| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: size a connection's path set by the transport it ends up with
__rds_conn_create() computes npaths from the caller's transport before
it decides whether a connection to one of the host's own addresses is
to be handled by the loopback transport instead. That substitution is
what an RDS/TCP socket sending to a local address gets, and after it
the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS
paths and allocates an ordered workqueue for each, while
rds_loop_conn_alloc() only ever provides transport data for path 0.
rds_conn_destroy() sizes its teardown from c_trans, by then the
loopback transport, so it visits path 0 only - and
rds_conn_path_destroy() would skip the other paths anyway, since it
returns before destroy_workqueue() for a path without transport data.
kfree(c_path) then drops the last pointers to seven workqueues. That
repeats for every such connection, on every netns teardown or module
unload, and every distinct local destination address is a separate
connection.
Recompute npaths once the transport is final, so that creation and
destruction agree on the set of paths. The c_path array stays sized
for the caller's transport; the unused entries are freed with it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: flush skb_defer_nodes in dev_cpu_dead()
When a CPU goes offline, dev_cpu_dead() drains its softnet queues
(completion_queue, output_queue, poll_list, process_queue, and
input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched.
If oldcpu goes offline while holding pending skbs in its
skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI
threshold, or if the IPI races with CPU teardown), those skbs remain
stranded until oldcpu is brought back online. If any of these skbs
hold page_pool fragments, page_pool_destroy() will stall indefinitely
waiting for inflight pages to be returned when a netdev or driver is
torn down while oldcpu is offline.
Additionally, if smp_call_function_single_async() fails in
kick_defer_list_purge() because the target CPU went offline, reset
defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the
CPU comes back online.
Also, if oldcpu was the last online CPU on its NUMA node, drain that
node's slot across all CPUs so no skbs deferred from that node remain
stranded on idle remote CPUs (or if the node itself is subsequently
offlined).
Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and
whether the caller migrated CPUs after llist_add(), flushing the node
list if so, to close the preemption TOCTOU race against CPU/node
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
fsl/fman: Fix clk reference leak in read_dts_node()
of_clk_get() returns a clock with its reference count incremented, but
read_dts_node() only uses it to read the rate and never calls clk_put().
The clock is not stored anywhere, so the reference cannot be released
later either.
Release the clock once its rate has been read, which also covers the
error path taken when the rate is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots
LOLLM noticed that the inode btree root formatting methods copy too many
bytes -- there's only one set of keys in node blocks, not two. This
causes memory corruption of whatever's beyond the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't let memory failures leak blocks and kill repairs
LOLLM complains that a memory allocation failure in
xrep_newbt_add_blocks results in online repair leaking blocks that were
previously allocated to write a new btree, but the problem is worse than
that -- a limitation of the codebase is that the callers cannot undo the
transaction /and/ return the error -- either you undo all changes and
commit the transaction, or you error out and the filesystem goes down.
However, the new btree space reservation object isn't that big (~48
bytes). Let's just do a NOFAIL allocation and the problem goes away. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure
In kvmppc_svm_page_in(), if uv_page_in() fails after
kvmppc_uvmem_get_page() has succeeded, the secure device page is never
released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap,
allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as
KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets
refcount=1 and locks the page. The subsequent goto out_finalize skips
the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the
page, and none of those resources are ever reclaimed.
Each occurrence permanently consumes one entry from the firmware-bounded
secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN
marked as secure — making it unusable for the lifetime of the VM.
The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out()
failure correctly with unlock_page(dpage); __free_page(dpage). Apply
the same pattern here: unlock_page() followed by put_page(), which
chains through free_zone_device_folio() into kvmppc_uvmem_folio_free()
to clear the bitmap bit, free pvt, and reset the GFN state.
