Export limit exceeded: 16877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93067 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count of 255 makes the read run to 256 bytes and overruns both. The controller should never report more than it was asked to transfer, so this is defense in depth rather than a live hole. The reported count is only lightly trusted, and the check is cheap. Clamp it back to the request, the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). | ||||
| CVE-2026-93078 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Set Features output buffer smaller than the header cxlctl_set_feature() sizes its output buffer from the user's fwctl_rpc.out_len but never checks it is large enough to hold even the fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent rpc_out->size = 0 then writes through the poison pointer. Reject requests whose output buffer can't hold the response header, before allocating. The Set Feature reply carries no payload, so the header is all that is required. | ||||
| CVE-2026-93138 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the bpf_verifier_lock, but publishes the result through a plain store and re-checks it through a plain lockless load. Nothing orders the stores initializing the struct btf inside btf_parse_vmlinux() against the store publishing the pointer: On a weakly ordered arch, a concurrent first-time caller taking the lockless fast path could in principle observe the pointer before the parsed contents are visible. The mutex_unlock() does not help such a reader given it only synchronizes with a later acquisition of the same lock. Thus, publish the pointer with smp_store_release() and read it on the fast path with smp_load_acquire(). Acquire semantics are needed rather than a dependency-ordered READ_ONCE(): btf_parse_vmlinux() also populates globals outside the returned object (e.g. bpf_ctx_convert.t). An address dependency would only order accesses performed through the pointer and not cover other globals. | ||||
| CVE-2026-93194 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Release core resources Core resources such as the DisplayPort AUX channel get initialized and registered during dw_dp_bind(), but are never unregistered, which may lead to memory leaks and/or use-after-free: [ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0 [ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658 [ 224.662612] [ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT [ 224.662759] Hardware name: Radxa ROCK 5B (DT) [ 224.662762] Call trace: [ 224.662764] show_stack+0x20/0x38 (C) [ 224.662772] dump_stack_lvl+0x6c/0x98 [ 224.662777] print_report+0x160/0x4b8 [ 224.662783] kasan_report+0xb4/0xe0 [ 224.662790] __asan_report_load8_noabort+0x20/0x30 [ 224.662796] device_is_dependent+0xe0/0x2b0 [ 224.662802] device_is_dependent+0x108/0x2b0 [ 224.662808] device_link_add+0x1f8/0x10b0 [ 224.662813] devm_of_phy_get_by_index+0x120/0x200 [ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp] [ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm] [ 224.662864] component_bind_all+0x3a8/0x720 [ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm] [ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838 [ 224.662904] component_master_add_with_match+0x1f4/0x230 [ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm] [ 224.662939] platform_probe+0xe8/0x168 [ 224.662945] really_probe+0x340/0x828 [ 224.662950] __driver_probe_device+0x2e0/0x350 [ 224.662954] driver_probe_device+0x80/0x140 [ 224.662959] __driver_attach+0x398/0x460 [ 224.662964] bus_for_each_dev+0xe0/0x198 [ 224.662968] driver_attach+0x50/0x68 [ 224.662972] bus_add_driver+0x2a0/0x4c0 [ 224.662977] driver_register+0x294/0x360 [ 224.662982] __platform_driver_register+0x7c/0x98 [ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm] Since a previous commit exported dw_dp_unbind() function in DW DP core library to take care of the necessary cleanup, use this in the component's unbind() callback, as well as in its bind() error path. | ||||
| CVE-2026-75031 | 2026-09-19 | 9.8 Critical | ||
| In the interchange/interchange project, a critical remote code execution (RCE) vulnerability was found in the “quick question” admin feature. In default installations arbitrary Perl code can be injected and executed server-side by unauthenticated users. The Perl code normally runs within a Safe container which limits the scope of what it can do, unless the non-default AllowGlobal directive is configured for the catalog being accessed.CTOR] | ||||
| CVE-2026-61700 | 1 Mariadb | 1 Connector-j | 2026-09-19 | 3.7 Low |
| MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, ClientMessage.readPacket processes a server-initiated LOCAL INFILE protocol packet 0xfb without enforcing allowLocalInfile=false. When an application sends a LOAD DATA LOCAL INFILE COM_QUERY, a rogue or man-in-the-middle server can echo the same filename and cause the connector to transmit that file despite the disabled option. The server cannot redirect the request to an arbitrary path and can receive only the exact file already selected by the application, so exploitation requires an application that actively loads sensitive data over an untrusted connection. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9. | ||||
| CVE-2026-92619 | 2 Wordpress, Wpdevelop | 2 Wordpress, Booking Calendar | 2026-09-19 | 7.2 High |
| The Booking Calendar plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 11.8.2 via the `wpbc_ajax_option_save` AJAX action. The vulnerability exists because the `handle_ajax_save()` function applies per-option safeguards only to names explicitly registered via `register_option_policy()`, causing `get_option_policy()` to return an empty policy — bypassing all can_save, force_mode, and allowed_keys checks — for any unregistered option name, including core WordPress options, while an attacker-controlled `data_name` parameter passes through `sanitize_key()` and is written directly to `update_option()` without restriction. This makes it possible for authenticated attackers with Editor-level access and above to escalate their privileges to Administrator by writing core WordPress options such as `default_role=administrator` and `users_can_register=1`, then self-registering a new Administrator account. The nonce check does not meaningfully restrict this attack, as both the nonce value and nonce action are attacker-supplied POST parameters, and a valid nonce is trivially obtainable via `admin-ajax.php?action=rest-nonce`. | ||||
