| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: use rds_conn_drop() on protocol version mismatch
rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with
conn->c_cm_lock held. When the peer negotiates a protocol version
older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls
rds_conn_destroy(), which is only safe in the rmmod path: it
synchronously tears the connection down and flush_work()es the
shutdown work cp_down_w.
That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is
the very lock the event handler still holds, so the flush never
completes: the two workers wait on each other and the RDS connection
workqueues stall for good.
All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR,
DISCONNECTED) use rds_conn_drop(), which marks the connection
RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use
it here as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix out-of-bounds read in P2P public action frames
wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once
ieee80211_is_public_action() returns true. That helper only verifies the
frame is long enough for the action category field, that is
offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both
functions then read the P2P public action header up to oui_subtype at
offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where
ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32.
A public action frame of 25 to 31 bytes passes the check but is shorter
than that 32 byte header, so oui_subtype can be read out of bounds, and
because the length is unsigned, "size - ie_offset" underflows to a value
close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length,
so even the size_t subtraction in mgmt_tx() is truncated to the same
value. It then walks far past the buffer searching for a vendor element
until it reaches unmapped memory.
In the receive path the frame arrives over the air and needs no
association, so a nearby unauthenticated device can crash the host while
it is in P2P listen. Reject frames shorter than the P2P public action
header in both paths before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoatm: ensure a writable skb header and linear data
In pppoatm_send(), LLC encapsulation checks whether there is sufficient
headroom for the 4-byte LLC header, but does not ensure that the skb header
is writable.
Normal transmit packets passing through ppp_start_xmit() have their header
unshared via skb_cow_head(). However, packets can also reach pppoatm_send()
via PPP channel bridging (PPPIOCBRIDGECHAN) without going through
ppp_start_xmit().
Use skb_cow_head() to ensure both sufficient headroom and a writable
header before pushing the LLC header.
While at it:
- Call pskb_may_pull(skb, 1) before inspecting skb->data[0] to prevent
out-of-bounds reads on zero-length or non-linear frames (e.g. from
bridging).
- Defer SC_COMP_PROT protocol compression until after pppoatm_may_send()
succeeds. This eliminates the temporary skb allocation on admission failure
and completely removes the fragile "undo" heuristic at the nospace label,
avoiding any risk of reading uninitialized headroom or performing an
unbalanced skb_push(). |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Themekraft BuddyForms buddyforms allows PHP Local File Inclusion.This issue affects BuddyForms: from n/a through 2.10.2. |
| MCMS 6.1.1 through 6.2.1 has a SQL injection vulnerability in the custom model/form import feature. |
| Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated--- |
| Devika v1.0 is vulnerable to Directory Traversal in the Coder.save_code_to_project function, which allows attackers to write files outside the intended project workspace. |
| Bacularis 5.4.0 - 6.5.1 is vulnerable to Cross Site Scripting (XSS) in the Organization name field. |
| In Bacularis v1.0.0 - 6.5.1 when adding a new pool, the LabelFormat field allows for a Cross Site Scripting (XSS) payload. |
| Feehi CMS 2.1.1 contains a Server-Side Request Forgery (SSRF) vulnerability in the UEditor catchimage endpoint. The private-IP validation does not block loopback or link-local addresses, allowing an attacker to make the server probe internal HTTP services through response differences. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for
TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around
sk->sk_forward_alloc").
However, there is still a small race window between tcp_v6_rcv()
and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN
to TCP_CLOSE, causing skb_clone_and_charge_r() to be called
locklessly and resulting in the splat below. [0]
Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well.
This is fine for non-listeners because tcp_rcv_state_process()
drops skb for TCP_CLOSE and opt_skb was freed immediately anyway.
[0]:
sk->sk_forward_alloc
WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28
Modules linked in:
CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162
Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff
RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41
RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005
RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000
R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0
Call Trace:
<TASK>
__sk_destruct+0x82/0xae0 net/core/sock.c:2356
rcu_do_batch kernel/rcu/tree.c:2645 [inline]
rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622
run_ksoftirqd kernel/softirq.c:1076 [inline]
run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068
smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160
kthread+0x396/0x4a0 kernel/kthread.c:436
ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: restore the hardware filters on open
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk()
iptfs_skb_reset_frag_walk() advances to the fragment containing @offset
with an unbounded loop:
while (offset >= walk->past + walk->frags[walk->fragi].len)
walk->past += walk->frags[walk->fragi++].len;
walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced
without ever checking fragi against walk->nr_frags. When the requested
offset is at or beyond the total length spanned by the walk's fragments,
fragi runs past nr_frags and off the end of the fixed-size on-stack
frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory.
The two callers behave differently: iptfs_skb_add_frags() already guards
against this with
if (!walk->nr_frags ||
offset >= walk->total + walk->initial_offset)
return len;
but iptfs_skb_can_add_frags() has no such guard and calls
iptfs_skb_reset_frag_walk() unconditionally, so it performs the
out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only
afterwards, too late to prevent the read.
This is reachable from the receive path: a crafted IP-TFS (AGGFRAG)
payload delivered to an IPTFS SA drives iptfs_reassem_cont() ->
iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.:
BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250
Read of size 4 at addr ffff888008ad7210 by task repro/345
iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392
iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420
iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902
iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280
iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741
xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700
xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104
ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612
Give iptfs_skb_can_add_frags() the same up-front guard that
iptfs_skb_add_frags() already has, so the walk is never entered with an
out-of-range offset. When it triggers, the caller falls back to the
existing linearize-and-copy path, which is safe. |
| An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18.
An incomplete fix for CVE-2026-15307 in Django spatial lookups allows an attacker who can supply `bytes` values to cause the Django process to make network requests via a crafted VRT document referencing an external raster source.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank sicksec for reporting this issue. |
| Other issue in the JavaScript: WebAssembly component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
