Export limit exceeded: 409317 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409317 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89718 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in writeback_store() Patch series "zram: fix stale scan bounds after reinitialization". Both writeback_store() and read_block_state() derive their table scan bounds from zram->disksize before acquiring dev_lock. If the device is reset and reinitialized with a smaller disksize between that read and lock acquisition, the bound can describe the old table while the scan operates on the new one. This can lead to out-of-bounds slot accesses. Move both bound calculations under dev_lock so each bound remains consistent with the table throughout its scan. Keep the fixes separate because the affected interfaces originate from different commits and can be backported independently. This patch (of 2): writeback_store() calculates the table scan bounds before taking dev_lock. A reset followed by reconfiguration with a smaller disksize can therefore replace zram->table while writeback_store() is waiting for the lock. Once it acquires the lock, it sees an initialized device but scans the new table using the old upper bound, resulting in an out-of-bounds access. Calculate the number of pages while holding dev_lock so the scan bound matches the table protected by the lock. | ||||
| CVE-2026-89709 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd, nfsd: RCU-protect nlmsvc_ops dispatch nlmsvc_ops is published by nfsd_lockd_init() and cleared by nfsd_lockd_shutdown() with plain stores, while lockd dereferences it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's .text, so a stale load after rmmod nfsd results in either a NULL deref or a module-text use-after-free. Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module *owner field to nlmsvc_binding and pin the module across indirect calls with try_module_get/module_put. When the binding is torn down, fall back to fput() to avoid leaking struct file references. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89642 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89601 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata(). | ||||
| CVE-2026-89568 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kho: fix size calculation in kho_preserved_memory_reserve() kho_preserved_memory_reserve() calculates the size of a preservation by doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it can only be shifted by 31. That is, it will only work for preservations up to 2 GiB. Larger preservations will trigger undefined behaviour. While preservations larger than 2 GiB can't be obtained via folios currently, they can be obtained via kho_preserve_pages(). For example, memblock reserve_mem uses kho_preserve_pages(). Reservations larger than 2 GiB are valid and will trigger this bug if properly aligned. Fix it by using 1UL for shifting. | ||||
| CVE-2026-89534 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE, it creates a replacement listener cm_id and returns 1, telling the CM core to destroy the old one. If the replacement allocation fails, sc_cm_id still points at the old cm_id that the CM core is about to destroy. Any subsequent dereference of sc_cm_id -- such as svc_rdma_detach()'s rdma_disconnect() call -- is a use-after-free. NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s rdma_disconnect() call against NULL so that the listener can be torn down safely when the server shuts down. | ||||
| CVE-2026-89527 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Use svc_xprt_put to free listener on create failure svc_rdma_create() calls kfree(cma_xprt) when svc_rdma_create_listen_id() fails. svc_xprt_init() has already acquired a net namespace reference via get_net_track(); kfree bypasses svc_xprt_free() which releases it. Replace the kfree() with svc_xprt_put() so the kref_init birth reference drops to zero and svc_xprt_free() dispatches svc_rdma_free() to clean up properly. sc_cm_id is still NULL at that point; the preceding patch added the necessary NULL guard in svc_rdma_free(). svc_xprt_free() also drops the module reference via module_put(), but the caller _svc_xprt_create() does the same on xpo_create failure, double-putting the single try_module_get() it acquired. Take a compensating __module_get() before the svc_xprt_put() to keep the count balanced, matching the convention in svc_rdma_accept()'s error path. | ||||
| CVE-2026-89513 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events. | ||||
| CVE-2026-80884 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntb: Store original DMA address for future release The DMA API requires that dma_free_attrs receive the exact dma_handle originally returned by the allocation function. Do not modify it. | ||||
| CVE-2026-80866 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(), allowing the thread to sleep properly until the work queue count reaches zero. Accordingly, update cleanup_bearer() to use atomic_dec_and_test() and wake_up_var() to wake up the waiter when the count drops to zero. This uses the global wait queue hash table, avoiding the need to bloat struct tipc_net with a wait_queue_head_t. The atomic_dec_and_test() provides the necessary memory barrier to ensure the wakeup is not missed. | ||||
| CVE-2026-80786 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves. | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-80705 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) | ||||
| CVE-2026-80698 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. | ||||
| CVE-2026-80655 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events. | ||||
| CVE-2026-80631 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject compressed segment that overflows the compressed input lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. | ||||
| CVE-2026-80546 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve CCA CPRB length and overflow checks The xcrb_msg_to_type6cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Integer overflow after CEIL4 alignment: Signed int variables could overflow during 4-byte boundary alignment, causing undersized buffer allocations or incorrect bounds checking. 2. Missing minimum size validation: The CPRBX structure is copied from userspace without verifying sufficient buffer length. Undersized buffers cause uninitialized memory access when reading structure fields like cprbx.cprb_len and cprbx.domain. 3. Arithmetic overflow in sum calculations: Adding control block and data block sizes could overflow, bypassing size checks and enabling buffer overflows. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, validating minimum control block size before copying from userspace, and detecting sum calculation overflows. | ||||