| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject MEM_ALLOC BTF accesses past object bounds
BTF struct walks relax the struct-size check for accesses through a
trailing flexible array. That is valid for ordinary BTF type walking, but
PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static
BTF type size.
When walking a MEM_ALLOC object, reject the access before applying the
flexible-array relaxation if the access range extends past the struct size.
Apply the same policy to struct ID matching so kfunc and kptr type checks
do not walk past the allocated object bounds either. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix response resource leak on queue teardown
When an nvme target with rdma transport is removed while I/Os are in
flight, a response can be posted but its send completion is never
delivered before the connection is torn down. As a result
nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for
the response, and this leaks the allocated RDMA read/write context and
request SGLs.
These leaks are recreated by running blktests nvme/061 with the rdma
transport and the siw driver. Kernel kmemleak feature reports them as
follows:
unreferenced object 0xffff88812bc490c0 (size 32):
comm "kworker/2:1H", pid 409, jiffies 4307744490
backtrace (crc 89afd339):
__kmalloc_noprof+0x5f9/0x890
sgl_alloc_order+0x7b/0x380
nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet]
nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
unreferenced object 0xffff88814bd05e80 (size 64):
comm "kworker/3:1H", pid 148, jiffies 4295195428
backtrace (crc e35510cb):
__kmalloc_noprof+0x5f9/0x890
rdma_rw_ctx_init+0x333/0x1fa0 [ib_core]
nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
To avoid the memory leaks, reclaim the memory of the in-flight responses
when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources()
that frees up the RDMA read/write context and the request SGLs of such
responses. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup
vddInd and vddcInd fields from VBIOS-parsed tables are used to index into
voltage lookup tables without a bounds check. Return -EINVAL when any
index is out of range. |
| In OpenStack Blazar before 17.0.1, the V2 lease listing operation (GET /v2/leases) returns leases for every project without enforcing project scoping or an administrator-only policy. Any authenticated user with access to the Blazar REST API can enumerate leases belonging to other tenants, exposing lease IDs, reservation IDs, resource IDs, and reservation metadata. The exposed lease IDs also enable the object-level authorization bypass tracked in the companion request, allowing an attacker to then modify or delete the enumerated leases. |
| In Vinyl Cache before 9.0,2, workspace buffer overflow vulnerability was found in the .upper() and .lower() string type methods of VCL. This can be used as a remote denial of service (DoS) vector to make the child process segfault or assert, and then restart. Effectively exploiting this vulnerability requires prior knowledge about the VCL in use and the ability to craft a request that contains a string that is long enough to fill the remaining workspace at the call site while staying under the different request size limits (http_req_size, http_req_hdr_len, etc.). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_free_cq()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_free_cq(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the freeing
of the vendor-specific resources ensuring that the CQ is removed from
restrack before its internal resources are released.
This guarantees that no new users hold references to a CQ that is in
the process of destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34
Write of size 4 at addr c5e90480 by task binder/73
imx6q_cpufreq_probe from platform_probe+0x88/0xe4
platform_probe from really_probe+0x108/0x384
bind_store from kernfs_fop_write_iter+0x1b4/0x28c
The write lands one u32 past the end of the allocation.
soc_opp_count is only read a few lines below the loop that fills it, so it
never needed static storage. Make it a local. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear buf on error in __bpf_get_task_stack
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: synchronize heartbeat callbacks with o2net teardown
Patch series "ocfs2: harden heartbeat teardown races".
This series fixes two OCFS2 heartbeat/o2net teardown races found by
KASAN.