| CVE-2026-5090 | 1 Toddr | 1 Template::plugin::html | 2026-09-19 | 6.1 Medium |
| Template::Plugin::HTML versions before 3.103 for Perl allows HTML and JavaScript to be injected. The html_filter function did not escape single quotes. HTML attributes inside of single quotes could be have code injected. For example, the variable "var" in <a id='ref' title='[% var | html %]'> would not be properly escaped. An attacker could insert some limited HTML and JavaScript, for example, var = " ' onclick='while (true) { alert(1) }'" Note that arbitrary HTML and JavaScript would be difficult to inject, because angle brackets, ampersands and double-quotes would still be escaped. | ||||
| CVE-2026-84048 | 1 Joomgalleryfriends.net | 1 Joomgallery Extension For Joomla | 2026-09-19 | N/A |
| Joomla Extension - joomgalleryfriends.net - Unauthenticated arbitrary file upload via the TUS endpoint in JoomGallery < 4.4.2 - The TUS endpoint allows arbitrary file uploads, however neither file name nor file extension are under attacker control. Code execution requires non-standard server configuration. | ||||
| CVE-2026-93987 | 1 Rclone | 1 Rclone | 2026-09-19 | 3.4 Low |
| rclone versions 1.56.0 through 1.75.0 contain a path traversal vulnerability in the `rclone serve docker` volume plugin. newVolume() in cmd/serve/docker/volume.go computes a volume's mountpoint as filepath.Join(drv.root, name) from the attacker-supplied `name` field of a Docker VolumeDriver.Create request without verifying that the result stays within drv.root (default /var/lib/docker-volumes/rclone), and checkMountpoint() then creates that directory with file.MkdirAll before mounting. A volume name containing enough `..` components (e.g. "../../../../../../etc") therefore resolves outside the base directory, allowing anyone able to submit a VolumeDriver.Create request to the plugin socket — normally the Docker daemon, or a workload that can request named volumes in a multi-tenant orchestration setup — to make the privileged rclone plugin process create a directory and mount a remote filesystem specified in the same request at an arbitrary host path, shadowing or disrupting system directories. The advisory notes Volume.restoreState() had the same missing validation when reloading persisted volume state. Fixed in 1.75.1. | ||||
| CVE-2026-93986 | 1 Rclone | 1 Rclone | 2026-09-19 | 3.1 Low |
| rclone before 1.75.1 fails to confine names from server and third-party listing responses to the listed directory, allowing path traversal sequences in object names. Attackers can craft special names containing forward slashes and parent directory references to potentially write outside the destination root, though downstream protections in the local backend currently block actual file escape. | ||||
| CVE-2026-93985 | 1 Openpanel | 1 Openpanel | 2026-09-19 | 9.9 Critical |
| OpenPanel js-runtime through commit bad75bdd contains a sandbox escape vulnerability in the JavaScript webhook template validator that fails to block computed member access to constructor chains. Attackers with project write access can create webhook templates using computed property notation to access Function constructor and execute arbitrary code in the worker process. | ||||
| CVE-2026-93984 | 1 Openpanel | 1 Openpanel | 2026-09-19 | 5.3 Medium |
| OpenPanel tracking API through commit bad75bddc74d12d36cfb843f4531d3b830a8d994 fails to verify client secret cryptographic hash before authorizing revenue events and bot filtering. Attackers with only a public client ID can supply arbitrary dummy secrets to inject forged revenue metrics and bypass bot detection filters. | ||||
| CVE-2026-93983 | 1 Openpanel | 1 Openpanel | 2026-09-19 | 5 Medium |
| OpenPanel through commit bad75bdd fails to escape property keys in ClickHouse SQL queries, allowing authenticated users to inject boolean SQL terms. Attackers can supply crafted filter names to bypass project isolation and access metrics from other projects. | ||||
| CVE-2026-93982 | 1 Openpanel | 1 Openpanel | 2026-09-19 | 3.3 Low |
| OpenPanel through commit bad75bdd writes Model Context Protocol authentication tokens from URL query parameters to plaintext application logs without redaction. Attackers with access to application stdout or centralized logging systems can capture base64-encoded credentials to replay MCP requests and access project analytics. | ||||
| CVE-2026-93981 | 1 Hono | 1 Hono | 2026-09-19 | 4.7 Medium |
| hono before 4.13.7 fails to HTML-escape plain strings rendered by hono/jsx as a child or fallback of Suspense, as a string child of ErrorBoundary alongside an asynchronous sibling, as the single child of a Context.Provider, or as the root value passed to renderToString() or renderToReadableStream() from hono/jsx/dom/server. These paths stringify their input and treat the result as already-escaped markup, so an attacker who controls such a string during server-side rendering can inject arbitrary HTML and execute script under the application's origin. | ||||
| CVE-2026-92622 | 2 Wordpress, Wpchill | 2 Wordpress, Strong Testimonials | 2026-09-19 | 6.4 Medium |
| The Strong Testimonials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'lightbox_class' Shortcode Attribute in all versions up to, and including, 3.3.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that the targeted testimonial view has at least one published testimonial with a featured image and the lightbox wrapper enabled, as the vulnerable code path is only reached when a thumbnail is rendered. | ||||
| CVE-2026-89881 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-92802 | 2 Kan, Kanbn | 2 Kan, Kan | 2026-09-19 | 4.3 Medium |
| kan through 0.6.0 fails to properly validate board creation permissions in the GitHub project import endpoint, allowing guests to create boards despite lacking board:create permission. Attackers can bypass authorization checks by using the importProjects mutation to create boards while remaining blocked on direct creation paths. | ||||
| CVE-2026-92484 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix use-after-free in find_pos_and_ways() error path The error path releases its reference to a switch decoder before logging an error that includes the decoder name. If the released reference is the last one, the decoder can be freed before the error message accesses its name. Drop the reference after the error is reported. | ||||