| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: ipu6: Do not free aux device pdata after init
ipu6_bus_initialize_device() stores the isys/psys pdata pointer in
struct ipu6_bus_device and initializes the auxiliary device. After that
point, error unwinding must drop the auxiliary device reference and let
ipu6_bus_release() free both the bus device and adev->pdata.
The isys and psys init paths already call put_device() when MMU
initialization fails, and ipu6_bus_add_device() calls
auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths
therefore run the bus release callback. The extra kfree(pdata) in the
callers can release the same object a second time.
Remove the manual pdata frees after the auxiliary device has been
initialized.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: use __va(phys) for kaddr in direct_access
Use __va(phys) instead of virt_addr + linear_offset for the kaddr
return in __fsdev_dax_direct_access(). The previous code added a
device-linear byte offset to virt_addr (which is __va of ranges[0]),
but for multi-range devices with physical gaps between ranges, this
linear arithmetic crosses the gap and produces a wrong kernel virtual
address. Using __va(phys) where phys comes from dax_pgoff_to_phys()
is correct for any range layout because the direct map translates
each physical address independently.
This leaves dev_dax->virt_addr write-only, so remove the field
(suggested by Dave Jiang). |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear pgmap ops and owner on unbind
fsdev_dax_probe() sets pgmap->ops = &fsdev_pagemap_ops and
pgmap->owner = dev_dax, but nothing ever clears them. For a dynamic
device the pgmap is devm-allocated and freed on unbind, so this is
harmless. For a static device the pgmap is the shared, long-lived one
owned by the dax bus (kill_dev_dax() only NULLs dev_dax->pgmap for the
non-static case), and device.c's probe sets only pgmap->type, never
clearing ops/owner.
So after fsdev unbinds a static device the stale fsdev_pagemap_ops
survives on the shared pgmap. If the device is then rebound to
device_dax (MEMORY_DEVICE_GENERIC, which installs no ->memory_failure),
or the fsdev_dax module is unloaded, a subsequent memory_failure on that
pgmap dispatches through the stale -- and possibly freed -- handler.
Register a devm action that clears pgmap->ops and pgmap->owner on unbind,
symmetric with setting them at probe, so the pgmap carries no fsdev state
once fsdev is detached. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Clamp Get Feature output size to the remaining buffer
cxl_get_feature() reads a feature in a loop but passes a fixed size_out
as the output capacity every iteration. On the last partial iteration
the buffer has less room left, so a device that returns more than asked
can overflow feat_out.
Use the per-iter size data_to_rd_size, which already tracks the
remaining room, as the output capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind TX receiver mailbox setup failure
mailbox_chan_setup() can request an additional unidirectional TX
receiver channel after successfully acquiring the primary channel. If
that second request fails, the function returns immediately and leaves
the primary channel allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Clean up channels on setup failure
scmi_channels_setup() can fail after the common BASE channel or earlier
protocol channels have already been registered in the TX/RX IDRs.
Route this failure through the existing channel cleanup label so the
transport channels, transport devices and IDR state created before the
failure are released before the probe error path frees the SCMI instance
ID. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Quiesce notifications before teardown
scmi_notification_exit() clears and releases the notification instance,
but transport callbacks can still deliver incoming notifications until
the TX/RX channels are freed. During remove, an RX interrupt in that
window can enter scmi_notify() while notification state is being torn
down and then dereference freed memory. The same ordering exists on the
probe error path after notification initialization.
The notification late-init worker has a separate lifetime issue: protocol
event registration queues ni->init_work on the system workqueue, so
destroying ni->notify_wq does not drain that work. If the devres group is
released while init_work is still pending or running, the late-init worker
can dereference the freed notification instance.
Quiesce the notification core before TX/RX channels are torn down, then
clean up the channels before releasing the notification core resources.
Use disable_work_sync() so future late-init queueing is rejected and any
already queued or running late-init work has completed before channel
teardown starts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback
ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via
ath12k_peer_create(), which finishes by calling
ath12k_dp_link_peer_assign() to publish the dp_link_peer in the
dp_hw->dp_peers[peerid_index] RCU table, in the dp_peer's
link_peers[] array, and in the per-addr rhashtable.
