| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly handle end of VA space TLBI invalidation
Our TLB invalidation by VA code is based on comparing two ranges,
one defined by the TLB, and one defined by the TLBI instruction.
Each range is defined by a start and a size. However, the way the
comparison is done doesn't account for address rollover, as it
compares an address with (base + size). This works nicely until
this expression represent the last page/block in the TTBR1 VA space,
as the result is a big fat 0. And a failed TLB invalidation.
Rewrite the comparison in a way that is immune to the address
rollover (making the end address inclusive instead of exclusive),
and move this into a common helper that is used by both VA and IPA
invalidations, as suggested by Hyunwoo Kim (although the IPA version
didn't suffer from this particular problem, obviously). |
| In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.
Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| oRPC is an tool that helps build APIs that are end-to-end type-safe and adhere to OpenAPI standards. Prior to 1.14.8, the @orpc/server CORS plugin in packages/server/src/plugins/cors.ts copies a client's incoming Vary request header into the response instead of controlling Vary as a response-only header and using Origin for request-origin variation. In deployments behind a shared cache, CDN, or reverse proxy that keys responses using Vary, a client can inject arbitrary variation values, pollute cache keys, and cause inconsistent CORS enforcement for other clients. Default non-cached configurations have no established direct confidentiality, integrity, or availability impact. This issue is fixed in version 1.14.8. |
| A vulnerability was determined in Freedesktop Poppler 26.07.0. This affects the function FoFiTrueType::mapCodeToGID of the file fofi/FoFiTrueType.cc. Executing a manipulation of the argument segCnt can lead to integer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called ed2a5538cf0a8d3ff908191eda9b73f91a5f952a. It is advisable to implement a patch to correct this issue. |
| Canva Desktop before v1.125.0 performed double decoding in the deeplink handler. A threat actor could cause the application to load arbitrary same-origin content under the user’s session. |
| A vulnerability was detected in Freedesktop Poppler 26.07.0. This issue affects the function SampledFunction::SampledFunction of the file poppler/Function.cc of the component SampledFunction. The manipulation of the argument BitsPerSample results in integer overflow. The attack may be performed from remote. The exploit is now public and may be used. The project was informed of the problem early through a bug report but has not responded yet. |
| Nodemailer before 9.1.0 contains a quadratic time complexity vulnerability in the addressparser component that allows remote attackers to cause denial of service by supplying a crafted comma-separated address list. Attackers can send a single email with a large number of addresses to block the Node.js event loop for extended periods, consuming 100% CPU and freezing the process. |
| vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary. The extraction filters in lib/setup-sandbox.js and the cross-realm symbol checks and write traps in lib/bridge.js use a fixed list of known dangerous registered symbols that omits nodejs.stream.disturbed and nodejs.stream.errored, which are exposed on host WebStream prototypes on newer Node.js releases (validated on Node.js v25.8.0). When the embedder exposes a host WebStream object and the host stream/web module to the sandbox, sandbox code can obtain the real host symbols via Object.getOwnPropertySymbols(streamWeb.ReadableStream.prototype) and use them as write keys on host stream objects, corrupting host-visible stream state — for example making stream.Readable.isDisturbed() return false for an already-consumed stream. This can bypass host logic that relies on Node's public stream-state helpers to enforce one-shot body consumption, reject errored streams, or decide whether a stream is safe to hand to another component. It is not a host code-execution primitive in the reported proof of vulnerability. This is an incomplete fix for the earlier nodejs.* symbol filtering issue. Fixed in vm2 3.11.7. |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. |
| A flaw was found in EAP's jboss-remoting. A remote unauthenticated attacker who can reach :8080 (or :9990, or :4447) and complete an Upgrade: jboss-remoting handshake can cause OOM errors that degrade requests server-wide, leading to denial of service. |
| Out-of-bounds read in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| vm2 before 3.11.7 contains a module allowlist bypass vulnerability in isPathAllowedForModule that uses raw string prefix matching instead of boundary-anchored comparison. Attackers can reach non-allowlisted packages sharing a prefix with allowlisted modules by performing relative requires from allowlisted packages when transitive loading is disabled. |
| Heap-based buffer overflow in Windows Internet Key Exchange (IKE) Protocol allows an unauthorized attacker to deny service over a network. |
| An integer overflow was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted font may result in the disclosure of process memory. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Connecting to a malicious SMB server may cause unexpected system termination or corrupt kernel memory. |
| Memory Corruption when validating large data buffers from external sources using addition to check buffer length. |
| A vulnerability in Cisco Adaptive Security Device Manager (ASDM) single sign-on (SSO) handler for Cisco Secure FMC Software could allow an unauthenticated, remote attacker to log in as the Cisco ASDM administrator user.
This vulnerability is due to improper management of the Cisco ASDM SSO token. An attacker could exploit this vulnerability by performing session token forgery techniques. A successful exploit could allow the attacker to log in as the administrator user and, by repeating this action, keep legitimate administrators locked out of the ASDM indefinitely. |
