| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in sheshbabu zen up to 1.5.0. Affected by this issue is the function dangerouslySetInnerHTML of the file features/notes/NotesEditor.jsx of the component Note Editor. The manipulation leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in the Mediawiki - Cargo extension allows Stored XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0. |
| Time-of-check time-of-use (toctou) race condition in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. |
| RouterOS does not compare the complete RSA public key when matching an SSH authentication request to an authorized user key, checking the key type and modulus but omitting the exponent. Because signature verification uses the client-supplied key, an attacker knowing an authorized RSA modulus can supply a key with exponent one, forge a valid signature, and open an SSH command channel as the target user without the private key.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) |
| MikroTik RouterOS accepts malformed RSA/PKCS#1 v1.5 signatures across RSA-based services, including TLS/X.509 certificate validation and SSH host-key authentication. Because its trust store includes an e=3 root CA, an attacker controlling or redirecting an outbound RouterOS TLS connection can use the root’s public certificate - without its private key - to forge a trusted intermediate and issue certificates for arbitrary hostnames, enabling TLS server impersonation. The same permissive verification also undermines RSA-based SSH authentication.
This issue affects only 7.x branch was fixed in versions: 7.23.6 (Long-term) and 7.24.3 (Stable).
Releases 7.23.4 and 7.24.2 included an incomplete fix. |
| Improper Exposure of Resource to Wrong Sphere in the host file helper (gofer) in Google gVisor prior to commit 573a9e73cf844f on Linux platforms with CUSE enabled allows a local attacker with container image deployment privileges to achieve root code execution on the host system. By including a /dev/cuse character device node in a container image, opening the device passes through to the host, allowing the sandboxed attacker to register a host device and exploit CUSE unrestricted ioctl handling to overwrite root udev helper memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless of the
interface state. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_synctty: ensure a writeable skb header
ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: reset HTB scheduler topology before freeing queues
HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler
queues via otx2_qos_txschq_set_parent_topology(), but teardown freed
those queues without clearing TOPOLOGY. The AF only restores PARENT and
SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the
shared scheduler pool and affect later allocations.
Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero
TL4 through TL2 TOPOLOGY before each schq is returned to the AF during
hierarchy teardown and cfg rollback. Skip the aggregation level (TL1):
it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs,
and is not freed back to the AF by nix_txschq_free_one(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for. |
| A weakness has been identified in Zhonglun CloudPOS 3.0. Affected by this vulnerability is an unknown functionality of the file Program.cs of the component Automatic Update. Executing a manipulation of the argument version/url/packagekey/package name can lead to channel accessible by non-endpoint. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
