| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread.
An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing.
Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service.
The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated. |
| Missing authorization in the Sieve notify action (6.2.22 through 6.3.6) and in the mail-rule Reply action (6.0.0 through 6.3.6) of Progressive Robot hMailServer allows an authenticated user to send mail through the server as any address. A Sieve notify sends a notification message, and its :from tag names the sender; the server set the notification's From header to that :from as the script wrote it, without checking that the address belongs to the account - the check that the Sieve vacation action applies to its own :from, and that the server applies to the sender of mail queued over COM or sent from the webmail. An account that can store a Sieve script (over ManageSieve, the REST API's self-service filter, or the administration interface) could therefore have the server send a notification from any address, on this server or anywhere; and where the claimed address is at a domain the server hosts with DKIM signing enabled, the server signed the notification with that domain's DKIM key, because it signs by the From header's domain, producing forged mail aligned to pass the domain's DMARC policy. The notify action and this behaviour were introduced in 6.2.22. In the mail-rule engine, a rule's Reply was likewise sent from whatever address the action named, whoever the rule belonged to, so that an account acting on its own rules over COM, a domain administrator, or an API key confined to a domain (over the REST API from 6.3.4) could have a domain's or an account's rule reply from any address, signed, where that address is at a domain the server hosts with DKIM signing enabled, with that domain's key. |
| Missing authorization in the Sieve editheader action (6.2.22 through 6.3.6) and in the mail-rule Set header value action (6.0.0 through 6.3.6) of Progressive Robot hMailServer allows an authenticated user to make the server send mail as any address, DKIM-signed where the address is at a domain the server signs for. A Sieve script's editheader (addheader/deleteheader) could add or delete any header field except Received and Return-Path, and the server applies a script's header edits before it queues a redirect, so the redirected copy is sent as the script left it. The server signs a message's first delivery pass as the domain named in its From header wherever it signs DKIM for that domain and the message carries no signature of it. A script could therefore delete and re-add From - another account's address, or anyone's at a hosted domain - and redirect, so the server sent the message in that name and, for a hosted domain, signed it with that domain's DKIM key, a forgery aligned to pass the domain's DMARC; or, where another sender's domain is one the server signs for, delete the DKIM-Signature that sender's message arrived with, alter a field, and redirect, so the server re-signed the altered message as that sender's domain. editheader placed no restriction on From, Sender, Resent-From, Resent-Sender or DKIM-Signature. The editheader action was introduced in 6.2.22. In the mail-rule engine, a domain's or an account's rule's Set header value action could likewise set From, Sender, Resent-From, Resent-Sender or DKIM-Signature ahead of a forward or a copy, whoever the rule belonged to, so that an account acting on its own rules over COM, a domain administrator, or an API key confined to a domain (over the REST API from 6.3.4) could have the server forward or copy a message in the name of any address, signed, where that address is at a domain the server hosts with DKIM signing enabled, with that domain's key. |
| Joomla Extension - lomart.fr - Various SQL injection vectors in UP plugin extension 5.0.0-5.2.0, 6.0.0-6.0.29 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject pkt arguments in mutating subprogs
The verifier tracks changes in how PTR_TO_PACKET registers'
bounds are modified across subprog boundaries. PTR_TO_PACKET
registers are actually passed as PTR_TO_MEM, which is assumed
valid for the entire call. This is not the case with packet memory,
where a pskb_* call may invalidate its memory region.
Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that
may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET
because we would also need to somehow pass the PTR_TO_PACKET_META
or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing
the pointer in the subprog as PTR_TO_MEM, only permit it if the
subprog is guaranteed not to mutate the packet. |
| The Web add-on's HTTP server dereferences and releases an uninitialized pointer when it detects a `Content-Length` underflow while processing a `PUT` request. The condition is reachable by an unauthenticated remote client with a single malformed request. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 3.7.1 of the import-export module, duplicate-import continuation accepts client-controlled replacement choices without binding them to a user-owned server-side analysis or authorizing the canonical target. On an import-enabled localized type, a contributor with draft editing authority can cross the publication boundary by selecting a published document for replacement, although the current assessment is based on remediation review rather than a repeated end-to-end reproduction. This issue is fixed in version 3.7.1. |
| SolarWinds Observability Self-Hosted was found to be affected by a broken authorization schema that can allow low-privileged users to access and modify information beyond their assigned permissions. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, viewRole is not applied to anonymous visitors when a developer exposes user objects through a publicly rendered relationship or expressly enabled public API. Inadequately limited templates, including serialization of an entire related user object, can conditionally disclose user fields, but relationships do not automatically publish full user objects and password hashes are stored separately and are not affected. This issue is fixed in version 4.33.0. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, an authenticated editor with legitimate edit rights on a pre-existing ordinary page nested under a restricted parent can use the same-parent page move operation to change sibling ranks without create authorization on that parent. The non-default nesting must already exist, and the bypass is limited to sibling ordering rather than arbitrary content modification, confidentiality loss, or creation of the restricted nesting. This issue is fixed in version 4.33.0. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, ApostropheCMS’s exist-in-locale API allows an authenticated low-privilege user to determine whether restricted documents exist in a specified locale and mode, including draft mode. The endpoint returns localized document identifiers without applying document-level view or edit authorization criteria. This issue is fixed in version 4.33.0. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the REST route GET /api/v1/<piece-type>/:_id/locales (and the equivalent page route) does not apply the publicApiCheckAsync gate that ApostropheCMS's other read routes enforce. An unauthenticated caller can therefore query this route for any document _id and learn whether the document exists and which locales it is published in — a document-existence and locale-metadata disclosure that the read-API is otherwise supposed to gate. This issue is fixed in version 4.33.0. |
| A service account with user-management permissions in one organization can read, modify, disable or delete users belonging to other organizations on the same Grafana instance through the SCIM API (insecure direct object reference). Only Grafana Enterprise instances with SCIM enabled are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: stop Tx NAPI before disabling the queues
bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend()
both disable the Tx queues first and stop Tx NAPI several steps later. A
completion in flight calls netif_tx_wake_queue() in between, and nothing
stops the queue again, so a transmit can reach the rings after they have
been freed.
Close is safe because dev_deactivate_many() stops the qdisc first.
bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both
paths.
KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend
freezes user space before the callback runs:
BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258
Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14
bcmgenet_xmit+0x17f8/0x2258
dev_hard_start_xmit+0x13c/0x588
sch_direct_xmit+0x108/0x340
__dev_queue_xmit+0x1190/0x3848 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 2.7.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, Kustomize passes ref or version query values from remote resource, base, or component URLs to git fetch without an end-of-options separator. A leading-hyphen value can be parsed as --upload-pack and execute a command inside argocd-repo-server when the remote uses a local transport such as file://. Git does not run the supplied command for an https:// remote. The local transport does not leave the pod, so blocking repo-server egress does not prevent the execution. The command runs as the repo-server user, can read repository credentials and other process-accessible data, and can return output through manifest-generation errors. An attacker can commit a Kustomization to a Git repository that an Application builds or upload files through POST /api/v1/applications/manifestsWithFiles, also exposed by argocd app diff --local --server-side-generate. The upload path requires only Application get permission on an existing Application, without Application update or sync permission or repository write access. Kustomize 5.0.0 introduced acceptance of file://, whereas 4.5.7 rejects that transport; replacing the affected Kustomize with a newer version alone does not correct the missing option separator. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2. |
| MCP TypeScript SDK is the official TypeScript SDK for Model Context Protocol servers and clients. From version 1.24.0 to before version 1.32.0, the experimental tasks feature (taskStore) did not check which session created a task. Clients sharing one InMemoryTaskStore could list, read and cancel each other's tasks. This issue has been patched in version 1.32.0. |
| launch-editor allows users to open files with line numbers in editor from Node.js. Prior to 2.14.2, when an attacker can create a filesystem entry beginning with plus or minus in the working directory, an affected editor is selected, and the path can remain relative or is converted to a relative WSL path, launchEditor forwards the path without forcing it to be interpreted as a positional filename. Editor option parsing then treats the attacker-controlled filename as a command-line flag, which can cause unintended file overwrite or arbitrary command execution by the selected editor. The affected editors are Vim and gVim, MacVim, Emacs and Emacsclient, and Notepad++ when a plugin exposes dangerous operations; WSL path conversion keeps Vite and newer middleware callers exposed. This issue is fixed in version 2.14.2. |
| In Progress® Kendo® UI for jQuery versions starting with 2022.3.1109 and prior to 2026.3.1015, ToolBar ButtonGroup button URLs are concatenated into an unquoted href attribute after URL sanitization. An attacker who can control a button URL can supply an otherwise allowed HTTPS URL containing whitespace and additional attributes, including an event handler, and execute JavaScript in a user's browser when the affected button is interacted with. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery releases starting with v2020.1.114 and prior to 2026.3.1015, the Badge text method renders string values as raw HTML without encoding, including values supplied through text binding. An attacker who can modify data bound to a Badge can supply HTML containing event handlers that execute JavaScript in a user's browser when the Badge renders the value. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
