Export limit exceeded: 400096 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 400096 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400096 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97433 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: validate FDP configuration descriptor sizes Validate descriptor sizes while walking the FDP configurations log so dsze == 0 or a descriptor past the log end cannot cause unbounded iteration or reads past the buffer. | ||||
| CVE-2026-97437 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e() The bounds check in ntfs_dir_emit() compares fname->name_len (a character count) against e->size (a byte count) without accounting for the 2-byte-per-character UTF-16LE encoding or the ATTR_FILE_NAME header size: if (fname->name_len + sizeof(struct NTFS_DE) > le16_to_cpu(e->size)) This computes: name_len + 16 > e_size The correct check must account for the ATTR_FILE_NAME header (66 bytes before the name) and the UTF-16LE character size (2 bytes each): sizeof(NTFS_DE) + offsetof(ATTR_FILE_NAME, name) + name_len * sizeof(short) > e_size Which computes: 16 + 66 + name_len * 2 > e_size The correct calculation already exists as fname_full_size() in ntfs.h and is used in cmp_fnames(), namei.c, and fslog.c, but was not used in the readdir path. A crafted NTFS image with an index entry containing a small e->size but large fname->name_len bypasses the current check, causing ntfs_utf16_to_nls() to read past the entry boundary. Additionally, add a key_size validation in hdr_find_e() to ensure the declared key_size does not exceed the available entry data, preventing comparison functions from reading past entry boundaries on the lookup path. | ||||
| CVE-2026-97570 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | ||||
| CVE-2026-97608 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: unregister loggers before per-net teardown nf_log_syslog and nfnetlink_log unregister their per-network namespace operations before unregistering their global logger backends. This leaves a window where a sysctl or netlink writer can rebind the still- registered logger after the per-net pre-exit callback cleared the old selection. The race looks like this: CPU 0 CPU 1 ---- ---- unregister_pernet_subsys() nf_log_unset(net, logger) net->nf.nf_loggers[pf] = NULL lock nf_log_mutex find logger in loggers[][] net->nf.nf_loggers[pf] = logger unlock nf_log_mutex nf_log_unregister(logger) lock nf_log_mutex loggers[pf][type] = NULL unlock nf_log_mutex synchronize_rcu() module exit returns module core frees backend memory Later, a sysctl read or packet logging operation can dereference the stale per-net logger pointer. Fix this by unregistering the global logger backends before tearing down per-net state. Once the global registrations are gone, later writers can no longer rebind the logger. unregister_pernet_subsys() already waits for an RCU grace period after the pre-exit callback clears the per-net selection, while nf_log_unregister() continues to cover readers of the global logger table. Apply this ordering fix to both nf_log backends that combine per-net teardown with global logger registration. | ||||
| CVE-2026-97611 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix use-after-free of the flow table mask array tbl_mask_array_realloc() retires the old mask_array before it stops being reachable: old = ovsl_dereference(tbl->mask_array); if (old) { ... call_rcu(&old->rcu, mask_array_rcu_cb); } rcu_assign_pointer(tbl->mask_array, new); call_rcu() only waits for read-side critical sections already in flight. tbl->mask_array still points at old between the call_rcu() and the rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in that window picks up old in a fresh critical section that the pending grace period does not cover. tbl_mask_array_realloc() runs in process context under ovs_mutex, so the window is preemptible and can outlast the grace period. Then mask_array_rcu_cb() frees old before the swap runs: BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0 Read of size 8 at addr ffff888020b3e018 by task poc/741 flow_lookup.constprop.0+0x2bf/0x2f0 ovs_flow_tbl_lookup_stats+0x4a3/0x5c0 ovs_dp_process_packet+0x19c/0x710 ovs_vport_receive+0x243/0x390 internal_dev_xmit+0x81/0x170 Freed by task 728: kfree+0x16a/0x4e0 rcu_core+0x853/0x1030 Publish the new array before retiring the old one. The kfree_rcu() that call_rcu() replaced ran after the swap. | ||||
| CVE-2026-97941 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely. | ||||
