Export limit exceeded: 24446 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93193 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup Sashiko reported a reference leak in rockchip_dp_drm_encoder_enable(), the of_get_child_by_name() function does not call of_node_put() in a symmetrical way [1]. Fix the device node reference leak by using __free(device_node) to automatically manage of_node_put() for all device nodes. | ||||
| CVE-2026-93191 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix incorrect task context in smack_msg_queue_msgrcv The smack_msg_queue_msgrcv() function incorrectly checks the permissions of the 'current' task instead of the 'target' task. In the msgsnd() syscall path, if a receiver is already waiting, the pipelined_send() optimization is used to push the message directly to the receiver task: ipc/msg.c`pipelined_send(): ` smp_store_release(&msr->r_msg, msg) In this case, the 'sender' (current) task performs the check on behalf of the 'receiver' task (msr->r_tsk, passed as the 'target' parameter): ipc/msg.c`pipelined_send(): ` security_msg_queue_msgrcv(,, target := msr->r_tsk,,) However, smack_msg_queue_msgrcv() ignores the 'target' and checks 'current': smack_msg_queue_msgrcv(…) ` smk_curacc_msq(isp, MAY_READWRITE); // current task 'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement, but 'target' (the receiver task) might NOT; as a result, an unauthorized receiver gets the message, violating MAC policy. Test: 1) create a sysv message queue with label “foo” 2) echo "bar foo r" >/smack/load2 3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled task. The task is waiting for the messages ... 4) msgsnd() from a "foo"-labeled task: "bar"-labeled task gets the message. This patch fixes the issue by checking permission on the 'target' task instead of 'current'. (2008-02-04, Casey Schaufler) | ||||
| CVE-2026-93187 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of input or output formats is zero, sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc() print an error and jump to the cleanup label. At that point 'ret' is still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so the function returns success and the caller never finds out that the widget setup actually failed. Set ret to -EINVAL before the goto so the error gets reported. | ||||
| CVE-2026-93185 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rt700-sdw: always drain jack work on remove rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only when rt700->hw_init is true. That state bit is cleared by rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a jack work item can already have been queued by rt700_interrupt_callback() or rt700_jack_init() while the device was initialized. Do not use hw_init as the remove-time guard for draining these work objects. The delayed works are initialized during rt700_init(), so remove can cancel them unconditionally and pair the object lifetime with the codec-private data lifetime instead of a mutable hardware state bit. This issue was found by our static analysis tool and then confirmed by manual review of the SoundWire status, interrupt and remove paths. The remove path should drain work based on whether the work object exists, not on a runtime hardware state bit that can change after the work was queued. A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and then entered remove. DEBUG_OBJECTS reported an active timer/work object associated with the rt700 jack work path after remove skipped the cancel. This is sent as an RFC because the practical trigger depends on SoundWire core remove ordering after an UNATTACHED status update. If remove cannot run after hw_init has been cleared while jack work is still pending, this is a defensive lifecycle cleanup rather than a reachable race on current systems. | ||||
| CVE-2026-93183 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/lima: call drm_mm_init() with a valid allocation range lima_vm_create() is currently run before va_start and va_end are set up, meaning they are both 0. lima_vm_create() runs drm_mm_init() with them as arguments for the allocator, and if DRM_DEBUG_MM is enabled the DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on exynos4412-odroid-u2: [ 1.736297] ------------[ cut here ]------------ [ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931! [ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 1.750697] Modules linked in: [ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT [ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree) [ 1.769446] Workqueue: events_unbound deferred_probe_work_func [ 1.775261] PC is at drm_mm_init+0x9c/0xa4 [ 1.779339] LR is at lima_vm_create+0x144/0x17c [ ... ] Fix the issue by moving the lima_vm_create() call after va_start and va_end are set up. | ||||
| CVE-2026-93181 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering. | ||||
| CVE-2026-93179 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read Reject voltage objects whose usSize is smaller than the header or would advance the cursor past the table end, preventing an infinite loop or heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. | ||||
| CVE-2026-93172 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed allocation check for pgdat->per_cpu_nodestats, which results in a NULL deref when we offset into the per-cpu area. Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing at boot_nodestats so a later online can retry the allocation. hotadd_init_pgdat() returns NULL on failure, which __try_online_node() already maps to -ENOMEM. On failure nothing needs to be unwound: - the node is never marked online - per_cpu_nodestats is left pointing at boot_nodestats - __add_memory_resource() cleans up pending memblock resources - later online attempts retry the per_cpu_nodestats allocation | ||||
| CVE-2026-93171 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: leds: lp5860: Fix a potential double-unlock In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked mutex is unlocked another time. Slightly rework how the lock is taken/released to avoid this potential double unlock. | ||||
| CVE-2026-93169 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: fix race between runtime PM and device removal In zynqmp_dma_remove(), runtime PM was disabled only after checking state and doing a manual suspend. This can race with runtime PM in the remove/unbind (rmmod) path. Disable runtime PM first, then suspend only if the device is not already suspended. To prevent any further runtime PM transitions. | ||||
