| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a possible underflow
We shouldn't trust the firmware about the length of the wowlan packet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: bound aligned TLV advance in FW parser
Validate ALIGN(tlv_len, 4) against remaining parser length before
consuming bytes from the firmware image.
This avoids length underflow on malformed TLVs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: acpi: validate WGDS table revision index
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: validate idmap key payload length
The cifs.idmap key type stores its payload length in key->datalen, which
is limited to U16_MAX. Accepting a larger key payload truncates the
recorded length and can make later users interpret the payload using
inconsistent bounds.
Reject oversized preparsed payloads before allocating or copying them.
This keeps key->datalen consistent with the stored data for both inline
and separately allocated idmap payloads. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
The KASAN allocation trace shows that a malformed IE buffer is
stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any
validation. The crash trace shows that a subsequent SIOCSIWESSID
triggers a connection attempt which calls cfg80211_sme_get_conn_ies()
to process the stored IE buffer, causing:
- An out-of-bounds read in skip_ie() which reads ies[pos+1]
(the length byte) past the end of the 1-byte buffer.
- An integer underflow in the memcpy size argument when offs
returned by ieee80211_ie_split() exceeds ies_len, causing
unsigned subtraction to wrap to SIZE_MAX and triggering a
fortify panic.
Fix this by validating the IE buffer in cfg80211_wext_siwgenie()
before storing it.
[drop unnecessary ie_len check, update commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the MCC
sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed.
KMSAN reports:
BUG: KMSAN: uninit-value in rfcomm_run
...
Uninit was created at:
__alloc_skb+0x474/0xb60
vhci_write+0xe9/0x870
Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1
(the minimum frame must have a 3-byte header and a 1-byte FCS). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatched until the host leaves SHOST_RECOVERY and
scsi_run_host_queues() is called - which only happens *after*
scsi_eh_lock_door() returns.
This forms a circular dependency:
- scsi_eh_lock_door(), running in the SCSI error handler thread, waits
for a sched tag held by a requeued command;
- the requeued command cannot complete and release its sched tag until
the error handler thread leaves scsi_restart_operations() and restart
the queues.
For devices with a single driver tag (e.g. USB storage) it is a
guaranteed deadlock and I/O that can never be submitted. This problem
has also been reproduced in our environment.
Locking the door is a best-effort operation, and scsi_eh_lock_door()
already returns silently when the request allocation fails. Pass
BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails
instead of blocking when no tag is available. This breaks the circular
dependency and allows the error handler to finish restarting the queues,
after which the pending commands are dispatched normally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: appletalk: fix NULL pointer dereference in aarp_send_ddp()
aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast
path without checking for NULL. When the device has no AppleTalk
interface configured (dev->atalk_ptr == NULL), this leads to a NULL
pointer dereference at the at->s_net access.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2))
Call Trace:
<TASK>
atalk_sendmsg (net/appletalk/ddp.c:1715)
__sys_sendto (net/socket.c:2265 (discriminator 1))
__x64_sys_sendto (net/socket.c:2272)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Add a NULL check consistent with the other callers of
atalk_find_dev_addr(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: embed f2fs_gc_kthread in f2fs_sb_info
Instead of allocating f2fs_gc_kthread dynamically, embed it in
f2fs_sb_info. This simplifies lifetime management and prepares for
fixing race conditions during teardown.
- __sbi_store - remount|shutdown
- f2fs_stop_gc_thread
- access sbi->gc_thread
- sbi->gc_thread = NULL
- access sbi->gc_thread->f2fs_gc_task |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, Termix derives the keys that wrap OIDC and WebAuthn users' Data Encryption Keys from committed default strings and the public userId salt in src/backend/utils/user-crypto.ts. Because OIDC_SYSTEM_SECRET and WEBAUTHN_SYSTEM_SECRET are not configured by the project's default deployment artifacts, an attacker with an offline SQLite database copy can derive the wrapping key, recover each affected user's DEK, and decrypt stored SSH passwords, private keys, and key passphrases. Password-authenticated users are not affected by this specific key derivation path. This issue is fixed in version 2.5.1. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 2.4.1 until 2.5.1, an authenticated Termix administrator can store attacker-controlled domain and email values through PATCH /users/acme-ssl-settings and trigger their interpolation into a certbot shell command through POST /users/acme-ssl-request. In src/backend/database/routes/acme-ssl-routes.ts, child_process.execSync invokes /bin/sh -c with those values only wrapped in double quotes, so shell metacharacters can execute arbitrary operating-system commands as the Termix backend process. Both HTTP webroot and DNS Cloudflare challenge modes are affected, and compromise exposes Termix databases, process secrets, stored credentials, and network reachability. This issue is fixed in version 2.5.1. |
| A protection mechanism failure in the object-document mapper's encryption configuration generation can cause fields that an application declared for client-side field-level encryption to be written and kept in cleartext, without any error or warning. A party holding ordinary read access to the database can then read values that were intended to be protected from that party. This may result in unintended disclosure of sensitive information. |
| Mongoid may omit encryption rules for fields declared on embedded models when generating the client-side field-level encryption schema. Applications that enable this feature can therefore store values intended to be encrypted in readable form, with no error or warning. A party with routine read access to the database, a backup, or the underlying data files may then see data that was meant to remain unreadable outside the application. |
| ZBar commit 2ea2ca58 contains an undefined-behavior vulnerability in the Code 128 decode6() function. When processing specially crafted Code 128 input, decode_e() can return -1 for an invalid edge pattern, and decode6() subsequently left-shifts this negative signed value while constructing the edge signature. The operation invokes undefined behavior and can terminate trap-mode UBSan builds with SIGILL, resulting in denial of service. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, the POST /credentials/:id/deploy-to-host endpoint resolves credential and target-host records from attacker-controlled credentialId and targetHostId integer values without checking that either record belongs to the requesting user. In src/backend/database/routes/credentials.ts, differential errors reveal whether credential and host records exist and disclose each record's authType value. Properly encrypted passwords and keys are not disclosed, but a key-authenticated victim host can receive an outbound SSH connection attempt using the attacker's public key. This issue is fixed in version 2.5.1. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 1.7.0 until 2.5.1, the Termix SSH key deployment flow derives a grep pattern from a user-controlled public-key token and interpolates it into double-quoted shell commands executed on the selected target host. In src/backend/database/routes/credential-deploy-routes.ts, both grep -F verification paths accept command substitution or quote-breaking shell syntax in keyPattern. An authenticated user who can deploy a crafted SSH credential can therefore execute commands with the selected remote account's privileges. The separate ACME command-injection report is outside this CVE's scope. This issue is fixed in version 2.5.1. |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by a log injection vulnerability through crafted LTPA token cookies. |
| libconfini 1.16.4 contains a heap out-of-bounds write condition involving the bundled load_ini_buffer.h utility and strip_ini_cache(). The bundled utility allocates exactly ini_length bytes, while strip_ini_cache() unconditionally writes a NUL terminator at ini_source[ini_length], requiring an additional writable byte. Applications using the bundled allocation pattern can trigger deterministic heap memory corruption when processing any non-empty INI input, resulting in denial of service. |
