| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vite a frontend build tooling framework for javascript. In affected versions the contents of arbitrary files can be returned to the browser. `@fs` denies access to files outside of Vite serving allow list. Adding `?import&raw` to the URL bypasses this limitation and returns the file content if it exists. This issue has been patched in versions 5.4.6, 5.3.6, 5.2.14, 4.5.5, and 3.2.11. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Ironic-image is an OpenStack Ironic deployment packaged and configured by Metal3. When the reverse proxy mode is enabled by the `IRONIC_REVERSE_PROXY_SETUP` variable set to `true`, 1) HTTP basic credentials are validated on the HTTPD side in a separate container, not in the Ironic service itself and 2) Ironic listens in host network on a private port 6388 on localhost by default. As a result, when the reverse proxy mode is used, any Pod or local Unix user on the control plane Node can access the Ironic API on the private port without authentication. A similar problem affects Ironic Inspector (`INSPECTOR_REVERSE_PROXY_SETUP` set to `true`), although the attack potential is smaller there. This issue affects operators deploying ironic-image in the reverse proxy mode, which is the recommended mode when TLS is used (also recommended), with the `IRONIC_PRIVATE_PORT` variable unset or set to a numeric value. In this case, an attacker with enough privileges to launch a pod on the control plane with host networking can access Ironic API and use it to modify bare-metal machine, e.g. provision them with a new image or change their BIOS settings. This vulnerability is fixed in 24.1.1. |
| A flaw was found in OpenShift GitOps. Namespace admins can create ArgoCD Custom Resources (CRs) that trick the system into granting them elevated permissions in other namespaces, including privileged namespaces. An authenticated attacker can then use these elevated permissions to create privileged workloads that run on master nodes, effectively giving them root access to the entire cluster. |
| A container privilege escalation flaw was found in certain CodeReady Workspaces images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A flaw was found in QEMU in the uefi-vars virtual device. When the guest writes to register UEFI_VARS_REG_BUFFER_SIZE, the .write callback `uefi_vars_write` is invoked. The function allocates a heap buffer without zeroing the memory, leaving the buffer filled with residual data from prior allocations. When the guest later reads from register UEFI_VARS_REG_PIO_BUFFER_TRANSFER, the .read callback `uefi_vars_read` returns leftover metadata or other sensitive process memory from the previously allocated buffer, leading to an information disclosure vulnerability. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| Async <= 2.6.4 and <= 3.2.5 are vulnerable to ReDoS (Regular Expression Denial of Service) while parsing function in autoinject function. NOTE: this is disputed by the supplier because there is no realistic threat model: regular expressions are not used with untrusted input. |
| A security issue was discovered in Kubernetes where users may be able to launch containers that bypass the mountable secrets policy enforced by the ServiceAccount admission plugin when using containers, init containers, and ephemeral containers with the envFrom field populated. The policy ensures pods running with a service account may only reference secrets specified in the service account’s secrets field. Kubernetes clusters are only affected if the ServiceAccount admission plugin and the kubernetes.io/enforce-mountable-secrets annotation are used together with containers, init containers, and ephemeral containers with the envFrom field populated. |
| A flaw was found in the Open Virtual Network (OVN). Specially crafted UDP packets may bypass egress access control lists (ACLs) in OVN installations configured with a logical switch with DNS records set on it and if the same switch has any egress ACLs configured. This issue can lead to unauthorized access to virtual machines and containers running on the OVN network. |
| Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635. |
| An incomplete fix was shipped for the Rapid Reset (CVE-2023-44487/CVE-2023-39325) vulnerability for an OpenShift Containers. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| When following an HTTP redirect to a domain which is not a subdomain match or exact match of the initial domain, an http.Client does not forward sensitive headers such as "Authorization" or "Cookie". For example, a redirect from foo.com to www.foo.com will forward the Authorization header, but a redirect to bar.com will not. A maliciously crafted HTTP redirect could cause sensitive headers to be unexpectedly forwarded. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers. |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| A flaw was found in OpenShift Console. A Server Side Request Forgery (SSRF) attack can happen if an attacker supplies all or part of a URL to the server to query. The server is considered to be in a privileged network position and can often reach exposed services that aren't readily available to clients due to network filtering. Leveraging such an attack vector, the attacker can have an impact on other services and potentially disclose information or have other nefarious effects on the system.
The /api/dev-console/proxy/internet endpoint on the OpenShift Console allows authenticated users to have the console's pod perform arbitrary and fully controlled HTTP(s) requests. The full response to these requests is returned by the endpoint.
While the name of this endpoint suggests the requests are only bound to the internet, no such checks are in place. An authenticated user can therefore ask the console to perform arbitrary HTTP requests from outside the cluster to a service inside the cluster. |
| Versions of the package cross-spawn before 6.0.6, from 7.0.0 and before 7.0.5 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by crafting a very large and well crafted string. |
| All versions of the package jsonpath-plus are vulnerable to Remote Code Execution (RCE) due to improper input sanitization. An attacker can execute aribitrary code on the system by exploiting the unsafe default usage of vm in Node.
**Note:**
There were several attempts to fix it in versions [10.0.0-10.1.0](https://github.com/JSONPath-Plus/JSONPath/compare/v9.0.0...v10.1.0) but it could still be exploited using [different payloads](https://github.com/JSONPath-Plus/JSONPath/issues/226). |