| CVE-2026-93167 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall arguments from pt_regs before calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall arguments are prepared as stack arguments before invoking syscallid. The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since those offsets are relative to the original pt_regs base, loading them after changing sp fetches the wrong slots. As a result, traced syscalls that use the 5th or 6th argument may receive corrupted arguments. This is visible with mmap2(), which takes six arguments. A small PTRACE_SYSCALL reproducer opens a file and maps one page with: mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0) Before the fix, the traced child fails the mmap and exits with 12. After the fix, the mapping succeeds and the child exits with 0. Fix the trace path by loading a4/a5 from pt_regs before changing sp. Tested on: ck860f, linux-4.19.15, C-SKY abiv2 | ||||
| CVE-2026-93164 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/ [2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t | ||||
| CVE-2026-93163 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | ||||
| CVE-2026-93155 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Fix AEAD unregister count in error path register_aes_algs() registers the AEAD algorithms before registering the skcipher algorithms. If skcipher registration fails, the function unwinds the earlier AEAD registration with crypto_engine_unregister_aeads(), but it passes ARRAY_SIZE(algs), which is the skcipher table size. Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper iterates over the same table that was registered. Also clarify the nearby comment: the crypto registration helpers clean up algorithms registered within the same call, while this function must still unwind earlier successful registration steps. | ||||
| CVE-2026-93150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Make nr_deadline_tasks an atomic_t The nr_deadline_tasks variable in the cpuset structure was introduced by commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks can currently be modified by inc_dl_tasks_cs() under rq->lock and by cpuset_attach() under cpuset_mutex. So if both updates happen simultaneously, the nr_deadline_tasks variable can be corrupted leading to incorrect operations down the road. Fix that by changing its type to atomic_t so that nr_deadline_tasks are always atomically updated. This fix patch is a low hanging fruit. It can handle some of the races between a concurrent sched_setscheduler() and cpuset_can_attach()/cpuset_attach() calls, but not all of them like the other issue raised by sashiko [2]. This will be handled hopefully in a future follow up patch. [1] https://sashiko.dev/#/patchset/20260626181923.133658-1-longman%40redhat.com [2] https://sashiko.dev/#/patchset/20260630033344.352702-1-longman%40redhat.com | ||||
| CVE-2026-93149 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: avoid NULL skb in stop queue drain mac80211_hwsim_stop() drops any frames left in data->pending. The loop currently checks skb_queue_empty() and then dequeues separately. That split is racy with TX status handling, which can remove a pending frame under the queue lock. If the last entry is removed after the empty check, skb_dequeue() returns NULL and the stop path passes that NULL skb to ieee80211_free_txskb(). Use skb_dequeue() as the loop condition instead. The dequeue result is the object that stop owns and frees, and a concurrent status completion that empties the queue simply makes the loop terminate. | ||||
| CVE-2026-93146 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: time/namespace: Validate nanosecond field in proc_timens_set_offset() The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX] but never validates that tv_nsec is within the valid range of [0, NSEC_PER_SEC-1] before using it in timespec64_add(). timespec64_add() expects both timespec64 structures to have normalized values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec contains invalid values (negative or >= NSEC_PER_SEC), it could lead to incorrect calculations or unexpected behavior. Add validation to ensure tv_nsec is within the valid range before performing the addition. | ||||
| CVE-2026-93142 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/rcar: Fix error checking in probe() This code accidentally calls thermal_zone_device_enable() before checking whether thermal_zone_device_register_with_trips() failed. Move the call until later to avoid an error pointer dereference of "priv->zone". The driver works differently depending on if we are using OF thermal or not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and call thermal_zone_device_enable() if not. We can share same error check for if either of these fail. Moving the thermal_zone_device_enable() call is a bit cleaner as well. The original code used a three step process to cleanup: 1. Call thermal_zone_device_unregister() to cleanup. 2. Set priv->zone to an error pointer to preserve the error code. 3. Set priv->zone to NULL to avoid a second call to thermal_zone_device_unregister() in the rcar_thermal_remove() function. Now we can just do a direct goto error_unregister and rcar_thermal_remove() handles the cleanup properly. | ||||
| CVE-2026-93140 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while writing the Logical Volume Integrity Descriptor (LVID) buffer to the block device, the block layer's completion handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the buffer. However, the buffer still contains valid LVID data in memory. If the filesystem is subsequently remounted read-write or synced, `udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call `mark_buffer_dirty()`. This triggers a spurious `WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()` because the buffer is not marked uptodate, even though its in-memory contents are valid and are about to be overwritten. To prevent this spurious warning, unconditionally set the `BH_Uptodate` flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and `udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and matches the workaround previously applied to `udf_close_lvid()` in commit 853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty"). Extending this workaround ensures consistent behavior across all LVID updates. Buffer I/O error on dev loop0, logical block 128, lost sync page write ------------[ cut here ]------------ !buffer_uptodate(bh) WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087 ... Call Trace: <TASK> udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078 udf_reconfigure+0x336/0x540 fs/udf/super.c:679 reconfigure_super+0x232/0x8f0 fs/super.c:1080 vfs_cmd_reconfigure fs/fsopen.c:268 [inline] vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297 __do_sys_fsconfig fs/fsopen.c:463 [inline] __se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350 do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 </TASK> | ||||
| CVE-2026-93139 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries uninitialized for multi-XCC GPUs. This causes null pointer dereferences when accessing arrays indexed by XCC ID >= 2. Extend the loop to cover all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC arrays. | ||||