| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
ipu7_resume() calls pm_runtime_get_sync() before resuming the device.
If the runtime PM resume fails, the usage count remains incremented, but
the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
on failure and avoids the leak. Keep returning 0 on error, as resume
callbacks should not propagate failures to the PM core, matching the
behaviour of the ipu6 driver. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during early boot, real
module unload of a clk driver that owns GDSCs, or an OF-overlay tear-
down) the next gdsc_init() will end up trying to re-register a name
that is still in the list and pm_genpd_init() returns -EEXIST.
While we are here, flip the order so the consumer-facing OF provider
entry is the first thing removed -- otherwise a fresh
of_genpd_get_from_provider() call racing with the teardown could
attach to a domain that is mid-removal.
Iterate the scs[] array and pm_genpd_remove() each registered domain
after the subdomain links are torn down. The regulators stay devm-
managed (devm_regulator_get_optional() in gdsc_register()), so the
release happens automatically when the underlying device is unbound;
just the genpd accounting needs to be undone explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Use acquire/release for queue enabled state
apple_nvme_init_queue() initializes queue state and then marks the queue
enabled. The interrupt and request paths check enabled before using that
queue state.
The old wmb() after WRITE_ONCE(enabled, true) does not publish the
earlier initialization before enabled becomes visible. Use a release store
when enabling the queue and acquire loads when testing it.
Although the shutdown-side enabled accesses are not used for publishing
queue initialization, use helpers for them as well for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bng_re: return a timeout when firmware responses stall
__wait_for_resp() documents that it returns a non-zero error when a
firmware command does not complete, and bng_re_rcfw_send_message() already
marks the firmware as stalled when the helper returns -ENODEV.
However, the helper ignores wait_event_timeout() expiry. If the response
slot remains in use after the timeout and after the polled CREQ service
attempt, the loop starts another full timeout period and can repeat
forever.
Return -ENODEV after a timed out wait that still has no response. The
existing caller then marks FIRMWARE_STALL_DETECTED and returns
-ETIMEDOUT to the command issuer. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: rk3288 - fail ahash requests on HASH idle timeout
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: xilinx-trng - propagate timeout before any data is read
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sa2ul - stop probe if context pool creation fails
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-ecc - reject hardware ECDH without a public key
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - clear AES key schedule from stack
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - cancel work on re-enable SR-IOV timeout
The QAT reset worker queues SR-IOV reenable work using a work_struct and
completion embedded in an on-stack adf_sriov_dev_data. If the completion
wait times out, the reset worker can return while device_sriov_wq still
holds or executes the stack-backed work item.
Cancel the work on the device_sriov_wq on timeout before the stack frame
unwinds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: debug: fix off by on in rtw89_ppdu_str()
This > comparison should be >= to avoid an out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
corruption or missed completions.
Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind P2A receiver mailbox setup failure
mailbox_chan_setup() can request an additional P2A receiver channel after
successfully acquiring the primary P2A channel. If that later request
fails, the function returns immediately and leaves the primary channel
allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Reject out of range DT protocol IDs
SCMI protocol IDs carried in message headers are limited by
MSG_PROTOCOL_ID_MASK. The DT parsing paths noticed protocol IDs
outside that range, but only logged an error and then kept processing
the invalid value.
That lets a malformed 32-bit DT reg value reach helpers which take a u8
protocol ID, where it can be truncated and/or treated as a different
protocol.
For channel setup, two different out-of-range values can also be used as
distinct IDR keys while aliasing the generated SCMI protocol identity.
Skip DT protocol nodes whose reg value does not fit the SCMI protocol ID
field before setting up channels or creating protocol devices. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Avoid IDR updates while cleaning channels
scmi_cleanup_channels() walks the TX/RX channel IDRs with
idr_for_each() to free transport resources and destroy the dedicated
transport devices before calling idr_destroy().
The destroy callback removed each entry from the same IDR being walked.
That is not needed for this cleanup path, and it is unsafe because
idr_for_each() has not advanced its radix-tree iterator while the
callback is running. Removing the current entry from the callback can
invalidate the iterator state. The callback also cannot be protected by
rcu_read_lock(), because scmi_device_destroy() may sleep.
Leave IDR teardown to the following idr_destroy() call and keep the
callback limited to device destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Free transport channel on IDR failure
If transport channel setup succeeds but the following IDR insertion fails,
the error path destroys the transport device and frees the channel info
without invoking the transport cleanup callback.
Call chan_free() before destroying the device so transport specific
resources such as IRQs, mailbox channels and mapped shared memory are
released consistently with the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Publish channel state before callbacks
Transport setup can enable callbacks before the setup routine returns.
mailbox_chan_setup() registers the mailbox client with
mbox_request_channel(), and the mailbox controller startup path can enable
interrupt delivery before SCMI mailbox channel state has been published.
Similarly, smc_chan_setup() requests the optional A2P completion IRQ before
the SMC transport has made its cinfo pointer visible.
If a pending or spurious callback fires in those windows, the transport RX
callback can dereference a NULL transport cinfo pointer. Publishing only
the transport-private pointer is not sufficient either: an early callback
can enter the SCMI core before scmi_chan_setup() has assigned
cinfo->handle.
The core derives scmi_info from cinfo->handle in the RX path, so a NULL
handle can still fault even when the transport-private cinfo is valid.
Assign cinfo->handle before invoking the transport setup callback. Publish
the mailbox and SMC transport-private channel state before requesting the
mailbox channels or IRQ, and clear the early-published pointers again on
setup failure. Also unwind mailbox setup devres resources on failure so an
optional RX setup error that is ignored by the core does not leave stale
transport state behind. |
