| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol()
If during relocation we fail in insert_dirty_subvol() because
btrfs_update_reloc_root() returned an error, we will leave a root's
reloc_root field pointing to a reloc root that was freed instead of NULL,
resulting later in a use-after-free, or double free attempt during
unmount.
The sequence of steps is this:
1) During relocation the call to btrfs_update_reloc_root() in
insert_dirty_subvol() fails, so insert_dirty_subvol() returns the
error to merge_reloc_root() without adding the root to the list
rc->dirty_subvol_roots;
2) Then merge_reloc_root() aborts the current transaction because
insert_dirty_subvol() returned an error;
3) Up the call chain, merge_reloc_roots() gets the error, adds the
reloc root for root X to the local reloc_roots list and jumps to the
'out' label, where it calls free_reloc_roots() to free all the reloc
roots in the local reloc_roots list. This frees the reloc root for
root X;
4) We go up the call chain to relocate_block_group() which calls
clean_dirty_subvols() to go over dirty roots and set their
->reloc_root field to NULL, but root X is not in the dirty_subvol_roots
list, so its ->reloc_root still points to a reloc root;
5) Relocation finishes, with an error and a transaction abort, but the
->reloc_root field for root X still points to the reloc root that was
freed in step 3;
6) When unmounting the fs we end up calling:
btrfs_free_fs_roots()
btrfs_drop_and_free_fs_root()
--> calls btrfs_put_root() against root X's ->reloc_root
which is not NULL and points to the already freed
reloc root in step 4 above
Resulting in a use-after-free to a double free attempt.
Syzbot reported this with the following dmesg/syslog:
[ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5)
[ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure
[ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5
[ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction.
[ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
[ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure
[ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly
[ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure
[ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1
[ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30
[ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30
[ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409
[ 106.682946][ T5338] ==================================================================
[ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250
[ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338
[ 106.693173][ T5338]
[ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
[ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 106.694300][ T5338] Call Trace:
[ 106.694308][ T5338] <TASK>
[ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150
[ 106.694331][ T5338] print_address_description+0x55/0x1e0
[ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250
[ 106.694358][ T5338] print_report+0x58/0x70
[ 106.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: validate idmap key payload length
The cifs.idmap key type stores its payload length in key->datalen, which
is limited to U16_MAX. Accepting a larger key payload truncates the
recorded length and can make later users interpret the payload using
inconsistent bounds.
Reject oversized preparsed payloads before allocating or copying them.
This keeps key->datalen consistent with the stored data for both inline
and separately allocated idmap payloads. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: embed f2fs_gc_kthread in f2fs_sb_info
Instead of allocating f2fs_gc_kthread dynamically, embed it in
f2fs_sb_info. This simplifies lifetime management and prepares for
fixing race conditions during teardown.
- __sbi_store - remount|shutdown
- f2fs_stop_gc_thread
- access sbi->gc_thread
- sbi->gc_thread = NULL
- access sbi->gc_thread->f2fs_gc_task |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, Termix derives the keys that wrap OIDC and WebAuthn users' Data Encryption Keys from committed default strings and the public userId salt in src/backend/utils/user-crypto.ts. Because OIDC_SYSTEM_SECRET and WEBAUTHN_SYSTEM_SECRET are not configured by the project's default deployment artifacts, an attacker with an offline SQLite database copy can derive the wrapping key, recover each affected user's DEK, and decrypt stored SSH passwords, private keys, and key passphrases. Password-authenticated users are not affected by this specific key derivation path. This issue is fixed in version 2.5.1. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 2.4.1 until 2.5.1, an authenticated Termix administrator can store attacker-controlled domain and email values through PATCH /users/acme-ssl-settings and trigger their interpolation into a certbot shell command through POST /users/acme-ssl-request. In src/backend/database/routes/acme-ssl-routes.ts, child_process.execSync invokes /bin/sh -c with those values only wrapped in double quotes, so shell metacharacters can execute arbitrary operating-system commands as the Termix backend process. Both HTTP webroot and DNS Cloudflare challenge modes are affected, and compromise exposes Termix databases, process secrets, stored credentials, and network reachability. This issue is fixed in version 2.5.1. |
| A protection mechanism failure in the object-document mapper's encryption configuration generation can cause fields that an application declared for client-side field-level encryption to be written and kept in cleartext, without any error or warning. A party holding ordinary read access to the database can then read values that were intended to be protected from that party. This may result in unintended disclosure of sensitive information. |
| Mongoid may omit encryption rules for fields declared on embedded models when generating the client-side field-level encryption schema. Applications that enable this feature can therefore store values intended to be encrypted in readable form, with no error or warning. A party with routine read access to the database, a backup, or the underlying data files may then see data that was meant to remain unreadable outside the application. |
| ZBar commit 2ea2ca58 contains an undefined-behavior vulnerability in the Code 128 decode6() function. When processing specially crafted Code 128 input, decode_e() can return -1 for an invalid edge pattern, and decode6() subsequently left-shifts this negative signed value while constructing the edge signature. The operation invokes undefined behavior and can terminate trap-mode UBSan builds with SIGILL, resulting in denial of service. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, the POST /credentials/:id/deploy-to-host endpoint resolves credential and target-host records from attacker-controlled credentialId and targetHostId integer values without checking that either record belongs to the requesting user. In src/backend/database/routes/credentials.ts, differential errors reveal whether credential and host records exist and disclose each record's authType value. Properly encrypted passwords and keys are not disclosed, but a key-authenticated victim host can receive an outbound SSH connection attempt using the attacker's public key. This issue is fixed in version 2.5.1. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, the Termix SSH key deployment flow derives a grep pattern from a user-controlled public-key token and interpolates it into double-quoted shell commands executed on the selected target host. In src/backend/database/routes/credential-deploy-routes.ts, both grep -F verification paths accept command substitution or quote-breaking shell syntax in keyPattern. An authenticated user who can deploy a crafted SSH credential can therefore execute commands with the selected remote account's privileges. The separate ACME command-injection report is outside this CVE's scope. This issue is fixed in version 2.5.1. |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by a log injection vulnerability through crafted LTPA token cookies. |
| libconfini 1.16.4 contains a heap out-of-bounds write condition involving the bundled load_ini_buffer.h utility and strip_ini_cache(). The bundled utility allocates exactly ini_length bytes, while strip_ini_cache() unconditionally writes a NUL terminator at ini_source[ini_length], requiring an additional writable byte. Applications using the bundled allocation pattern can trigger deterministic heap memory corruption when processing any non-empty INI input, resulting in denial of service. |
| Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1225. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0530. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0389. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0322. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix device_register() error path
When device_register() fails in i3c_master_register_new_i3c_devs(),
put_device() is called to drop the reference taken by
device_register(). That drops the last reference, so the device's
release callback i3c_device_release() runs and frees the i3c_device.
Two problems follow from that:
i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because
desc->dev->desc still points back at the descriptor. Clear it before
calling put_device().
After put_device() frees the i3c_device, desc->dev is left pointing at
freed memory, so clear desc->dev as well. That prevents, for example,
i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix HE extended capability length check
rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability
byte 10, but rejects only datalen values below 10. Byte 10 requires at
least 11 bytes.
Require datalen >= 11 before reading data[10]. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash. |