| CVE-2026-97979 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: add missing xa_destroy for sched_node_ids Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node") added a sched_node_ids xarray to the port info structure, but never called xa_destroy on it. Since xarrays can allocate internal memory, this can result in a memory leak even if every element in the xarray has been removed. The xarray is currently embedded in the port_info structure. This appears to have been done because its use is within functions that take the port_info as a primary argument. However, this complicates managing the lifecycle of the field. The port_info structure is allocated in ice_init_hw() using devm, and it is not released until the devm cleanup when the driver is unloaded. The ice_init_hw() function is called in many places, including devlink reload, and possibly during DDP load after updating the Tx scheduler layout. Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise multiple concerns due to potential ordering issues and possible ways that port_info could be a dangling reference. To handle this, move the sched_node_ids out of port_info and into the hw structure. All users of the array already have a pointer to hw anyways, and there is only one sched_node_ids per adapter. While here, remove the overly verbose comment explaining the nature of the sched_node_ids xarray. Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(), ensuring that we properly release the xarray memory. This was caught by Sashiko during development of unrelated code. | ||||
| CVE-2026-97982 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Fix budget accounting The gmac_rx() function returns the remaining NAPI budget, but its caller treats the return value as the number of packets received. An idle poll therefore reports a full budget and remains scheduled. Return the number of received packets instead. Preserve the existing free queue refill accounting by adding that count directly; continuing to subtract it from the budget would invert the refill behavior. | ||||
| CVE-2026-97985 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0], "a", 1, MSG_OOB); recv(sk[1], buf, 0, MSG_OOB); send(sk[0], "b", 1, MSG_OOB); recv(sk[1], buf, 1, MSG_PEEK); Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer, or non-OOB skb is not yet consumed), and unix_stream_data_wait() is called. However, it returns immediately because @last is not updated in unix_stream_read_generic(), and the thread busy-waits for a new skb. Let's update @last in manage_oob(). For MSG_PEEK, @last is updated with the skipped OOB, and for the non-peek case, @last matches the returned value (when !copied) because OOB is unlinked. Note that manage_oob() is inlined and no stack canary is added. | ||||
| CVE-2026-97986 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_input: stop callbacks before unregistering input device virtinput_remove() unregisters the input device before resetting the virtio device. virtinput_recv_events() drops vi->lock around input_event(), so clearing vi->ready does not stop a callback that passed the entry check. It can still use vi->idev, requeue buffers and kick the queue. Reset first, as virtinput_freeze() already does. With the preceding core change, reset waits for callbacks before input_unregister_device() can free vi->idev. Recheck vi->ready after taking the lock again: keep draining completed events so an input packet is not truncated, but stop requeueing buffers and kicking the queue. With evdev attached, input_unregister_handle() currently waits for an RCU grace period, which also waits out IRQ callbacks. This masks the lifetime bug on PCI and MMIO, but does not protect sleepable callbacks on other transports. | ||||
| CVE-2026-97990 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-97993 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") added that clearing, and spelled out the invariant the rest of the file relies on: "we consider 'v->config_ctx' valid if it is not NULL". The window between the swap and the clearing still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config interrupt delivered inside the window hands the ERR_PTR to eventfd_signal(). Check the fd before installing it instead. That closes the window and matches how vhost_vring_ioctl() handles the same failure for the vq call fd. It also stops a rejected fd from tearing down a config interrupt that was working: until now the swap replaced the live context and put it, so after an EBADF the device silently stopped delivering config interrupts until userspace installed a new fd. | ||||
| CVE-2026-78397 | 1 Wordpress-extensions | 1 Link Library | 2026-09-26 | 4.0 Medium |
| The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered. Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled. | ||||
| CVE-2026-97524 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it. | ||||
| CVE-2026-97526 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for CPU add and delete and create the necessary per-CPU data infrastructure during CPU hotplug add processing. Same for CPU hotplug remove. This is done when the CPU is offline to ensure the data structures are available when CPU is made online and tasks are scheduled on it. [hca@linux.ibm.com: fixup error path in pai_init()] | ||||
