| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WX Subscribe 微信支付付费订阅 WordPress plugin through 1.2.1 does not sanitise and escape a parameter before using it in a SQL statement, allowing unauthenticated attackers to perform SQL injection attacks on installs where the payment key has not been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of share_conf in compound request
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| The Wp Map Block plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the set_status() and bulk() functions in the Maps_Controller REST controller in versions up to, and including, 3.0.0. The plugin's permission_callback (can_edit()) only verifies current_user_can('edit_posts') and performs no object-level ownership check or verification of publish-level capabilities, while the handlers pass the caller-controlled map ID directly to wp_update_post() (and wp_delete_post() in the bulk delete branch) to change post_status between publish and draft. This makes it possible for authenticated attackers, with Contributor-level access and above, to publish or unpublish (and bulk-delete) any wpmb_map post, including maps owned by administrators, which hides published maps from all public pages site-wide or forces draft maps to become publicly visible. |
| The WP Booking System – Booking Calendar plugin for WordPress is vulnerable to generic SQL Injection via the 'data[orderby]' parameter in all versions up to, and including, 2.1.0.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires the targeted calendar to have more than 200 bookings, as the orderby value is only forwarded to the database layer when the AJAX handler takes the use_ajax branch; an Administrator can satisfy this condition by creating bookings directly. |
| The Mail Mint plugin for WordPress is vulnerable to SQL Injection via the 'filters' parameter of the /wp-json/mrm/v1/segments/contacts REST endpoint in versions up to, and including, 1.31.4 This is due to insufficient escaping on the user supplied filter 'value' before it is appended to a SQL query in SegmentFilterService::get_meta_join_query() at line 797, where the value is string-interpolated into the WHERE fragment in a numeric (unquoted) context and the surrounding $wpdb->prepare() calls do not cover the injected value. This makes it possible for authenticated attackers, with the custom 'mint_read_contacts' capability (granted to Administrators by default, and configurable to lower roles via the plugin's role manager), to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Missing Authorization vulnerability in WordLift Srl WordLift wordlift allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WordLift: from n/a through 3.54.15. |
| The NotificationX plugin for WordPress is vulnerable to Missing Authorization leading to arbitrary content injection in versions up to, and including, 3.3.3 The /notificationx/v1/popup-submit REST route is registered with permission_callback => '__return_true', and the handler at PopupNotification::handle_popup_submission() accepts an attacker-controlled nx_id, loads whichever NotificationX campaign that id points to, and copies that campaign's own source into the new entry without verifying that the campaign is a Popup Notification or Exit Intent Popup (the two sources this form is intended to serve). This makes it possible for unauthenticated attackers to inject forged social-proof entries (name, title, message, email, theme) into any enabled non-popup NotificationX campaign — WP Comments, WooCommerce/EDD/Give sales, reviews, etc. |
| The Klarna for WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.13.3 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to access any order's secret order_key and full billing and shipping PII — including first name, last name, email address, phone number, street address, postcode, city, region, and country — emitted inline as the klarna_payments_params JavaScript variable, enabling full store-wide order enumeration. Because WooCommerce order IDs are sequential integers and no order_key or authenticated session is required, every order in the store can be trivially enumerated with sequential GET requests to the order-pay endpoint. |
| Missing Authorization vulnerability in Planet studio PlanetStudio Payment Gateway planetstudio-payment-gateway allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PlanetStudio Payment Gateway: from n/a through 1.3.3. |
| Missing Authorization vulnerability in WPdreams Ajax Search Lite ajax-search-lite allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ajax Search Lite: from n/a through 4.14.5. |
| The Vitepos – Point of Sale (POS) for WooCommerce plugin for WordPress is vulnerable to blind SQL Injection via the 'src_by[].val.start / src_by[].val.end (operator 'bt')' parameter in all versions up to, and including, 3.6.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with vendor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is an incomplete fix for a previously patched SQL injection (version 3.6.0), which addressed only the gt/lt/le/ge operators while leaving the 'bt' (BETWEEN) operator branch unpatched. |
| The WSP MCP AI Agents Connector plugin for WordPress is vulnerable to Sensitive Information Disclosure in versions up to, and including, 2.9.5. This is due to the wsp_get_posts MCP tool being registered with an empty capability requirement while the MCP endpoint's authenticate() method accepts any logged-in user, and the wsp_execute_get_posts() callback honouring a caller-supplied status=all argument that expands into a WP_Query over 'publish', 'draft', 'pending' and 'future' posts with no author or ownership filter. This makes it possible for authenticated attackers, with Subscriber-level access and above, to read the titles, URLs, authors, categories, tags and 40-word excerpts of every unpublished (draft/pending/scheduled) post on the site. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in TMS Amelia ameliabooking allows SQL Injection.This issue affects Amelia: from n/a through 2.4.10. |
| The Photo Engine (Media Organizer & Lightroom) plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 6.5.6 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to permanently delete arbitrary media attachments via wp_delete_attachment and upload new attachments to the site, actions that require the upload_files or edit_others_posts capabilities. A Subscriber-level user can obtain their own wplr_auth_token directly from the profile.php page source, because the admin screen guard in Meow_WPLR_Sync_Admin::__construct() is commented out, causing wp_localize_script to leak the token into every admin page view; this token can then be used from a cookie-less HTTP session to invoke destructive actions on the /?wplr-sync-api endpoint. |
