| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung. |
| NanoSVG 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__curveDivs() during SVG stroke rasterization. A specially crafted SVG document containing an extremely large stroke-width can cause floating-point rounding to produce a zero subdivision angle. The subsequent arc division yields infinity, which is converted to int without range validation, resulting in undefined behavior and process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
affs: handle set_blocksize failures
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
bfs: handle set_blocksize failures
bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: handle set_blocksize failures
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
omfs: handle set_blocksize failures
omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: fix possible ISR soft lockup
There are rare cases in which the host gets stuck in the ISR because it
is flooded with messages during the startup phase.
The reason for the soft lockup in the ISR is the missing FIFO error IRQ
(FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers
the IRQ immediately again.
Fix this by adding a check for the FIFOE status and clearing the FIFO
if no data is ready (DR).
This behavior was observed on an AM62L device which uses the OMAP 8250
driver. Fix it for all 8250 drivers, since the OMAP driver's special
IRQ setup handling may trigger this behavior more frequently, but it
is not ensured that other 8250 drivers aren't affected. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind()
When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path
jumps to err_mode which frees the counter without decrementing
port_counter->num_counters. The only place that decrements is
rdma_counter_free(), which is unreachable since the counter was never
successfully bound.
This leak accumulates across repeated failures, permanently preventing
the port from switching to AUTO mode (-EBUSY in __counter_set_mode())
and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When
the mode was NONE before the call, the MANUAL mode set by
__counter_set_mode() also leaks since the revert logic is never
reached.
Add an err_bind label between the num_counters increment and the
existing err_mode label. It decrements num_counters and mirrors the
MANUAL→NONE revert from rdma_counter_free(), ensuring the port state
is fully restored on bind failure. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tegra/soctherma: Switch to devm cooling device registration
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: fix temp address generation after prefix deprecation
When a router temporarily deprecates an IPv6 prefix (either by sending a
Router Advertisement with Preferred Lifetime = 0 or by letting the
lifetime expire) and later restores it, the kernel permanently loses its
ability to generate temporary privacy addresses (RFC 8981) for that
prefix.
This happens because the address worker attempts to generate a
replacement temporary address when the current one nears expiration. As
the base prefix is deprecated already, the generation fails after
marking the temporary address as already having spawned a replacement
(ifp->regen_count++).
When the router eventually restores the prefix, the temporary address
becomes active again. However, once it naturally expires, the address
worker sees this temporary address already tried to generate one and
skips the regeneration.
Fix the issue by resetting the regen_count check of the latest temp
address generated for the prefix updated by the incoming RA. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib
[BUG]
A corrupted ntfs3 image can hit a NULL function pointer call in
generic_perform_write() after toggling system.ntfs_attrib and then
overwriting system.dos_attrib on the same file.
BUG: kernel NULL pointer dereference, address: 0000000000000000
\#PF: supervisor instruction fetch in kernel mode
\#PF: error_code(0x0010) - not-present page
PGD bed5067 P4D bed5067 PUD 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffff88801025f988 EFLAGS: 00010246
Call Trace:
generic_perform_write+0x409/0x8c0 mm/filemap.c:4255
__generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372
ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x63b/0xf70 fs/read_write.c:686
ksys_write+0x133/0x250 fs/read_write.c:738
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x77/0xc0 fs/read_write.c:746
...
[CAUSE]
system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags()
and switches i_mapping->a_ops to ntfs_aops_cmpr when
FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites
ni->std_fa from a one-byte DOS attribute value, clearing the compression
bit without updating ATTR_DATA or the mapping operations.
Old buffered writes use is_compressed(ni) to choose
__generic_file_write_iter(). That leaves generic_perform_write() calling
a NULL write_begin callback from ntfs_aops_cmpr.
[FIX]
Treat system.dos_attrib as a low-byte DOS attribute update and preserve the
existing non-DOS attribute bits in ni->std_fa. This keeps compressed and
sparse state consistent with ATTR_DATA and the mapping operations while
keeping the existing DOS attribute semantics intact. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate connectionless PSM length
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets. |
