| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: cap decoded POSIX ACL count to bound sort cost
nfsd4_decode_posixacl() reads a u32 entry count off the wire and passes
it straight to posix_acl_alloc() and sort_pacl_range(). The latter is
an O(n^2) bubble sort, so a client-chosen count drives unbounded CPU in
the server's compound processing path.
nfsd4_decode_posixacl()
xdr_stream_decode_u32(&count) /* uncapped u32 */
posix_acl_alloc(count, GFP_KERNEL)
sort_pacl_range(*acl, 0, count - 1) /* O(n^2) bubble sort */
The encoder side in the same file already rejects ACLs whose a_count
exceeds NFS_ACL_MAX_ENTRIES, but the decoder introduced in commit
5fc51dfc2eb1 ("NFSD: Add support for XDR decoding POSIX draft ACLs")
omitted the symmetric check.
Fix by rejecting a wire count greater than NFS_ACL_MAX_ENTRIES with
nfserr_inval, before any allocation, so the sort is bounded by
NFS_ACL_MAX_ENTRIES^2 comparisons.
While we're in here, also fix the nfserr_resource return if
posix_acl_alloc() fails. That's not a legal error code for v4.1+. Change
it to return nfserr_jukebox as that's more appropriate for memory
allocation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers
from an MDS create-with-delegation reply. For each set it reads a 64-bit
start and a 64-bit len with ceph_decode_64_safe(), which only validates
that the eight bytes are present in the message, not the value, and then
loops over len while inserting entries into s_delegated_inos.
len is fully attacker controlled. A malicious or compromised MDS can send
one huge interval, many intervals in one reply, duplicate intervals, or
repeated replies that accumulate delegated inodes on the same session.
The original code bounded none of these and could spin the insert loop or
grow the xarray without limit.
Bound both dimensions with a single enforcement point. Track the number
of delegated inodes held by each MDS session in an atomic counter and
grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless()
to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper
is the only place the counter grows, the per-session population can never
exceed the cap, so no separate per-session pre-check is needed. The
counter is decremented when async create consumes a delegated inode or
when an insert fails, incremented when a delegated inode is restored,
initialized with the session xarray, and reset when reconnect destroys
the xarray.
A per-session cap alone still lets one reply spin the insert loop on
duplicate ranges without growing the counter, so also cap the aggregate
interval length accepted from a single reply. Together these bound both
the loop trip count per reply and the xarray population across replies.
The cap is a fixed, client-chosen constant rather than a value derived
from the MDS. mds_client_prealloc_inos is a userspace MDS configuration
option; it is never sent to the kernel client on the wire, and a
server-supplied bound could not be trusted for a defensive limit in any
case. The constant is set well above that option's documented default of
1000 (a generous multiple), so legitimate refill behavior is unaffected
while the CPU and xarray memory a malformed delegation stream can consume
stays bounded.
Impact: a malicious or compromised Ceph MDS can no longer make a client
spin through an unbounded delegated-inode interval or grow one session's
delegated-inode xarray without limit. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH,
whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag.
The HW therefore matches only a 20-bit Stream ID.
The bound check rejects only virt_sid > UINT_MAX, which admits a value far
wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit
above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match
on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id
is guest-controlled, a VMM can trigger it.
Validate virt_sid against the field width with FIELD_MAX(), and program the
register with FIELD_PREP() so the value and the field stay consistent. |
| Concrete CMS versions 9.5.0 through 9.5.2 are vulnerable to Open Redirect via the rcURL parameter. An attacker can craft a single link on the site's own domain that sends a user to an arbitrary external site immediately after authentication, facilitating phishing and credential theft. The same handling is present in the registration flow, giving a second entry point on sites with registration enabled. Concrete CMS versions prior to 9.5.0 do not include the rcURL parameter or this allowlist and are not affected. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.3 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Michal M. for reporting. |
| The Masteriyo LMS WordPress plugin before 3.4.1 does not verify ownership of, or restrict the type of, the records a user requests for download, allowing users with the instructor role to retrieve the full content and metadata of arbitrary posts, including other instructors' private and draft courses. |
| Contributor Insecure Direct Object References (IDOR) in Starter Templates <= 4.7.5 versions. |
| The Rox Appointment Booking WordPress plugin before 1.2.3 does not perform any authorization check on the endpoint that returns a booking's confirmation details, and each booking is addressed by a sequential numeric identifier, allowing unauthenticated attackers to read any customer's name, email, phone, booking details and payment status by enumerating that identifier. |
| The Booking for Appointments and Events Calendar WordPress plugin before 2.4.10 does not verify that the user editing a customer or employee record is entitled to modify the WordPress account linked to it, allowing users holding Amelia's customer or employee management permissions to set the password and email address of other users' WordPress accounts and take them over. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. |
| The BEAR WordPress plugin before 1.2.2 does not perform ownership checks on several handlers that return product data by a user-supplied identifier, allowing users who are restricted to their own products to read other owners' product information, including protected downloadable file URLs and private product metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: validate deflate params
We must validate user-supplied deflate winbits before we pass it to
zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is
outside of valid ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID
vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight
to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen"
condition with WARN_ON_ONCE().
The guest can make it happen at will, though: for any INTID outside of
the implemented SGI, PPI and SPI ranges the lookup returns NULL, since
GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID
to GICV_DIR triggers the WARN, and panics hosts running with
panic_on_warn.
Drop the WARN and ignore failed lookups. |
| Authorization bypass through user-controlled key in Visual Studio Code allows an unauthorized attacker to bypass a security feature over a network. |
| Not failing securely ('failing open') in Visual Studio Code allows an unauthorized attacker to bypass a security feature over a network. |
| Incomplete comparison with missing factors in Visual Studio Code allows an unauthorized attacker to bypass a security feature over a network. |
| In WriteImageToDisk of runtime_image.cc, there is a possible file tampering due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A security vulnerability has been detected in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. This affects the function updateOrderSta1/updateOrderdiseaseInfo of the file ssm_pro/src/main/java/cn/sfturing/web/OrderController.java of the component Order Handler. The manipulation of the argument userID/id leads to authorization bypass. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in diem-project diem up to 5.1.3. This vulnerability affects unknown code of the file dmFrontPlugin/modules/dmWidget/lib/BasedmWidgetActions.class.php of the component dmWidget. Such manipulation of the argument widget_id leads to authorization bypass. The attack may be launched remotely. The exploit is publicly available and might be used. The name of the patch is 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. A patch should be applied to remediate this issue. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in jofpin trape 2.0. This affects an unknown part of the file core/user.py. This manipulation of the argument vId/id causes authorization bypass. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. Affected by this issue is the function AuthController::_initialize of the file App/Admin/Controller/ChapterController.class.php of the component Chapter Controller. The manipulation leads to authorization bypass. The attack can be initiated remotely. The exploit is publicly available and might be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
