| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hvs/v3d: Fix null dereference in unbind
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().
skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.
KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:
BUG: KMSAN: kernel-infoleak in _copy_to_iter
_copy_to_iter
__skb_datagram_iter
skb_copy_datagram_iter
netlink_recvmsg
sock_recvmsg
__sys_recvfrom
Uninit was created at:
kmem_cache_alloc_node_noprof
__alloc_skb
net_dm_packet_work
Bytes 173-175 of 176 are uninitialized
Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: perform u64_stats updates under IRQ-disabled section
In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(),
u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were
called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local
IRQs had already been re-enabled.
Tracepoint probes can execute in IRQ or softirq context. On 32-bit
architectures, u64_stats_update_begin() disables preemption but not interrupts,
relying on seqcount writes. If a nested interrupt occurs on the same CPU during
the 64-bit stats update, the reentrant seqcount update can corrupt the
seqcount state or stats value.
Fix this by performing the 64-bit per-CPU stats update before releasing
drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain
disabled during the u64_stats update. |
| A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec. |
| Type confusion in V8 in Google Chrome prior to 153.0.8010.52 allowed a remote attacker leveraging social engineering to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read in DataTransfer in Google Chrome prior to 153.0.8010.52 allowed a local attacker leveraging social engineering to read memory outside the sandbox via a local program. (Chromium security severity: Medium) |
| A vulnerability in the web-based management interface of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to inject arbitrary operating system commands.
This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by saving configuration details that contain malicious values. A successful exploit could allow the attacker to execute arbitrary operating system commands with root privileges. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Missing authorization in Storage in Google Chrome prior to 153.0.8010.52 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted PDF file. (Chromium security severity: Medium) |
| MISP's galaxy matrix statistics view (app/View/Users/statistics_galaxymatrix.ctp) renders the galaxy name directly into HTML output via sprintf() without any HTML encoding. An authenticated user holding the perm_galaxy_editor permission can create or modify a galaxy whose name contains arbitrary HTML or JavaScript markup. Because the value is interpolated verbatim into the page, any user who subsequently opens the galaxy matrix statistics page will have the embedded script executed in their browser context. This enables session hijacking, credential theft, data exfiltration, or the performance of arbitrary actions on behalf of the victim within the MISP application.
Version affected: <2.5.47 |
| Red Hat Product Security has come to the conclusion that this CVE is not needed. |
| A flaw was found in multicluster-global-hub. During a ManagedClusterMigration, the system incorrectly grants all managed hubs read access to a shared communication topic. This allows a compromised managed hub to intercept and collect sensitive bootstrap kubeconfigs, which contain API server tokens intended for other hubs. These tokens have an extended validity of approximately 9.86 years, significantly increasing the risk of unauthorized access and information disclosure to other managed clusters. |
| A vulnerability was found in ST Engineering iDirect Evolution and Velocity WebServer Evolution up to 20260717. This affects an unknown part of the file /login.html of the component Management Service. Performing a manipulation of the argument Host results in open redirect. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| Memory Corruption via Uncanceled AIO Requests on Error: libkcapi's one-shot AIO path can return an error before all submitted IOCBs are drained, allowing later kernel writes into caller-owned output buffers. |
| A flaw was found in libkcapi. When performing one-shot symmetric cipher operations on large inputs (over 64 KiB) in stateful modes such as Counter (CTR) or Cipher Block Chaining (CBC), the library improperly reuses the Initialization Vector (IV) for each internal data chunk. A remote attacker could potentially exploit this by making an application that uses libkcapi process specially crafted large inputs. This can lead to a significant weakening of data confidentiality, as the repeated IV use can expose relationships in encrypted plaintext, and may also affect data integrity by causing incorrect cryptographic processing. |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