If a step after ath12k_peer_create() fails the function jumps to
err_peer_del, which open-codes a WMI peer_delete and waits for the
unmap / delete_resp events. The wait_for_peer_delete_done() path
relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer
when the unmap arrives, but err_peer_del never calls
ath12k_dp_link_peer_unassign() first. The published references in
the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are
left pointing at the dp_link_peer that unmap_event then frees,
producing dangling pointers and use-after-free on subsequent
lookups.
Replace the open-coded sequence with a call to ath12k_peer_delete(),
which already does ath12k_dp_link_peer_unassign() before sending the
WMI command. This drops the published references before the
dp_link_peer is freed, in the same order as the normal teardown path
in ath12k_mac_remove_link_interface().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture frees the rdt_l3_mon_domain that contains the worker's
work_struct. When the worker unblocks, the container_of() it performs on the
embedded work pointer dereferences freed memory.
Drop cpus_read_lock() from the workers and instead drain pending and in-flight
work synchronously before the architecture can free the domain. Since
architecture offlines the domain under cpus_write_lock() after it has been
unlinked from the RCU list and a grace period has elapsed, no new work can be
scheduled. The cancel only needs to wait out existing work. Drop
rdtgroup_mutex during CPU offline around cancel_delayed_work_sync() so that
a worker waiting on the mutex can complete before re-pinning the work on
a different CPU.
When offlining a CPU the architecture may iterate over resources in any order.
For example, the MBA control domain may be offlined before or after
a corresponding L3 monitor domain. Ensure that resctrl fs cancels the workers
no matter what order the architecture offlines the domains. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Add refcounting to user ring MRs
Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings
by bumping the MR's refcount upon association. |
| In the Linux kernel, the following vulnerability has been resolved:
csky: Fix a4/a5 restoration in syscall trace path
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes six arguments. A small
PTRACE_SYSCALL reproducer opens a file and maps one page with:
mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0)
Before the fix, the traced child fails the mmap and exits with 12.
After the fix, the mapping succeeds and the child exits with 0.
Fix the trace path by loading a4/a5 from pt_regs before changing sp.
Tested on: ck860f, linux-4.19.15, C-SKY abiv2 |
| In the Linux kernel, the following vulnerability has been resolved:
leds: lp5860: Fix a potential double-unlock
In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked
mutex is unlocked another time.
Slightly rework how the lock is taken/released to avoid this potential
double unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
We miss a failed allocation check for pgdat->per_cpu_nodestats, which
results in a NULL deref when we offset into the per-cpu area.
Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing
at boot_nodestats so a later online can retry the allocation.
hotadd_init_pgdat() returns NULL on failure, which __try_online_node()
already maps to -ENOMEM.
On failure nothing needs to be unwound:
- the node is never marked online
- per_cpu_nodestats is left pointing at boot_nodestats
- __add_memory_resource() cleans up pending memblock resources
- later online attempts retry the per_cpu_nodestats allocation |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
crash_dump: release keyring reference at the correct time
restore_dm_crypt_keys_to_thread_keyring() gets a reference to the user
keyring before restoring the saved dm-crypt keys.
The same keyring reference is then passed to add_key_to_keyring() for each
saved key, but add_key_to_keyring() drops that reference on every call.
This is only balanced when exactly one key is restored. With multiple
keys, the keyring reference is dropped too many times and may trigger a
refcount underflow or use-after-free.
When more than five keys are restored, a refcount underflow/use-after-free
warning can be triggered.
The early error paths after lookup_user_key() also return without dropping
the keyring reference.
