| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: bound the hwdep mmap fault offset
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: fix OOB write in fcp_meter_ctl_get()
fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size
by the driver's own limit of 255
if (map.map_size < 1 || map.map_size > 255 ||
map.meter_slots < 1 || map.meter_slots > 255)
return -EINVAL;
and passes it to fcp_add_new_ctl() as the control's channel count, where
it is stored as elem->channels.
Every control read writes into struct snd_ctl_elem_value, whose integer
array is declared long value[128], so the limit is 128, not 255.
fcp_meter_ctl_get() stores one 64-bit word per channel into that array
with no bound of its own:
for (i = 0; i < elem->channels; i++) {
int idx = private->meter_level_map[i];
int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]);
ucontrol->value.integer.value[i] = value;
}
snd_ctl_elem_read_user() serves that object from
memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of
kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so
element i is written at byte 72 + 8 * i and element 144 already lands
past the allocation. At map_size 255 the last store ends at byte 2112,
888 bytes past the object and 64 bytes into the adjacent slab object.
The stored words come from the device and meter_level_map[] selects
which word lands in which slot, so extent and contents are both
controlled.
The core does not catch this. snd_ctl_check_elem_info() is reached only
from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under
CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a
compile-time true. __snd_ctl_add_replace() validates kcontrol->count and
never inspects elem->channels.
Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives
the hwdep descriptor that created it, so the out-of-bounds stores are
issued by any process able to read controls on /dev/snd/controlC0.
KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read:
BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get
Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185
__asan_store8
fcp_meter_ctl_get
snd_ctl_elem_read
snd_ctl_ioctl
Allocated by task 185:
memdup_user
snd_ctl_ioctl
The buggy address is located 0 bytes to the right of
allocated 1224-byte region [ffff000017af0000, ffff000017af04c8)
Bound the map size by the ABI limit rather than by 255, and bound the
store loop at the sink so it cannot run past the value array whatever
elem->channels holds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: release template ct on non-IP path
A bridge nftables ct zone set rule can attach a conntrack template to
an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6
EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with
IP_CT_UNTRACKED without releasing the existing template reference.
That makes the per-cpu template, and any temporary templates allocated
for concurrent use, unreachable and leaks memory until the host runs out
of slab.
Reset the skb conntrack state before marking the frame untracked so the
existing template reference is dropped on the non-IP path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: reject clones that overrun skb_shared_info tailroom
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip6ip6_err()
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use consistent hard_header_len in non-ring send paths
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue. |
| In the Linux kernel, the following vulnerability has been resolved:
igbvf: Fix leak in TX DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with
ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each
subframe it passes the subframe data pointer to
mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the
length of the A-MSDU parent, instead of rx_skb->len:
rx_skb = __skb_dequeue(&list);
rx_hdr = (struct rx_packet_hdr *)rx_skb->data;
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr,
skb->len);
}
The parent is not a valid description of that buffer, and may not be
valid memory at all. ieee80211_amsdu_to_8023s() ends with
if (!reuse_skb)
dev_kfree_skb(skb);
and it only sets reuse_skb when the parent is linear, is not a
head_frag, and is being consumed as the *last* subframe. So when the
parent does not qualify for reuse it has already been freed, and the
read of skb->len is a use-after-free. When it is reused, skb->len is
the length of the last subframe, applied to every earlier subframe,
which over-states the buffer whenever an earlier subframe is shorter.
The callee cannot absorb a wrong length, because it derives its own
ceiling from the value it is given. Each frame type computes
ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN;
and the element walk is then bounded entirely against that ceiling,
for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) {
u8 ie_len = pos[1];
if (pos + 2 + ie_len > end)
break;
so a too-large len moves end past the end of the subframe and the walk
reads and copies beyond it. The A-MSDU layout is chosen by the sender,
which makes the difference between the last subframe and a shorter
earlier one remotely selectable. Reaching this requires TDLS support in
firmware and the TDLS ethertype on the subframe.
The other caller, mwifiex_process_rx_packet(), is correct: it passes a
pointer and a length that describe the same region of the RX buffer.
Pass rx_skb->len, the length of the subframe actually being parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: prevent peer transport count overflow
sctp_assoc_add_peer() increments the association's 16-bit transport_count
for every new unique peer. Adding the 65,536th transport wraps the count to
zero.
SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload,
then copies one sockaddr_storage for every entry in transport_addr_list.
After the wrap, a diagnostic dump reserves an empty payload and writes
8 MiB of peer addresses past the skb tail.
Reject a new unique peer when transport_count has reached U16_MAX. Perform
the check after the existing-peer lookup so a duplicate address continues
to return its existing transport at the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix netns teardown to cancel the preallocation charger
Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).
Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.
(This was found by AI review). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path. |
