| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: add missing xa_destroy for sched_node_ids
Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node")
added a sched_node_ids xarray to the port info structure, but never called
xa_destroy on it.
Since xarrays can allocate internal memory, this can result in a memory
leak even if every element in the xarray has been removed.
The xarray is currently embedded in the port_info structure. This appears
to have been done because its use is within functions that take the
port_info as a primary argument.
However, this complicates managing the lifecycle of the field. The
port_info structure is allocated in ice_init_hw() using devm, and it is
not released until the devm cleanup when the driver is unloaded.
The ice_init_hw() function is called in many places, including devlink
reload, and possibly during DDP load after updating the Tx scheduler
layout.
Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise
multiple concerns due to potential ordering issues and possible ways that
port_info could be a dangling reference.
To handle this, move the sched_node_ids out of port_info and into the hw
structure. All users of the array already have a pointer to hw anyways, and
there is only one sched_node_ids per adapter. While here, remove the overly
verbose comment explaining the nature of the sched_node_ids xarray.
Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(),
ensuring that we properly release the xarray memory.
This was caught by Sashiko during development of unrelated code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Update last skb marker in manage_oob().
Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU
due to OOB skb.
In the following cases, manage_oob() skips OOB skb(s) and returns
NULL for the last recv(MSG_PEEK):
socketpair(AF_UNIX, SOCK_STREAM, 0, sk);
1) skb -> OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
2) skb -> consumed OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
3) consumed OOB skb -> OOB skb -> NULL
send(sk[0], "a", 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_OOB);
send(sk[0], "b", 1, MSG_OOB);
recv(sk[1], buf, 1, MSG_PEEK);
Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer,
or non-OOB skb is not yet consumed), and unix_stream_data_wait() is
called.
However, it returns immediately because @last is not updated in
unix_stream_read_generic(), and the thread busy-waits for a new skb.
Let's update @last in manage_oob().
For MSG_PEEK, @last is updated with the skipped OOB, and for the
non-peek case, @last matches the returned value (when !copied)
because OOB is unlinked.
Note that manage_oob() is inlined and no stack canary is added. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi->lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_net: check TX pull result before RX copy
vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is
currently added to the unsigned byte counter and then passed as a size_t
length to receive_filter() and vringh_iov_push_iotlb(). A negative error
can therefore become a large length in the RX path.
Handle non-positive pull results before every length use. Count the TX
error and complete the consumed TX descriptor with zero bytes.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx
vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value
into v->config_ctx before checking it, so on failure the field briefly
holds an ERR_PTR:
ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd);
swap(ctx, v->config_ctx);
if (!IS_ERR_OR_NULL(ctx))
eventfd_ctx_put(ctx);
if (IS_ERR(v->config_ctx)) {
long ret = PTR_ERR(v->config_ctx);
v->config_ctx = NULL;
return ret;
}
Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if
eventfd_ctx_fdget() fails") added that clearing, and spelled out the
invariant the rest of the file relies on: "we consider 'v->config_ctx'
valid if it is not NULL". The window between the swap and the clearing
still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config
interrupt delivered inside the window hands the ERR_PTR to
eventfd_signal().
Check the fd before installing it instead. That closes the window and
matches how vhost_vring_ioctl() handles the same failure for the vq call
fd.
It also stops a rejected fd from tearing down a config interrupt that was
working: until now the swap replaced the live context and put it, so
after an EBADF the device silently stopped delivering config interrupts
until userspace installed a new fd. |
| The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered.
Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix under-reservation of blocks when repairing sf directories
Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n
size=8192", I observed the following (trimmed) dmesg splat:
XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387
WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511
CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8
Tainted: [W]=WARN
RIP: 0010:assfail+0x46/0x4a [xfs]
RSP: 0018:ffffc900010d7890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1
RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940
R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0
FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0
Call Trace:
<TASK>
xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x7a/0x3b0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is a consequence of commit 0fe77e57588b98, which added the
following assertion to xfs_da_grow_inode_int:
ASSERT(args->total >= dp->i_nblocks - nblks);
Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args
object that's passed to xfs_dir2_sf_to_block sets args->total to 1.
This is incorrect because mkfs set the directory block size to 8k and
the filesystem block size to 4k. In other words, args->total should be
2 here, not 1.
Dave Chinner tripped over the same problem with the same branch through
a different channel -- his test setup set the fs block size to 1k, in
which case the directory block size is still set to 4k. Here,
args->total should be 4.
Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount
makes the assertion go away, but that isn't a complete fix. In
xrep_tempexch_estimate, we also incorrectly assume that a shortform
conversion requires 1 fsblock when it should be m_dir_geo->fsbcount.
Without that, we can under-reserve space in the transaction and cause a
filesystem shutdown.
Note that the xfs_dabuf_nfsb helper will compute the correct value for
directories and xattr, so we use that instead of open-coding the logic.
Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb
to avoid one logic bomb if we ever support multi-fsblock attrs.
Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: cope with concurrent instance destruction
Instances are refcounted. However, only memory release happens on the
1 -> 0 transition; the unlink from hashes can occur with any refcount.
Uncooperative userspace can force a situation where a queue is pending
for destruction from netlink event while a different socket with same
portid processes an UNBIND request.
With right timing, this will unhash the instance again:
Oops: general protection fault, [..]
Call Trace:
<TASK>
nfulnl_recv_config+0x31a/0xd50
nfnetlink_rcv_msg+0x7c2/0xeb0 |
| A vulnerability was determined in dgtlmoon Changedetection.io up to 0.55.8. This issue affects the function setCurrentSelectedText of the file changedetectionio/static/js/visual-selector.js of the component Visual Selector. Executing a manipulation of the argument s can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.60.1 is capable of addressing this issue. This patch is called aac6fcfa594f17511b8ff73e5eaa4f6c33899de0. It is suggested to upgrade the affected component. |
| Concrete CMS Community Store before 2.7.8 derives digital product download tokens from order creation timestamps instead of random values, making tokens predictable. Unauthenticated attackers can enumerate sequential order and file identifiers to calculate valid download tokens and retrieve digital goods purchased by other customers. |
| A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. Affected is an unknown function of the file HospitalController.java of the component Public Search Handlers. The manipulation of the argument Search leads to cross site scripting. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in rpcbind. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a large number of unique requests. The rpcbind service records previously unseen RPC (Remote Procedure Call) statistics in unbounded in-memory lists, leading to persistent memory growth and increased CPU usage. This can degrade or exhaust service availability. |
| MarketKing plugin for WordPress before 2.1.72 contains a missing authorization vulnerability in the marketking_admin_vendors_ajax AJAX action that allows authenticated attackers with subscriber-level access or higher to retrieve the complete vendor directory by sending a crafted AJAX request. Attackers can exploit the absence of capability checks in the vendor management action to retrieve internal user IDs, usernames, and email addresses of all registered vendors, exposing personally identifiable information to any logged-in user regardless of role. |
