Export limit exceeded: 395806 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10823 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80800 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(), and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same pattern remains unbounded: nfc_llcp_connect_sn(). nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header (type, length) followed by length bytes of value, without checking that the two header bytes or the declared length stay within the buffer. It returns a pointer to a service name of up to 255 bytes that may point past the end of the skb; it is subsequently consumed by memcmp() in nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as "skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter than the LLCP header underflows to a huge length and the walk runs far past the buffer. nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP, and the nfc_llcp_rx_skb() dispatcher applies no minimum-length guard. Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and validate each declared length before use, matching the approach already used for nfc_llcp_recv_snl(). Starting the walk at &skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the size_t underflow for short frames. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80765 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length. | ||||
| CVE-2026-80772 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here. | ||||
| CVE-2026-80875 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in TCP state lookup TCP state handling reparses the skb to find the TCP header. For IPv6 it uses sizeof(struct ipv6hdr), while the surrounding IPVS code already parsed the packet with ip_vs_fill_iph_skb() and has the real transport-header offset in iph.len. This makes TCP state handling look at the wrong bytes when an IPv6 packet carries extension headers. Use the parsed transport offset passed down from ip_vs_set_state() when reading the TCP header. For IPv4 and for IPv6 packets without extension headers, the passed offset matches the previous value. | ||||
| CVE-2026-55402 | 1 Absolute | 1 Secure Access | 2026-09-04 | 5.9 Medium |
| CVE-2026-55402 is an out of bounds read vulnerability in Secure Access servers prior to version 14.57. Attackers with an ‘in the middle’ position can send specially crafted data to a server causing a persistent denial of service. | ||||
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-80839 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject unrepresentable multicast TVLV offsets The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. | ||||
| CVE-2026-64200 | 1 Measx | 1 Dasylab | 2026-09-04 | 7.8 High |
| There is an out-of-bounds read vulnerability in DASYLab due to improper validation of user-supplied data. This results in a read a past the end of an allocated heap buffer during string conversion. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. | ||||
| CVE-2026-64199 | 1 Measx | 1 Dasylab | 2026-09-04 | 7.8 High |
| There is an out-of-bounds read vulnerability in DASYLab due to improper validation of user-supplied data. This results in a read outside the bounds of an allocated data structure. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. | ||||
| CVE-2026-64198 | 1 Measx | 1 Dasylab | 2026-09-04 | 7.8 High |
| There is an out-of-bounds read vulnerability in DASYLab due to improper validation of user-supplied data. This results in a read a few bytes past the end of an allocated heap buffer during file handling. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. | ||||
| CVE-2026-80827 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: option: fix slab OOB read in interrupt URB callback The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(struct usb_ctrlrequest)] which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte buffer. This results in a slab out-of-bounds read. Fix this by adding the missing bounds check: first verify that the actual length is large enough to contain the struct usb_ctrlrequest header before accessing req_pkt->bRequestType and req_pkt->bRequest, and then verify that there is an additional byte for the modem signal state before reading data[sizeof(struct usb_ctrlrequest)] inside the conditional. Use sizeof(*req_pkt) instead of sizeof(struct usb_ctrlrequest) for consistency. [ johan: use dev_err(); split signals declaration and initialisation ] | ||||
| CVE-2026-43820 | 1 Apple | 1 Swiftnio Ssl | 2026-09-04 | 7.7 High |
| NIOSSLCertificate._subjectAlternativeNames provides access to the raw bytes for a cert's SANs. NIOSSL provides access to a buffer assumed to be backed by an ASN1_STRING, but not all SANs are backed by ASN1_STRING, so accessing the buffer for such a type can lead to out-of-bounds memory access. This vulnerability is addressed in swift-nio-ssl version 2.37.2. | ||||
| CVE-2026-85455 | 1 Themoos | 1 Core-moos | 2026-09-04 | 8.2 High |
| MOOS core-moos through 10.4.0 contains a buffer over-read vulnerability in CMOOSCommPkt where a four-byte packet triggers out-of-bounds memory access during deserialization. Attackers can open a TCP connection to the MOOSDB port and send a crafted short packet to read memory before authentication. | ||||
| CVE-2026-80803 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res field without an upper-bound check. A nearby malicious NFC-F device can send an oversized SENSF_RES response to overflow the stack-local struct nfc_target. Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80805 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: validate attr entry pointer before field access xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen, valuelen) before checking if the entry pointer itself is within bounds. If nameidx is crafted to point near the end of the buffer, these field accesses can read out-of-bounds before the bounds check at name_end > buf_end is performed. Add explicit bounds checks for entry pointers before accessing their fields. Use offsetof() to check that the start of the flexible array member (nameval/name) is within bounds, which ensures all preceding fields are safe to access. | ||||
| CVE-2026-80759 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment. | ||||
| CVE-2026-80812 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the given devptr->id value is within the proper card index range. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80814 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that data_offset + data_len + 8 does not wrap, which would enable an OOB read of the USB data buffer. | ||||
| CVE-2026-80781 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array. A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards. Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80823 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length is at least sizeof(struct st21nfca_atr_req), but never checks that atr_req->length does not exceed the actual received length (skb->len). st21nfca_tm_send_atr_res() then trusts the declared length: gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); ... memcpy(atr_res->gbi, atr_req->gbi, gb_len); so an RF peer that sends a short frame but sets atr_req->length larger than the frame makes gb_len exceed the general bytes actually present, and the memcpy reads out of bounds past the received skb. Those bytes are placed in the ATR_RES and sent back to the peer (kernel-memory disclosure to a proximity attacker); a larger declared length is an out-of-bounds read (DoS). Reject frames whose declared length exceeds the received length. The adjacent nfc_tm_activated() path in the same function already derives its general-bytes length from skb->len rather than the declared field. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||