Reachable whenever uv_page_in() returns an error (e.g. UV pool
exhaustion) on any POWER9/10 + Ultravisor/PEF system. |
| A vulnerability was determined in DeepPavlov up to 1.7.0. This affects the function MultiTaskPipelinePreprocessor.__init__ of the file deeppavlov/models/preprocessors/multitask_preprocessor.py. This manipulation of the argument preprocessor causes code injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| The Simple Membership plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'country' parameter in all versions up to, and including, 4.8.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Unauthenticated attackers may also exploit this vulnerability when the plugin's Enable Free Membership feature is turned on, as it permits anonymous front-end registration and profile submission. |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected DOM-Based Cross-Site Scripting via the '<attacker-chosen query var name matching the preset's query_var setting>' parameter in all versions up to, and including, 3.6.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This is only exploitable on pages embedding a form that has a text field configured with a query_var Dynamic Preset and a data-jfb-macro or JFB_FIELD:: macro reference targeting that field, both of which are standard, documented plugin features. |
| A weakness has been identified in itsourcecode Online Cake Ordering System 1.0. This issue affects some unknown processing of the file confirm.php. This manipulation of the argument cancel causes sql injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| The Avada | Website Builder For WordPress & WooCommerce theme for WordPress is vulnerable to Stored Cross-Site Scripting via the user profile 'Author Page' social link contact-method fields (author_facebook, author_twitter, author_linkedin, author_dribble, author_whatsapp, author_email) in versions up to, and including, 7.16.1. Avada registers these fields through the user_contactmethods filter and, on the author archive, emits them inside an anchor href using only esc_attr() in Fusion_Social_Icon::get_markup(), which escapes HTML metacharacters but does not reject dangerous URL schemes such as javascript:. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses their author page and clicks the injected social icon (a click is required, and the site must have 'Open Social Icons in a New Window' set to Off so the browser doesn't block the javascript: URL from opening in a new tab). |
| A vulnerability has been found in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. Affected by this vulnerability is the function html of the file dmAdminPlugin/web/js/dmAdminCtrl.js of the component Version Check Service. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| phpMyFAQ 3.2.1 before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a stored cross-site scripting vulnerability that allows authenticated content authors to inject JavaScript by embedding iframes with data:text/html sources in FAQ or News content. Attackers can bypass the hostless media-host allowlist in FaqHelper::cleanUpContent(), which is rendered via Twig's raw filter, to run phishing interfaces or top-frame redirects for viewers. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to DOM-Based Cross-Site Scripting via the 'redirect_url' parameter in versions up to, and including, 4.0.8 This is due to insufficient input validation in the Topbar component's back button handler. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute in the victim's browser whenever the victim accesses a page that includes the malicious payload. |
| VNote is a note-taking platform. Prior to 4.3.0, SessionConfig::ExternalProgram::fetchCommand wraps a note path in double quotes and substitutes it into a command string that QProcess::start(const QString&) reparses into arguments through ProcessUtils::startDetached. The automatic path in src/controllers/viewareacontroller.cpp and the Open With path in src/controllers/notebooknodecontroller.cpp both reach this sink. On Linux and macOS, an attacker-controlled double quote in a POSIX note filename can terminate the quoted path and add arguments to the victim's configured external program. If the configured program supports an argument that executes commands, such as the vim or gvim -c option, the injected arguments can execute arbitrary commands as the user. This issue is fixed in version 4.3.0. |
| Frappe ERPNext before 15.110.0 and 16.x before 16.21.0 contains a stored cross-site scripting vulnerability caused by record names being rendered without escaping. Attackers with write access to item master data can store malicious script in a record name that executes in the browser of any operator who opens the affected page. |
| Frappe ERPNext before 15.120.0 and 16.x before 16.33.0 contains a stored cross-site scripting vulnerability in a report view that interpolates stored record names into markup without escaping. Authenticated users able to create records can store crafted record names that execute script in the session of any user who later opens the report. |
| Frappe ERPNext before 15.112.0 and 16.x before 16.23.0 contains a stored cross-site scripting vulnerability because a tool view interpolates stored record names into markup without escaping. An authenticated user able to create such records can give them malicious names, executing script in the session of any user who later opens that tool. |
| Frappe before 14.99.10 and 15.x before 15.91.1 contains a stored cross-site scripting vulnerability in the leaderboard page because user names are rendered without proper neutralization. Authenticated attackers can set a crafted user name that executes arbitrary JavaScript in the browsers of other users who view the leaderboard. |
