen is set to 0. |
| The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it.
The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server.
The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel.
The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. |
| A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the on_disconnected callback function. |
| A NULL pointer dereference in the avpriv_h264_has_num_reorder_frames function of Ffmpeg version N-119856-gbe46370941 allows attackers to cause a Denial of Service (DoS) via processing a crafted media file. |
| A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the rpc_rx_fsm function. |
| An issue exists in Amazon Redshift JDBC Driver versions prior to 2.2.2. Under certain conditions, the driver could load and execute arbitrary classes when processing JDBC connection URL parameters. An actor who can influence the connection URL could potentially execute code in the application context, provided a suitable class is available on the application's classpath.
To mitigate this issue, users should upgrade to version 2.2.2 or later. |
| Apache ActiveMQ Artemis before 2.34.0 contains an unsafe reflection vulnerability in FederationStreamConnectMessage.getFederationPolicy(). The method calls Class.forName(clazz).getConstructor().newInstance() where clazz is read directly from the CORE protocol wire buffer without type validation. An authenticated federation peer can send a FEDERATION_DOWNSTREAM_CONNECT packet with a crafted class name, causing the broker to load and instantiate arbitrary classes visible to the Artemis module classloader. Static initializers (<clinit>) and no-argument constructors (<init>()) execute as side effects before the type cast, enabling denial of service via system-property poisoning, out-of-memory conditions via classloading, or broker state manipulation. |
| A NULL pointer dereference vulnerability in the logs management functionality could allow an unauthenticated attacker to crash the service. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm->arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow stage 2 page
tables") introduced the teardown of the entire nested MMU range, which then
invokes stage2_apply_range() with resched=true:
mmu_notifier_invalidate_range_start()
-> ... -> kvm_mmu_notifier_invalidate_range_start()
-> kvm_mmu_unmap_gfn_range()
-> kvm_unmap_gfn_range()
-> kvm_nested_s2_unmap()
-> kvm_stage2_unmap_range()
-> __unmap_stage2_range()
-> stage2_apply_range()
This means that stage2_apply_range() can drop the kvm->mmu_lock and thus
concurrent progress can be made in lockstep with
kvm_arch_flush_shadow_all().
If kvm_arch_flush_shadow_all() advances ahead of stage2_apply_range() and
completes its operation it guarantees a NULL pointer deref.
Since kvm_free_stage2_pgd() is performed under the kvm->mmu_lock this will
either be observed NULL or not and serialised against
kvm_free_stage2_pgd().
Resolve the issue by abstracting the invalidation to a new function,
kvm_invalidate_vncr_ipa_all(), and check that the pgt is non-NULL before
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: fix restore of partially initialized client
I got a null-ptr-deref report when closing a DRM file descriptor:
WARNING: drivers/gpu/drm/drm_atomic.c:2031 at
__drm_atomic_helper_set_config+0x18e/0x1b0 [drm]
Call Trace:
drm_client_modeset_commit_atomic+0x16b/0x220 [drm]
drm_client_modeset_commit_locked+0x56/0x160 [drm]
drm_client_modeset_commit+0x21/0x40 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x7b/0x80
drm_fbdev_client_restore+0xe/0x20 [drm_client_lib]
drm_client_dev_restore+0x9f/0xc0 [drm]
drm_release+0xc5/0xe0 [drm]
The warning is followed by a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP:
__drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x41/0x80
[drm_kms_helper]
Call Trace:
drm_fbdev_client_restore+0xe/0x20 [drm_client_lib]
drm_client_dev_restore+0x9f/0xc0 [drm]
drm_release+0xc5/0xe0 [drm]
__fput+0xdc/0x2b0
__x64_sys_close+0x39/0x80
do_syscall_64+0x8d/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
drm_client_register() adds the DRM client to the device client list
before invoking the initial hotplug callback. If the hotplug callback
fails, the client remains registered.
For the fbdev client, a failure during drm_fb_helper_initial_config()
causes the partially initialized fbdev helper to be cleaned up.
drm_fb_helper_fini() releases fb_helper->info and leaves it NULL.
The fbdev client therefore remains registered even though there is no
fully initialized framebuffer device.
Later, when userspace closes the DRM file descriptor, drm_release()
can invoke the restore callbacks of registered DRM clients:
drm_release()
drm_client_dev_restore()
drm_fbdev_client_restore()
drm_fb_helper_restore_fbdev_mode_unlocked()
drm_fbdev_client_restore() currently restores the fbdev state
unconditionally. For a partially initialized fbdev client this can
submit an incomplete modeset state and subsequently access fbdev
state which has not been initialized, resulting in the warning and
NULL pointer dereference above.
drm_fbdev_client_unregister() already uses fb_helper->info to
distinguish a fully probed framebuffer device from a partially
initialized client.
Use the same condition in drm_fbdev_client_restore() and skip restore
if no framebuffer device has been successfully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix NULL dereference in tb_remove_work()
There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():
Thread A Thread B
tb_remove_work()
tb_domain_remove()
mutex_lock(&tb->lock)
tb_stop()
/* doesn't cancel a running callback */
cancel_delayed_work(&tcm->remove_work)
...
tb_switch_remove(tb->root_switch)
tb->root_switch = NULL
mutex_unlock(&tb->lock)
mutex_lock(&tb->lock)
...
/* without checking ->root_switch */
tb_free_unplugged_xdomains(tb->root_switch)
mutex_unlock(&tb->lock)
Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular. It states:
For this reason separate removing the XDomain from the topology data
structures (where we need the lock) from unregistering the device from
the bus (where remove callbacks of the drivers are being called).
tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock. And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer. |
