| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where a user could cause a type confusion via a handle recycle race. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the CUDA driver where an attacker could cause a library to be loaded from an uncontrolled search path. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, data tampering, and denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where improper verification of cryptographic signatures may cause signature verification to be bypassed under memory pressure. A successful exploit of this vulnerability might lead to denial of service and data tampering. |
| urllib3 is an HTTP client library for Python. From 1.26.0 until 2.8.0, the proxy_ssl_context, proxy_assert_hostname, proxy_assert_fingerprint, ssl_context, cert_reqs, verify_mode, use_forwarding_for_https=True, and CERT_NONE configuration paths fail to remain separated because target-server TLS settings are incorrectly applied to the HTTPS proxy connection. The trigger is that an application uses an HTTPS proxy and configures target-server TLS settings that must remain separate from the proxy TLS handshake, including HTTPS forwarding with target-specific identity or credentials. Applying cert_reqs=CERT_NONE can overwrite proxy_ssl_context.verify_mode in place, and the mutation persists so later connections reusing the same context may connect to the HTTPS proxy without certificate verification. The attack mechanism is that an attacker intercepts and impersonates the HTTPS proxy after the effective proxy policy accepts the attacker's certificate. The impact is that the attacker can observe or modify forwarded traffic or receive a target TLS client certificate, while CONNECT tunneling still preserves the separate end-to-end target TLS connection. This issue is fixed in version 2.8.0. |
| DCMTK through 3.7.0 contains a heap over-read vulnerability in ConcatenationLoader that copies pixel data frames without validating the PixelData buffer length against the declared NumberOfFrames. Attackers can craft malicious DICOM instances declaring more frames than the buffer contains to trigger heap over-reads that crash the application or leak adjacent heap memory. |
| Flatpak creates temporary child repository directories under the user cache with world-writable permissions (0777). On multi-user systems with a permissive umask, other local users could read or modify the temporary directory used while installing apps or runtimes, potentially causing installation failures (denial of service); tampered content would fail signature/digest verification rather than being trusted. |
| On a multi-user system, a user with an active local login session could downgrade a system-wide Flatpak app to an older version by removing the app's remote ref via the unprivileged system-helper RemoveLocalRef method, causing the anti-downgrade check to fail to find a reference date. A malicious local user could use this to expose other users of the same system to an app version with unfixed vulnerabilities. |
| An OS command injection flaw was found in the set_hostname_internal function of NooBaa's cluster_internal_api. This component is responsible for managing the Multi-Cloud Object Gateway in OpenShift Data Foundation. The vulnerability occurs because the hostname parameter is passed directly to a shell command without proper sanitization. An authenticated attacker with administrative privileges can provide a specially crafted hostname containing shell metacharacters to execute arbitrary commands on the host system with the privileges of the NooBaa process. |
| A denial-of-service vulnerability exists in the API endpoint of HPE Networking Instant On that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service, which resumes without manual intervention. |
| An authentication bypass vulnerability in the captive portal of HPE Networking Instant On could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain limited access to some data and to make limited changes within the affected component. |
| An authentication bypass vulnerability exists in the PAPI protocol of HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to circumvent certain existing authentication mechanisms and send unauthorized network traffic to the target device. |
| A format string vulnerability in the API endpoint of HPE Networking Instant ON APs could allow an authenticated remote attacker with high privileges to cause memory corruption with a modified input. Successful exploitation could allow an attacker to provoke a denial-of-service condition or remote code execution in the affected system function. |
| An authentication bypass vulnerability in the API endpoint of HPE Networking Instant ON could allow an unauthenticated remote attacker to bypass network access controls if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to obtain unauthorized access to restricted networks. |
| Buffer overflow vulnerabilities exist in the affected interface of HPE Networking Instant ON APS that could allow an unauthenticated adjacent attacker to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
| Uncontrolled Format string vulnerabilities exist in the affected interface of HPE Networking Instant ON APs that could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host. Successful exploitation could result in a Denial-of-service or potential remote code execution. |
| Buffer overflow vulnerability exists in the affected interface of HPE Networking Instant ON that could allow an unauthenticated remote attacker to run arbitrary code on the underlying host. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| An Origin Validation Error in the middleware of the connect-xcors npm package allows an attacker to bypass origin verification and perform a cross domain authenticated request. |
| The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. |
| The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it.
Any user-mode thread that has been granted a struct rtio kernel object can invoke the syscall with an arbitrary address in handle. That is the ordinary way an unprivileged thread uses the RTIO API, for example via sensor_read_async_mempool() or the async ADC helpers, which call rtio_sqe_copy_in_get_handles() internally. The store happens in supervisor mode before any submission-entry validation, so it fires regardless of whether the SQE contents are subsequently rejected. Only builds with CONFIG_USERSPACE and CONFIG_RTIO are affected; without CONFIG_USERSPACE the verifier is not compiled and the caller is already privileged.
The write address is fully attacker-chosen and the written value is a pointer into the caller's own RTIO ring, whose contents the caller controls (the following *sqe = sqes[i] copies an attacker-supplied struct rtio_sqe into that slot). This yields a write-what-where primitive placing a pointer to attacker-controlled data at any kernel address, sufficient to corrupt kernel function pointers, thread structures, or memory-domain partition tables, and thus to escalate from user mode to kernel mode, defeating the isolation boundary CONFIG_USERSPACE is meant to enforce. At minimum it is a reliable kernel memory-corruption and crash primitive. The reporter reproduced the write on qemu_x86: a K_USER thread changed a supervisor global from NULL to a live kernel SQE pointer.
The fix adds K_SYSCALL_MEMORY_WRITE(handle, sizeof(*handle)) (guarded by the existing optional-NULL semantics) before the loop, so the destination must lie in the calling thread's writable memory domain or the thread is terminated by K_OOPS. The neighbouring verifier z_vrfy_rtio_cqe_get_mempool_buffer(), which checked its buff/buff_len out-parameters only for read although the implementation writes through them, was hardened separately by bea93400138 ("rtio: syscalls: validate output params as writable"); that residual was materially weaker, since a read check still confines the target to the caller's own memory domain. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Cargo extension allows Reflected XSS.
This issue affects Mediawiki - Cargo extension: before 1.46.1. |
