| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The MongoDB C# Driver's BSON library contains an uncontrolled resource consumption weakness in its deserialization handling of one BSON value type. An application that deserializes untrusted content with the library retains data derived from that content for the lifetime of the process, with no limit on how much accumulates. An unauthenticated remote party who can cause such content to be deserialized can drive unbounded memory growth, exhausting the host application's available memory and denying service. There is no impact to confidentiality or integrity, and no MongoDB server component is affected. |
| Allocation of resources without limits or throttling in Apache Wicket.
org.apache.wicket.markup.html.form.upload.resource.AbstractFileUploadResource is the server side of the form-less upload offered by FileUploadToResourceField, which posts the selected files to a separately mounted resource rather than through a Form. The resource is an application-wide singleton with no component to consult, so newResourceResponse() takes the three limits that bound the upload - the total request size, the maximum size of a single part and the maximum number of parts - from the request parameters maxSize, fileMaxSize and fileCountMax, and hands them to the multipart parser as they arrive. Nothing binds those numbers to the field that is supposed to be uploading. A request naming a very large maxSize is therefore parsed with no effective ceiling on the total size, and omitting fileMaxSize and fileCountMax leaves the per-part and part-count limits unset as well. The values the application configured through FileUploadToResourceField#setMaxSize(), #setFileMaxSize() and #setFileCountMax() are consulted only when the client omits the corresponding parameter, so against a client that supplies one they have no effect at all.
Parts above the parser's in-memory threshold are spooled to the container's temporary directory, and the file parts are then copied into the folder the application's IUploadsFileManager owns, under a sub-folder the request names, where they remain. A part that is not a file is read into the heap in full while the request is parsed. One request, repeatable, can therefore consume as much disk or as much heap as the client chooses to send. The resource carries no authorization annotation and the default authorization strategy permits every resource request, so unless the application authorizes the resource itself the request needs no authentication, no session, no prior page view and no user interaction.
An application is affected where it uses FileUploadToResourceField, or mounts FileUploadResourceReference itself. This is not the ordinary upload path: the resource is a singleton that has to be created and mounted deliberately. An application that configures no upload limit at all loses nothing, because Wicket applies no total-size limit of its own by default; what the defect removes is a limit the application set. Uploads through Form with FileUploadField, and through AjaxFileDropBehavior, are not affected, because both read their limits from the component rather than from the request. The upload resource does not exist in the 8.x line.
This issue affects Apache Wicket: from 9.14.0 through 9.24.0, from 10.0.0 through 10.9.1. Users are recommended to upgrade to version 9.25.0 or 10.12.0, which fix the issue. |
| A vulnerability was found in WAVLINK WN701AE 260105. Impacted is the function del_vlan_group of the component ioos Web Backend. The manipulation of the argument vlan_name results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| The nsenter --join-cgroup option opens the target cgroup.procs file as root and leaves that file descriptor open across later namespace and credential changes and across execve(). Because the kernel checks later cgroup migrations using the credentials from the original open, a program run in an attacker-controlled target can inherit root's ability to move host processes between cgroups. After a privileged operator uses --join-cgroup against that target, an unprivileged user can migrate and terminate unrelated root processes. |
| A vulnerability was found in WAVLINK WN551X3-A M51X3_V251020-WO-182e965. This impacts the function sub_41a430 of the file /bin/ioos of the component DNS Resolution Handler. Performing a manipulation of the argument data results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe()
In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any
subsequent operation fails or when the module is unloaded, the clock
reference count is never decremented via clk_put(), leading to a
resource leak.
Switch to devm_clk_get() so that the clock is automatically managed
and released. |
| A vulnerability has been found in WAVLINK WN536AX6-A V260507. The impacted element is the function wireguard_cli_group handler of the file /protocol.csp of the component WireGuard. The manipulation of the argument group_id/group_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WN536AX6-A V260507_2.0.0. This issue affects the function sub_41a1d8 of the file /bin/ioos of the component WireGuard CLI Group Handler. Such manipulation of the argument group_name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A weakness has been identified in WAVLINK WN536AX6-A V260507_2.0.0. This vulnerability affects the function sub_416760 of the file /bin/ioos of the component Web Management Interface. This manipulation of the argument group_name causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This issue affects the function sub_416B50 of the file /bin/ioos. The manipulation of the argument file_id leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in WAVLINK WN579X3-D V250402. This affects the function port_forward of the file /cgi-bin/wapi.cgi. The manipulation of the argument Name results in os command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WL-WN579A3-A 2026-03-10-94f93d4. The impacted element is the function set_wzdgwMesh of the file /cgi-bin/adm.cgi of the component Initial Setup Wizard. The manipulation of the argument wlan_ssid leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| A flaw was found in libsoup. The SoupWebsocketConnection may accept a large WebSocket message, which may cause libsoup to allocate memory and lead to a denial of service (DoS). |
| WebDyne versions from 2.031 before 3.022 for Perl execute files with .psp anywhere in the name as Perl pages.
WebDyne decides whether to run a requested file as a page by matching its name against WEBDYNE_PSP_EXT_RE, which has no end anchor.
An application that accepts uploads by checking only the final extension lets a remote attacker upload a file such as report.psp.pdf and run its embedded Perl by requesting it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