This patch (of 2):
Heartbeat callbacks stay registered while configfs local-node teardown
enters o2net_stop_listening(). A node-down event can still run through
o2net_disconnect_node() and o2net_set_nn_state() while teardown is
destroying o2net_wq, so the later queue/flush operations can hit a dead
workqueue. KASAN has caught this as a slab-use-after-free in
__queue_work() with the call chain:
KASAN slab-use-after-free in __queue_work+0x56/0xa90
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__queue_work+0x56/0xa90
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__queue_delayed_work+0x58/0x1e0
queue_delayed_work_on+0xb4/0xc0
o2net_set_nn_state+0x467/0x840
o2net_disconnect_node+0x7b/0xe0
o2net_hb_node_down_cb+0x54/0x60
o2hb_run_event_list+0x236/0x2d0
o2hb_check_slot+0xad4/0xbc0
lock_release+0xc8/0x290
o2hb_check_slot+0x9ea/0xbc0
trace_hardirqs_on+0x18/0x130
o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
__lock_acquire+0x466/0x2260
lockdep_hardirqs_on_prepare+0xea/0x1a0
ktime_get_with_offset+0xe9/0x230
o2hb_thread+0x14e/0x770
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
__switch_to+0x2e9/0x730
ret_from_fork_asm+0x1a/0x30
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x292/0x760
__alloc_workqueue+0x736/0xc60
alloc_workqueue_noprof+0xb1/0x110
o2net_start_listening+0xe5/0x430
o2nm_node_local_store+0x184/0x310
configfs_write_iter+0x18a/0x210
vfs_write+0x469/0x810
ksys_write+0xd2/0x170
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
rcu_core+0x4f4/0x1320
handle_softirqs+0x156/0x660
queue_delayed_work_on
o2net_set_nn_state
o2net_disconnect_node
o2net_hb_node_down_cb
o2hb_run_event_list
Keep heartbeat callbacks registered so quorum state still tracks node
state, but stop them from driving o2net reconnect/disconnect work once
local teardown starts. Mark the transport offline before destroying
o2net_wq, wait for any in-flight heartbeat callback to finish, and delay
bring-up replay until the new local node is published through
o2nm_this_node().
The replay also has to stay serialized with heartbeat callback delivery.
Otherwise a live-node snapshot can be copied, a real hb_down callback
can install -ENOTCONN for a peer, and the stale replay can call
o2net_hb_node_up() for that same peer and queue reconnect work even
though heartbeat is already down.
The buggy scenario involves two paths, with each column showing the order
within that path:
local-node teardown: heartbeat node-down callback:
1. configfs local-off enters 1. o2hb_run_event_list() invokes
o2net_stop_listening(). o2net_hb_node_down_cb().
2. teardown heads for 2. the callback reaches
destroy_workqueue(o2net_wq). o2net_disconnect_node() and
o2net_set_nn_state().
3. teardown destroys and NULLs 3. the callback flushes or queues
o2net_wq. work through o2net_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: coreboot: Validate table bounds
The existing coreboot_table_populate() bounds checks limit individual
entries to the mapped length. However, coreboot_table_probe() replaces
the platform resource length with header and table sizes supplied by
firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an
extent beyond the resource, causing the driver to map and parse memory
outside the resource. A resource shorter than the fixed header is also
mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the
signature, require a complete header, calculate the advertised extent
with overflow checking, and reject extents beyond the resource before
remapping the table. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry
Commit e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync
with tracer updates") attempted to resolve a long-standing issue with
syscall entry tracing, where a tracer is able to manipulate the first
syscall argument without being subjected to seccomp or audit checking.
Unfortunately, that fix was incomplete [1], as it failed to update
'orig_x0' between a tracer updating x0 during a seccomp ptrace exit
(SECCOMP_RET_TRACE) and the seccomp filter being re-evaluated.
Rather than add hooks to the core seccomp code, instead move the
synchronisation code into the ptrace GPR and syscall setting code so
that 'orig_x0' is kept up to date with x0 whenever we're stopped on the
syscall entry path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix double completion race in nci_data_exchange_complete
nci_close_device() and nci_rx_work can both call
nci_data_exchange_complete() concurrently. After commit 4527025d440ce8
("nfc: nci: fix circular locking dependency in nci_close_device") moved
flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock),
rx_work is no longer serialized with the explicit completion call in the
close path. Both callers read the non-NULL callback pointer and invoke
rawsock_data_exchange_complete(), which calls sock_put() -- but only one
sock_hold() was taken, so the second sock_put() underflows the refcount
and frees the socket while it is still in use.
Replace the bare clear_bit(NCI_DATA_EXCHANGE) with
test_and_clear_bit() so that only the first caller proceeds to invoke
the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: Don't support cross-netns setup.
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP
Problem:
MCU command timeout while the firmware state is normal, and the
firmware keeps showing the error log "ERROR!! NO PAUSE...".
Root cause:
If the MLD_ID field in the TXD is neither the primary link id nor the
secondary link id, it may lead to a firmware busy loop when the third
link is in power saving mode.
Remap frames directed to a third link to the primary link wcid. Since
TX status events and txfree completions carry the wcid the firmware
saw, use the remapped wcid for packet id tracking and non-AQL packet
accounting as well, while the frame keeps its original link context
for addressing, band and OMAC selection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx()
When performing channel switches on different radios within a short
timeframe, channel contexts with different bands can be carried for
each struct ieee80211_vif_chanctx_switch.
Rework mt76_switch_vif_chanctx() to properly handle this scenario. |
