| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| An information exposure vulnerability in the job scheduling component of SANnav allows sensitive credentials to be written to application logs in plain text. When scheduled support save jobs or related operational tasks are executed, sensitive parameters including external server passwords and archive protection keys are logged without proper masking. A local or authenticated user with access to application logs or support bundles can view these cleartext credentials, potentially leading to unauthorized access to remote backup targets or protected archives. |
| A logic flaw in Java cache key handling object comparison handling could lead to improper identifier resolution when processing specific user account structures. The issue has been remediated by updating the internal comparison routines to ensure accurate object evaluation and prevent potential identity mismatch conditions. |
| Incorrect Authorization (CWE-863) in project name normalization (ProjectUtil.stripGitSuffix) and ProjectCache eviction logic (ProjectCacheImpl) in Gerrit Code Review versions 2.16.0 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an authenticated user (or an unauthenticated user if the repository was previously public) to cause unauthorized disclosure of private repository content and durable restoration of revoked project-owner administrative privileges via crafted requests using repeated .git suffixes (such as project.git.git) across REST APIs, Gitiles, or SSH Git commands. Because Gerrit strips only a single terminal .git suffix when constructing the logical ProjectCache key while JGit (FileKey.lenient) resolves the suffixed alias to the same canonical bare repository on disk, revoking read access or removing owner rules on the canonical project name fails to evict the cached alias ProjectState during the cache validity window, enabling reads of newly created private commits or writes to refs/meta/config. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-1333) in regex search query predicates (such as RegexProjectPredicate, RegexRefPredicate, RegexPathPredicate, and sibling predicates) and REST regex filter endpoints (RegexListSearcher /projects/?r= and RefFilter /projects/{project}/branches/?r=) in Gerrit Code Review versions 2.1.6 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a denial of service (CPU starvation and JVM heap exhaustion / OutOfMemoryError) via crafted search queries or REST API requests containing regular expressions with large counted repetitions or exponential DFA determinization patterns. Because the user-supplied regular expression is compiled into an unbounded dk.brics.automaton instance (new RegExp(re).toAutomaton()) on the request thread prior to index evaluation or access control visibility filtering, trivial queries can exhaust JVM heap or pin request threads regardless of heap size. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: acpi: validate WGDS table revision index
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix an off-by-1 boundary check
Before looking at the 11th byte, check the length is big enough. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints
before rejecting frames shorter than the frame-control field. After
that, they only require len >= 2 before dispatching into subtype
handlers that assume their fixed fields are present.
The frames that trip this are not shorter than 2 bytes; they are short
relative to their subtype. mwifiex is a concrete in-tree example on the
length side: mwifiex_process_mgmt_packet() only requires a 4-address
ieee80211_hdr plus the 2-byte firmware length prefix before handing the
frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and
removing addr4, pkt_len can be exactly 24: a bare 3-address management
header with no reason-code body. The existing WARN_ON(len < 2) does not
fire on such a frame, and cfg80211_process_deauth() then reads
u.deauth.reason_code as a two-byte access starting at offset 24,
immediately past the 24-byte buffer.
Add a frame-control length gate, then validate each subtype's minimum
frame size in an if/else-if chain that mirrors the dispatch logic. Trace
only after the frame is known to be well-formed.
Side effects of this change:
- The WARN_ON(len < 2) is dropped. It only guarded the frame_control
read, never the subtype fixed fields, and it does not fire on the
frames that actually trigger the out-of-bounds read (which are >= 2).
The len >= 2 check is kept as the guard before dereferencing
frame_control, but without the warning: these are exported callbacks
and a malformed frame from a driver should be dropped silently rather
than backtraced.
- cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype
through disassociation handling; it now silently ignores unrecognised
subtypes. |
| libvips 8.19.0 contains a memory access vulnerability when processing little-endian PFM images. If the PFM text header length is not a multiple of four bytes, the mmap-based loader can expose pixel data at an address that is not properly aligned for float access. vips_avg_scan() subsequently dereferences the buffer through a float pointer, resulting in undefined behavior and process termination on strict-alignment architectures or UBSan-instrumented builds, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data
which only freed n.data, skipping kfree(acl.sd_buf) and leaking
the buffer. Zero-initialize struct xattr_ntacl acl, reorder error
labels to out_free to release acl.sd_buf on all error paths.
2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code
returned success without freeing sd_buf and left stale *pntsd.
Set rc = -EINVAL before jumping to out_free to return error code and
free buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: bound aligned TLV advance in FW parser
Validate ALIGN(tlv_len, 4) against remaining parser length before
consuming bytes from the firmware image.
This avoids length underflow on malformed TLVs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array. |