| CVE-2026-97533 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF A previous commit protected against races between ptdump and CPA collapse, however one still exists between attribute changes and collapse as reported by Denis V. Lunev (linked). When an attribute change arises, a lockless page table walker obtains a PTE entry, which is later written to via set_pte_atomic(): ... -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> _lookup_address_cpa() -> lookup_address_in_pgd_attr() -> [ lockless page table walker ] -> set_pte_atomic() There is nothing preventing a concurrent CPA collapse which can free the PTE that was retrieved here, resulting in a use-after-free. With the mmap write lock taken on init_mm over CPA collapse, resolve this race by acquiring an mmap read lock on init_mm over __change_page_attr_set_clr(). This locks across the whole operation over which the walk and the PTE entry write occurs, solving the race. It is safe to do this here, as no spinlocks are held upon entry to __change_page_attr_set_clr(). However, the lock must not be held over an allocation, as allocation can trigger reclaim and shrinkers may call into CPA recursively, making deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm). A page table is allocated when a huge page needs to be split: -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> split_large_page() [ pagetable_alloc() ] -> __split_large_page() Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in split_large_page() and track whether this is needed by adding a new 'init_mm_read_locked' flag to struct cpa_data. This is safe as __split_large_page() (called with locks re-established) revalidates that the page table entry is the same as it was prior to the locks being dropped and __change_page_attr() repeats the entire page table walk whenever a split occurs, so concurrent split and collapse are accounted for. Concurrent ptdump is also safe as the lock is only dropped over page table allocation during which time the page table has not yet been modified. The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively operates upon vmalloc ranges, and on x86 only within the module mapping space. This is important, because some callers directly invoke __change_page_attr_set_clr(), bypassing this lock. However, none of these operate within the module mapping space. * cpa_process_alias() - a recursive helper called by __change_page_attr_set_clr(). * __set_memory_enc_pgtable() - operates on the direct mapping and (via __vmbus_establish_gpadl()) the vmalloc mapping space. * __set_pages_[n]p() - called by set_direct_map_[invalid, default, valid]_noflush(), __kernel_map_pages() - operates on the direct map. * kernel_[un]map_pages_in_pgd() - operates on EFI ranges. This work is based upon Denis V. Lunev's excellent analysis of the bug with gratitude. [ dhansen: move to imperative voice in changelog ] | ||||
| CVE-2026-97549 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix under-reservation of blocks when repairing sf directories Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n size=8192", I observed the following (trimmed) dmesg splat: XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387 WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511 CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8 Tainted: [W]=WARN RIP: 0010:assfail+0x46/0x4a [xfs] RSP: 0018:ffffc900010d7890 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1 RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940 R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0 FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0 Call Trace: <TASK> xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x7a/0x3b0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 This is a consequence of commit 0fe77e57588b98, which added the following assertion to xfs_da_grow_inode_int: ASSERT(args->total >= dp->i_nblocks - nblks); Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args object that's passed to xfs_dir2_sf_to_block sets args->total to 1. This is incorrect because mkfs set the directory block size to 8k and the filesystem block size to 4k. In other words, args->total should be 2 here, not 1. Dave Chinner tripped over the same problem with the same branch through a different channel -- his test setup set the fs block size to 1k, in which case the directory block size is still set to 4k. Here, args->total should be 4. Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount makes the assertion go away, but that isn't a complete fix. In xrep_tempexch_estimate, we also incorrectly assume that a shortform conversion requires 1 fsblock when it should be m_dir_geo->fsbcount. Without that, we can under-reserve space in the transaction and cause a filesystem shutdown. Note that the xfs_dabuf_nfsb helper will compute the correct value for directories and xattr, so we use that instead of open-coding the logic. Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb to avoid one logic bomb if we ever support multi-fsblock attrs. Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") | ||||
| CVE-2026-97562 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 The same test passes with this change applied. Take the active reference in the callback while iterate_supers_type() still holds s_umount shared. cifs_put_tcp_super() remains the matching release. | ||||
| CVE-2026-97998 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0 | ||||
| CVE-2026-95657 | 1 Dgtlmoon | 1 Changedetection.io | 2026-09-26 | 3.5 Low |
| A vulnerability was determined in dgtlmoon Changedetection.io up to 0.55.8. This issue affects the function setCurrentSelectedText of the file changedetectionio/static/js/visual-selector.js of the component Visual Selector. