| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix ALIGN() overflow in symlink_data() error context loop
The check added by commit 7d9a7f1f96cd ("smb/client: fix possible
infinite loop and oob read in symlink_data()") compared the post-ALIGN
length against the remaining buffer, but ALIGN() itself can overflow:
for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8)
wraps to 0, so the subsequent bounds check passes, and the loop
advances by zero bytes leaving 'p' pointing into stale data.
Fix by checking the raw ErrorDataLength against the remaining space
before applying ALIGN(), then checking again after. Since raw_len is
bounded by the buffer, raw_len + 7 cannot overflow, so the second check
is an exact post-alignment bounds guard. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: validate report size in mcp2221_raw_event()
mcp2221_raw_event() never validates the size of incoming HID reports.
In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3]
as the copy length without checking that 4 + data[3] bytes actually
exist in the received report. A malicious or misbehaving USB device can
send a short report with a large data[3], causing the memcpy to read
past the valid report data in the HID transfer buffer and leak
uninitialized kernel memory back to userspace through the I2C/SMBus
read path.
Add a minimum size check at entry and validate that the source range
fits within the received report before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix off-by-one when saving/restoring non-PCI config space
nv_suspend() and nv_resume() walk the non-PCI configuration space with
for (i = 0; i <= np->register_size/sizeof(u32); i++)
which runs one iteration too many. saved_config_space is declared as
u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3
device register_size/sizeof(u32) is exactly the array length and the last
iteration addresses one element past the end.
The element it lands on is np->name_rx[0..3]: saved_config_space[] is
followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no
padding. Nothing observable is corrupted by that, because nv_request_irq()
rewrites name_rx with sprintf() before it is ever passed to request_irq().
The bug is the out-of-bounds access itself, which UBSAN reports and which
CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code,
plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one
dword past the range the driver mapped:
np->base = ioremap(addr, np->register_size);
VER1 and VER2 devices stay inside the array, but they too get the stray
read and the stray write one dword past their own window.
Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle.
The splat below is trimmed: the build path in the file name, the CPU
and taint lines, the Workqueue line, the "?" hint frames, and the
frames below device_suspend are all cut. The kernel was tainted, with
an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the
stock module.
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25
index 385 is out of range for type 'u32 [385]'
Call Trace:
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x54/0x59
__this_module+0xe398c/0xe9010 [forcedeth]
pci_pm_suspend+0x80/0x170
dpm_run_callback+0x51/0x160
device_suspend+0x1a2/0x4a0
...
Both loops are hit. UBSAN reports each source location only once per module
load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does
test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the
two splats land in the first S3 cycle after the module is loaded and later
cycles are silent even though the access still runs off the end every time.
In that first cycle line 6225 is reported from pci_pm_suspend and line 6240
from pci_pm_resume.
The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f
("forcedeth: fix buffer overflow") in 2012; these two loops were missed.
The suspend and resume side was reported on LKML in September 2013 by Marc
Weber, with the same analysis and the same one-character fix, but the patch
was attached rather than sent inline and the thread ended there.
Use < instead of <=, which saves and restores exactly register_size bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru_update_cap_info is stack-allocated in pfru_ioctl().
Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports
are generated when a DSM returns 64-byte buffers, with writes reaching
44 bytes past the end of cap_hdr's [64, 156) frame window into
adjacent stack redzones.
Introduce a helper pointer to out_obj->package.elements and use it
to validate each buffer length against its destination field size
before copying, returning -EINVAL if the firmware supplies an
oversized buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix OOB read in eir_get_service_data()
eir_get_service_data() walks the advertising data for a Service Data
field with a matching UUID. On a mismatch it advances:
eir += dlen;
eir_len -= dlen;
eir_get_data() reports dlen as the field's data length, but the field
spans dlen + 2 bytes once its length and type bytes count, and more
when non-Service-Data fields were skipped to reach it. The pointer
lands correctly on the next field. eir_len does not, and the shortfall
compounds across fields until eir_get_data() reads the length and type
bytes of a "field" past the end of the buffer.
For an ISO broadcast sink that buffer is hcon->le_per_adv_data[], filled
from the periodic advertising reports of a remote broadcaster. A PA
payload packed with mismatching Service Data fields walks off the array
into the rest of struct hci_conn. A drifted field that matches the BAA
UUID puts those bytes in iso_pi(sk)->base, where user space reads them
back with getsockopt(BT_ISO_BASE).
Recompute eir_len from the end of the buffer each iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation
Whiteout objects are used in the upper layer of an OverlayFS to
indicate that the file with this name does not exist in the unified
view, even if it is present in one of the lower layer file systems.
For the userspace implementations of OverlayFS (fuse-overlayfs),
whiteout objects can be created from userspace as well:
* mknod(2) with S_IFCHR and makedev(0, 0)
* renameat2(2) with RENAME_WHITEOUT,
creating the whiteout in the old place of the moved file.
This commit guards whiteout creation in both of these cases with
LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered
character devices and are not bound to a driver.
LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a
whiteout object: creating one is the only S_IFCHR creation that the VFS
exempts from CAP_MKNOD, so it is as unprivileged as creating a regular
file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and
LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that
expose a kernel interface [1].
For the mknod(2) case, introduce a Landlock erratum. The creation of
whiteout objects through mknod(2) was previously guarded using
LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using
LANDLOCK_ACCESS_FS_MAKE_REG.
For the renameat2(2) case, fix a bug: Before this commit, renameat2(2)
with RENAME_WHITEOUT would create a directory entry even when all
LANDLOCK_ACCESS_FS_MAKE_* rights were denied.
This does not affect normal renames within layered OverlayFS mounts:
When doing a regular rename() on a mounted fuse-overlayfs, it is the
fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT,
and only the Landlock domain of that daemon is checked there.
Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Depends-on: fe72ce6710cb ("landlock: Add errata documentation section")
[mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and
add link(2) to the user doc] |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: harden gss_krb5_unwrap_v2 against short tokens
gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and
ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN
(16) bytes long, and its rotate_left() helper passes buf->len - base
to xdr_buf_subsegment() without verifying that base <= buf->len. When
a caller hands in a sub-16-byte token, or a token whose declared len
leaves base past the end of the buffer, three distinct failures follow:
gss_krb5_unwrap_v2(offset, len, buf)
ptr = buf->head[0].iov_base + offset
ec = *(ptr + 4) /* OOB read on short head */
rrc = *(ptr + 6) /* OOB read on short head */
rotate_left(offset + 16, buf, rrc)
xdr_buf_subsegment(buf, &subbuf,
base, buf->len - base) /* u32 wrap when base > len */
_rotate_left(&subbuf, shift)
shift %= buf->len /* divide-by-zero when base == len */
After decryption, the cleanup arithmetic has the same shape:
movelen = min_t(unsigned int, buf->head[0].iov_len, len);
movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip;
BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
buf->head[0].iov_len);
The BUG_ON re-adds the value just subtracted, so it reduces to
min(A, B) > A and is permanently false; it cannot catch the unsigned
underflow of movelen, which then drives a ~UINT_MAX-byte memmove().
Add four defense-in-depth guards inside the unwrap core so it is safe
regardless of what its callers validate:
- reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before
touching ptr+4/ptr+6;
- bail from rotate_left() when buf->len <= base, covering both the
underflow and zero-length cases;
- return early from _rotate_left() when buf->len is zero, so the
shift %= buf->len modulo cannot fault;
- replace the dead BUG_ON with a live check that returns
GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: harden gss_unwrap_resp_priv length checks
gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with
offset = (u8 *)(p) - (u8 *)head->iov_base;
if (offset + opaque_len > rcv_buf->len)
goto unwrap_failed;
maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset,
offset + opaque_len, rcv_buf);
Both operands are u32 and the sum is computed in u32. A reply with
opaque_len near 0xffffffff makes offset + opaque_len wrap to a small
value that is below rcv_buf->len, so the bound check passes and
gss_unwrap() is called with end < begin. The check also lacks a
lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is
accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt
header reads at ptr+4 and ptr+6 then run past the token.
A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive
the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the
rotate_left() loop that follows.
Fix by replacing the single combined check with three guards that
are safe in u32 arithmetic and that enforce the RFC 4121 minimum
outer token length:
if (offset > rcv_buf->len)
goto unwrap_failed;
if (opaque_len > rcv_buf->len - offset)
goto unwrap_failed;
if (opaque_len < GSS_KRB5_TOK_HDR_LEN)
goto unwrap_failed;
The first guard makes the subtraction in the second guard
unconditionally safe; offset is derived from a successful
xdr_inline_decode() in the head kvec, so in practice it already
satisfies the bound. The floor mirrors the server-side check added
in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token
minimum length"). |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix pcl_for_each_segment for empty chunks
When a parsed chunk list contains a chunk whose ch_segcount is zero,
pcl_for_each_segment computes its inclusive upper bound as
&chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the
subtraction wraps to 0xFFFFFFFF and the bound lands far past the
ch_segments flex array. The loop body then walks unrelated memory at
sizeof(struct svc_rdma_segment) stride until it faults.
A zero-segcount chunk is reachable from the wire:
xdr_check_write_chunk() only rejects segcount values greater than
rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk
onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs,
so a Write or Reply chunk advertising zero segments leaves
ch_segcount == 0 on the list. When the transport has negotiated
Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four
PCLs with pcl_for_each_segment and dereferences segment->rs_handle
on each iteration, turning the underflow into an out-of-bounds read
and a general protection fault.
xdr_check_write_list / xdr_check_reply_chunk
pcl_alloc_write()
chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */
list_add_tail(&chunk->ch_list, &pcl->cl_chunks)
/* fill loop iterates zero times for wire segcount 0 */
svc_rdma_get_inv_rkey()
pcl_for_each_chunk(rc_write_pcl)
pcl_for_each_segment(segment, chunk)
pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */
segment->rs_handle /* OOB read -> GPF */
Fix by switching the macro to a half-open upper bound that uses
ch_segcount directly. For ch_segcount == 0 the loop start equals the
loop end and the body is skipped; for ch_segcount > 0 the iteration
range is unchanged. All six existing call sites in
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and
net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound,
so no caller changes are needed. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject VAT indexes equal to the entry count
UDF 1.50 virtual partition mapping uses the VAT as an array of physical
block mappings. s_num_entries stores the number of entries in that array,
not the highest valid index. The valid VAT indexes are therefore below
s_num_entries.
udf_get_pblock_virt15() currently rejects only indexes greater than
s_num_entries. A crafted image can request index s_num_entries, pass the
bounds check, and make the kernel read one entry past the allocated VAT table.
Change the check to reject block >= s_num_entries, so the count is handled as
an exclusive upper bound.
A crafted UDF image reproduced this on origin/master commit
0e35b9b6ec0ffcc5e23cbdec09f5c622ad532b53 with a KASAN slab-out-of-bounds
report in udf_get_pblock_virt15().
Trail of Bits has a reproducer that triggers kernel panic demonstrating the bug, and can share it if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from
assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower
bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx()
bounds the declared lengths from above (their sum must fit the received
event), but an assoc request/response shorter than its fixed offset still
underflows here: the u8 wraps to ~250, and cfg80211_connect_result() /
cfg80211_roamed() then treat that wrapped value as the IE length and copy
that many bytes out of the small assoc_info buffer to user space via
nl80211, disclosing adjacent slab memory.
Clamp both lengths to their offsets before subtracting.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing lower bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by sscanf(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lockres_handler() passes mres->lockname_len unchecked to
dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname
slab object: a heap out-of-bounds write of up to ~223 bytes.
- the same handler trusts mres->num_locks without checking that the
message is large enough to hold that many entries, so
dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len)
copy and trips a BUG_ON (an out-of-bounds read ending in a panic).
The other o2dlm receive handlers already reject an oversized name; the
migration and recovery handlers have omitted it since the DLM was added
(see the Fixes tags). Patch 1 bounds namelen; patch 2 validates
lockname_len, num_locks, and the payload size. Conforming recovery and
migration traffic is unaffected.
o2net authenticates peers only by the DLM domain key, so any node that has
joined the domain -- including a compromised or malicious member -- can
send these messages. There is no local trigger; the attacker must already
be a member of the cluster.
Each sink was confirmed under KASAN with an out-of-tree module mirroring
it exactly -- a kmem_cache/kmalloc of the real destination size, then the
same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes,
Read for the recovery walk, and a panic. A userspace AddressSanitizer
build faults identically under -m32 and -m64. Scrubbed logs are available
on request.
I reported this privately to security@kernel.org and the ocfs2 maintainers
on 2026-06-20; with no response after the standard embargo period I am
posting the fix publicly. I have no embargo requirement.
This patch (of 2):
A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied
name length (migrate->namelen) without bounding it. dlm_init_mle() then
copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[]
array of an o2dlm_mle slab object, so a malformed message from a cluster
peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds
write of attacker-controlled data, reachable by any node in the domain.
Reject an oversized name, the way dlm_master_request_handler() and the
other o2dlm receive handlers already do; the migration handler omits the
check entirely. Conforming messages are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: terminate the strings from firmware
The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the
firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and
leaves the destination without a terminator.
Those destinations are model_number, serial_number and oem_info, each
BATTMGR_STRING_LEN and declared next to each other. They go out to user
space as val->strval, which power_supply_format_property() prints with
"%s", so a firmware string that fills the whole field makes that read run
into the following members.
Use strscpy() so the copy always terminates, the way the SM8350 path
already does for the same field. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate level in perf mask ioctls
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the per-level offset table on
invalid ioctl input. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
sk_store() and kek_store() strip a trailing newline from the sysfs
write before allocating the key buffer:
length = count;
if (buf[length - 1] == '\n')
length--;
bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL);
but then pass the original "count" (not "length") as the copy size to
hp_wmi_perform_query(), which memcpy()s that many bytes out of the
"length"-sized allocation, reading one byte past it whenever the write
ends in a newline, the normal case for a shell "echo" into sysfs.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg]
Read of size 28 at addr ffff88813c8e2b80 by task python3/16022
...
sk_store+0xa7/0x240 [hp_bioscfg]
kernfs_fop_write_iter+0x3e1/0x5d0
...
The buggy address is located 0 bytes inside of
allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b)
Reproduced identically for kek_store, and at multiple write sizes
(28, 57, 201 bytes), each time reading exactly one byte past a
kmemdup() allocation one byte smaller than the write.
Fix by passing "length" instead of "count" to hp_wmi_perform_query()
in both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
validate_password_input() computes length = strlen(buf) and then
checks buf[length - 1] to strip a trailing newline, without checking
that length is nonzero first. Writing an empty string (a bare '\n')
to current_password or new_password gives length == 0, and
buf[length - 1] reads buf[-1], one byte before the heap allocation
holding the copied input.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
Read of size 1 at addr ffff88811bd8da9f by task sh/13740
...
store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
current_password_store+0x14/0x20 [hp_bioscfg]
...
The buggy address is located 23 bytes to the right of
allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88)
Reproduced identically via new_password_store. Execution continues
past the bad read (the garbage byte only affects whether "length" is
decremented by one), so the write completes and returns success; this
is a pure information read past the buffer, not a crash, but it is
still an out-of-bounds access KASAN correctly flags.
Fix by only checking buf[length - 1] when length is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: pass validated element count to package parsers
The per-type package parsers are handed the wrong element count.
hp_init_bios_package_attribute() validates obj->package.count and then
calls one of the five hp_populate_*_package_data() wrappers (string,
integer, enumeration, ordered list, password). Each wrapper forwards a
count to its hp_populate_*_elements_from_package() parser, but instead
of forwarding the validated obj->package.count it derives the count
from elements[0]. elements[0] is the NAME field and is always an
ACPI_TYPE_STRING, so reading ->package.count from it in fact reads
->string.length through the union acpi_object. The parsers thus bound
themselves against the length of the name string rather than against
the real number of elements in the package.
This is safe today because hp_init_bios_package_attribute() refuses any
package that has fewer than the type's element count, so a parser only
ever runs on a full package and never reads past it regardless of the
bogus bound.
An upcoming change relaxes that check to accept shorter packages. Once
a parser can receive fewer elements than its per-type count, a bound
taken from the name length no longer reflects the array size, and the
"elem < count" loop conditions and "elem + n >= count" sub-loop guards
read past the end of elements[] - an out-of-bounds heap read.
Forward the validated obj->package.count to every *_package_data()
wrapper so the parsers bound themselves against the real package size.
This does not change behaviour for the packages that enumerate
correctly today and is a prerequisite for accepting shorter packages
safely. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: reset IP6CB after IPv6 decapsulation
decap_and_validate() pulls the outer SRv6 headers and makes the inner
packet the skb network header. The IPv6 control block still contains
values collected while parsing the outer packet, including nhoff and
extension-header flags.
End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6
input path. An unprivileged user can reach End.DT6 from a user and net
namespace by installing a local SID and injecting an outer packet with
Hop-by-Hop and Destination Options headers followed by an SRH and a
minimal inner IPv6 packet.
The outer extension headers leave a large nhoff in IP6CB. After
decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the
inner packet and reads beyond the skb head. KASAN reports:
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu
ip6_protocol_deliver_rcu+0x1118/0x1450
ip6_input_finish+0x11b/0x240
seg6_local_input_core+0xed/0x2e0
lwtunnel_input+0x1e9/0x4e0
ipv6_rthdr_rcv+0x525f/0x6c50
ip6_protocol_deliver_rcu+0xcb7/0x1450
Before clearing IP6CB for an inner IPv6 packet, save its incoming
interface index and L3 slave state. Restore both after the clear and set
nhoff to the inner IPv6 base-header nexthdr field.
Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can
replace skb_iif with the L3 master while IP6CB keeps the receiving
interface. Preserve IP6SKB_L3SLAVE for the same reason. |