Keep ownership of the keyring reference in
restore_dm_crypt_keys_to_thread_keyring(), drop it once on all exit paths,
and make add_key_to_keyring() only use the reference without consuming it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Drain RCU callbacks during module teardown
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK
With the introduction of sync_state support in the clk and pmdomain
subsystems, the following warning happens when the unused clocks are
shutdown in camcc-sc8280xp:
[ 15.408367] titan_top_gdsc status stuck at 'on'
[ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14
[ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common
snd_soc_sc8280xp soundwire_qcom snd_soc_wcd_mbhc snd_soc_qcom_sdw slimbus snd_soc_qcom_common regmap_sdw btqca btrtl qcom_camss soundwire_bus btbcm btintel snd_soc_sdca snd_soc_lpass_wsa_macro
bluetooth snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_rx_macro snd_soc_hdmi_codec snd_soc_lpass_macro_common videobuf2_dma_sg ov5675 v4l2_fwnode videobuf2_memops
qcom_spmi_adc5 snd_soc_core qcom_spmi_adc_tm5 videobuf2_v4l2 snd_seq snd_seq_device videobuf2_common v4l2_async qcom_vadc_common qcom_spmi_temp_alarm pm8941_pwrkey industrialio videodev
snd_compress rfkill ac97_bus snd_pcm_dmaengine qcom_tsens mc qcom_edac snd_pcm pci_pwrctrl_pwrseq qcom_cpufreq_hw snd_timer snd qcomtee soundcore tee leds_gpio joydev binfmt_misc zram
lz4hc_compress governor_simpleondemand panel_edp msm xhci_plat_hcd nvme nvme_core dwc3 qcom_pm8008_regulator
[ 15.408688] ucsi_glink nvme_keyring nvme_auth pmic_glink_altmode udc_core typec_ucsi aux_hpd_bridge qcom_battmgr ulpi ubwc_config socinfo ocmem drm_gpuvm qcom_q6v5_pas drm_exec
qcom_pil_info leds_qcom_lpg gpu_sched led_class_multicolor rtc_pm8xxx qcom_pbs qcom_common drm_display_helper qcom_pon qcom_glink_smem qcom_glink ghash_ce pwrseq_qcom_wcn gpio_sbu_mux
qcom_stats phy_qcom_qmp_combo qcom_q6v5 gf128mul cec dispcc_sc8280xp phy_qcom_edp camcc_sc8280xp i2c_qcom_cci qcom_sysmon drm_dp_aux_bus mdt_loader aux_bridge qcom_pm8008 i2c_hid_of_elan
dwc3_qcom_legacy llcc_qcom icc_bwmon gpi typec qcom_refgen_regulator phy_qcom_qmp_usb nvmem_qfprom qcom_ipcc phy_qcom_snps_femto_v2 gpucc_sc8280xp pinctrl_sc8280xp_lpass_lpi qcom_hwspinlock
pinctrl_lpass_lpi lpasscc_sc8280xp qrtr qcom_aoss pmic_glink pdr_interface phy_qcom_qmp_pcie qcom_smd qcom_pdr_msg icc_osm_l3 qcom_wdt qmi_helpers qcom_rng smp2p rpmsg_core gpio_keys pwm_bl
smem hid_multitouch fuse i2c_dev
[ 15.408928] CPU: 2 UID: 0 PID: 14 Comm: kworker/u32:1 Not tainted 7.1.0+ #2 PREEMPT(lazy)
[ 15.408937] Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET88W (1.60 ) 03/14/2024
[ 15.408942] Workqueue: pm pm_runtime_work
[ 15.408959] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 15.408967] pc : gdsc_toggle_logic+0x14c/0x160
[ 15.408978] lr : gdsc_toggle_logic+0x14c/0x160
[ 15.408987] sp : ffff8000800f3b40
[ 15.408991] x29: ffff8000800f3b40 x28: 0000000000000000 x27: 0000000000000000
[ 15.409003] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 15.409014] x23: 0000000000000000 x22: 0000000000000001 x21: ffffa33f298fca88
[ 15.409024] x20: 0000000000000000 x19: ffffa33f298fc5b0 x18: 00cd15db75dacefd
[ 15.409035] x17: 000000040044ffff x16: ffffa33f3b1a3d88 x15: 726f776b80000002
[ 15.409045] x14: ffffffffffffffff x13: 0000000000000028 x12: 0101010101010101
[ 15.409056] x11: 7f7f7f7f7f7f7f7f x10: fefeff3039313274 x9 : ffffa33f3a5edafc
[ 15.409067] x8 : ffff8000800f3780 x7 : 0000000000000001 x6 : 0000000000000001
[ 15.409078] x5 : ffff000bf3ca1288 x4 : 0000000000000000 x3 : ffff5cccb6a3f000
[ 15.409088] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000080ae0000
[ 15.409098] Call trace:
[ 15.409103] gdsc_toggle_logic+0x14c/0x160 (P)
[ 15.409115] gdsc_disable+0x4c/0x190
[ 15.409126] _genp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations. |
