| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator
devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.
The devm disable action was previously only registered when the caller
explicitly requested enable, so when the regulator was left in its initial
enabled state without an explicit enable call, the cleanup path skipped
decrementing enable_count, triggering a WARN_ON during regulator
release on device removal.
Fix this by always registering the devm disable action based on the actual
enabled state via regulator_is_enabled(), regardless of whether the
caller requested an explicit enable. This covers both the explicitly
enabled case and the initial state set by devm_regulator_get_exclusive(). |
| An address bar spoofing issue in affected versions of Arc could allow an attacker to spoof the browser address bar via a <select> element that triggers requestFullscreen without displaying the fullscreen notification. |
| Arc Search for Android before version 1.12.10 does not display a fullscreen notification when a page enters fullscreen mode while the app is running in the background. A remote attacker can exploit this via a specially crafted website to render fake UI elements, such as a spoofed address bar, misleading the user about the origin of displayed content and increasing the risk of phishing. |
| Incomplete cleanup vulnerability in Apache Tomcat allows a malformed request to potentially (depends on timing) cause one request from another user to fail.
This issue affects Apache Tomcat: from 11.0.19 through 11.0.25, from 10.1.53 through 10.1.59, from 9.0.116 through 9.0.121.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| libxls through version 1.6.3 contains a use of uninitialized memory vulnerability in the OLE container parser. Memory allocated for the Master Sector Allocation Table (MSAT) in read_MSAT() is not fully initialized before being consumed by ole2_validate_sector_chain(), which may result in application crashes or potential information disclosure when processing a crafted XLS file |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to determine kernel memory layout. |
| In multiple locations, there is a possible information disclosure due to uninitialized memory use. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of physmem_extmem_linux.c, there is a possible out-of-bounds read due to uninitialized data. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Return zero on status read failure
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: Reject descending VLAN tunnel ranges
A pair of descending VLAN and tunnel IDs can pass the tunnel range span
check. The VLAN subtraction produces a negative int, which is converted
to unsigned when compared with the u32 tunnel ID subtraction. It can
therefore equal the wrapped tunnel ID delta.
The range loop then performs no iterations. Since the batched
notification handling added a post-loop error check, this leaves err
uninitialized and makes the request's return value unpredictable.
Reject descending VLAN ranges before comparing the spans. Valid
ascending and single-entry ranges remain unchanged, while malformed
descending ranges consistently return -EINVAL.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix use of uninitialized memory in CORE_INIT_RSP parsing
nci_core_init_rsp_packet_v1() and nci_core_init_rsp_packet_v2() parse
the CORE_INIT_RSP packet without validating that the skb contains
enough data. A malformed response (e.g. injected via virtual_ncidev)
can declare a large num_supported_rf_interfaces while providing
insufficient data, causing reads of uninitialized slab memory. This
is later used in nci_init_complete_req(), triggering a KMSAN
uninit-value warning.
Add skb length checks before accessing packet fields:
- Validate the skb has at least 1 byte for the status field.
- Validate the skb can hold the fixed-size header before parsing.
- In v2, bounds-check each variable-length rf_interface entry and its
extension parameters within the parsing loop.
- In v1, verify the skb is large enough for both the variable-length
rf_interfaces array and the trailing rsp_2 structure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx->txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths
The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation
failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which
calls dma_fence_put() on the fence. However, at that point the fence has
only been kmalloc'd — dma_fence_init() has not been called yet, so the
refcount and the fence ops are uninitialized. Calling dma_fence_put() on
such an object leads to undefined behavior.
Use kfree() instead, since the fence is just a plain allocation at this
stage, and rename the label to err_fence_free to reflect the actual
cleanup action. |
| UI misrepresentation in WebAppInstalls in Google Chrome prior to 153.0.8010.52 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read. |
| Incomplete cleanup in GetUserMedia in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
Several bsg handlers stage their request/reply in an uninitialized 256-byte
on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via
sg_copy_to_buffer(), which only copies as many bytes as the user-supplied
request payload. When the request is shorter than the structure, the
remainder of the buffer is left holding stale stack data.
qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full
structure back to the reply payload with sg_copy_from_buffer(), leaking the
uninitialized stack bytes to user space. The write/update paths do not copy
the buffer back, but can feed uninitialized fields to the device.
Zero the stack buffer at declaration in all five handlers, mirroring the
heap kzalloc() approach, so short requests can no longer expose stale
memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: loongson: Fix error handling in ACPI property parsing
In loongson_card_parse_acpi(), the return value of
device_property_read_string() for the `codec-dai-name` property was
ignored. If the property is missing or invalid, an uninitialized pointer
would be used later, potentially leading to undefined behavior.
Fix this by checking the return value and propagating the error
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
The mbx_cmd_t is allocated on the stack but left uninitialized.
qla2x00_mailbox_command() has several early-return paths (PCI permanent
failure, device failed, EEH busy, ISP abort pending, mailbox access
timeout, purge mbox) that return without writing the input mailbox
registers back into mcp->mb[]. qla2x00_get_firmware_state() then
unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's
states[] array regardless of the return value.
On such a failure the copied values are uninitialized kernel stack
memory, which is then exposed to userspace via the fw_state and
mpi_fw_state sysfs handlers. Zero the mailbox struct so a failed query
yields deterministic zeroed state instead of leaking stack contents. |
