| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes. |
| Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close race between scheduler and state change
The mptcp scheduler may race with subflow sockets state change: data
transmission on the selected socket may fail and a later release could
try to use mss_now reset to 0 for a divide operation.
Address the issue by explicitly checking for the critical scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed qpair and response queue, causing a
use-after-free. This is especially likely during full adapter teardown,
where destroy_workqueue(ha->wq) forces pending work to run after the queue
pairs have been freed.
Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que()
after free_irq() has released the interrupt (so no new work can be
queued) and before the response queue and qpair memory are freed (so the
flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq
to match the INIT_WORK() condition and avoid operating on an
uninitialized work_struct. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: destroy seen inode bitmap when we fail to add a dirpath
LOLLM observes a memory leak in xchk_dirtree_create_path if we create
the directory path object but appending the name to the path fails.
When this happens, we don't tear down the (empty) seen inode bitmap.
This is a pretty trivial error, but let's not leave logic bombs.
Do the same for a similar bug in xrep_dirtree_create_adoption_path. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: put the "mdio" child node reference on success
macb_mii_init() holds the reference returned by of_get_child_by_name()
for macb_mdiobus_register() and drops it only on the error paths, so
every successful probe leaks a node reference. On a CM5, overlay
removal after four bind cycles reports
OF: ERROR: memory leak, expected refcount 1 instead of 5
Drop the reference after registration, where __mdiobus_register() has
already taken its own for the lifetime of the bus. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_set_level()
Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter")
incorrectly removed a null-id check from debug_set_level(), introducing
a possible NULL pointer dereference for debug-API users that put
debug_register() results unchecked into debug_set_level().
Fix this by moving the check from the internal _debug_set_level()
variant back to the external debug_set_level() wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Count dropped frames as NAPI work
The RX loop only consumes budget when it successfully delivers a frame.
Error paths keep consuming descriptors without reducing the budget, so a
stream of bad frames can process the entire receive ring in one poll.
Move the budget accounting to a common end-of-frame path. This counts
each completed frame as NAPI work whether it was delivered or dropped,
matching the behavior of the vendor driver. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to
avoid a possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to
IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over
a netdev with an unusually large MTU.
Steps to reproduce (included in the new selftest):
1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be
set to that MTU in ip6_setup_cork.
2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It
lets maxnonfragsize be set to device MTU (cork->fragsize) in
__ip6_append_data, rather than to IP6_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of
IPv6 header). Device MTU allows it (it's only one byte bigger than
IP6_MAX_MTU, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit
the change to UDP sockets only.
The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to
predate git history (verified reproduction on 2.6.21), was fixed later,
and then reappeared in commit 427faee167bc ("net: ipv6: introduce
ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The
overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in
commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix unit conversions in per_binval computation
LOLLM noticed that we're doing the unit conversion in the per_binval
computation backwards -- xfs_buf_inval_log_space's second parameter is
supposed to be in bytes, but max_binval is in units of fsblocks. Hence
the conversion should be FSB -> B, not the other way around. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount operations for this file system will fail with
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
kernel BUG at fs/super.c:777!
Fix this by only incrementing the reference count if the work has been
queued successfully. Taking it after queue_work() is safe because all
three callers hold tcon->open_file_lock across the call and
_cifsFileInfo_put() decrements under that same lock, so a worker that
starts the handler in the window cannot drop the reference before it has
been taken. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: invalidate queues before flushing them
fqdir_pre_exit() flushes the skbs from incomplete queues without
changing their completion state. A fragment which found a queue before
high_thresh was cleared can then acquire the queue lock and reuse stale
reassembly metadata. A queue concurrently killed after fqdir->dead is
set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while
still holding its old skbs; skipping it because it is complete leaves
those references behind until asynchronous fqdir teardown.
For IPv6, stale metadata can make ip6_frag_reasm() use the old
nhoffset with a new skb and access memory out of bounds. The resulting
heap corruption can be leveraged for local privilege escalation when
unprivileged network namespaces are available. Unflushed fragments can
also keep conntrack references alive after the conntrack per-net
cleanup point.
Kill each incomplete queue, then flush every queue still owned by the
dying rhashtable. HASH_DEAD identifies that ownership, while complete
queues without it are already owned by another destroy path and must be
left alone. Releasing a timer reference removed by inet_frag_kill() is
deferred to inet_frag_putn(), after the queue lock is dropped.
KASAN report:
BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
Write of size 1 at addr ff110001039c6e00 by task poc/771
Call Trace:
? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
Read of size 1 at addr ff110001039c6e08 by task poc/771
Call Trace:
? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 8 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) |
