| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory leak in ProFTPd 1.2.0rc2 allows remote attackers to cause a denial of service via a series of USER commands, and possibly SIZE commands if the server has been improperly installed. |
| Multiple memory leaks in isakmpd in OpenBSD 3.4 and earlier allow remote attackers to cause a denial of service (memory exhaustion) via certain ISAKMP packets, as demonstrated by the Striker ISAKMP Protocol Test Suite. |
| Memory leak in NNTP service in Windows NT 4.0 and Windows 2000 allows remote attackers to cause a denial of service (memory exhaustion) via a large number of malformed posts. |
| The audit system in Linux kernel 2.6.6, and other versions before 2.6.13.4, when CONFIG_AUDITSYSCALL is enabled, uses an incorrect function to free names_cache memory, which prevents the memory from being tracked by AUDITSYSCALL code and leads to a memory leak that allows attackers to cause a denial of service (memory consumption). |
| Memory leak in the request_key_auth_destroy function in request_key_auth in Linux kernel 2.6.10 up to 2.6.13 allows local users to cause a denial of service (memory consumption) via a large number of authorization token keys. |
| The do_fork function in Linux 2.4.x before 2.4.26, and 2.6.x before 2.6.6, does not properly decrement the mm_count counter when an error occurs after the mm_struct for a child process has been activated, which triggers a memory leak that allows local users to cause a denial of service (memory exhaustion) via the clone (CLONE_VM) system call. |
| Memory leak in FreeBSD 4.5 and earlier allows remote attackers to cause a denial of service (memory exhaustion) via ICMP echo packets that trigger a bug in ip_output() in which the reference count for a routing table entry is not decremented, which prevents the entry from being removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| Multiple denial-of-service vulnerabilities exist in the affected product. These issues can be triggered through various crafted inputs, including malformed Class 3 messages, memory leak conditions, and other resource exhaustion scenarios. Exploitation may cause the device to become unresponsive and, in some cases, result in a major nonrecoverable fault. Recovery may require a restart. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| On affected platforms running Arista EOS with SNMP configured, if “snmp-server transmit max-size” is configured, under some circumstances a specially crafted packet can cause the snmpd process to leak memory. This may result in the snmpd process being terminated (causing SNMP requests to time out until snmpd is restarted) and memory pressure for other processes on the switch. Increased memory pressure can cause processes other than snmpd to be at risk for unexpected termination as well. |
| Nanopb is a small code-size Protocol Buffers implementation. When the compile time option PB_ENABLE_MALLOC is enabled, the message contains at least one field with FT_POINTER field type, custom stream callback is used with unknown stream length. and the pb_decode_ex() function is used with flag PB_DECODE_DELIMITED, then the pb_decode_ex() function does not automatically call pb_release(), like is done for other failure cases. This could lead to memory leak and potential denial-of-service. This vulnerability is fixed in 0.4.9.1. |
| A vulnerability classified as problematic has been found in FFmpeg up to 6e26f57f672b05e7b8b052007a83aef99dc81ccb. This affects the function audio_element_obu of the file libavformat/iamf_parse.c of the component IAMF File Handler. The manipulation of the argument num_parameters leads to memory leak. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 0526535cd58444dd264e810b2f3348b4d96cff3b. It is recommended to apply a patch to fix this issue. |
| On affected platforms running Arista EOS with BGP Link State configured, BGP peer flap can cause the BGP agent to leak memory. This may result in BGP routing processing being terminated and route flapping. |
| A vulnerability, which was classified as problematic, was found in TechPowerUp GPU-Z 2.23.0. Affected is the function sub_140001880 in the library GPU-Z.sys of the component 0x8000645C IOCTL Handler. The manipulation leads to memory leak. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| go-crypto-winnative Go crypto backend for Windows using Cryptography API: Next Generation (CNG). Prior to commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41, calls to `cng.TLS1PRF` don't release the key handle, producing a small memory leak every time. Commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41 contains a fix for the issue. The fix is included in versions 1.23.6-2 and 1.22.12-2 of the Microsoft build of go, as well as in the pseudoversion 0.0.0-20250211154640-f49c8e1379ea of the `github.com/microsoft/go-crypto-winnative` Go package. |
| Redis through 8.0.3 allows memory consumption via a multi-bulk command composed of many bulks, sent by an authenticated user. This occurs because the server allocates memory for the command arguments of every bulk, even when the command is skipped because of insufficient permissions. NOTE: this is disputed by the Supplier because abuse of the commands network protocol is not a violation of the Redis Security Model. |
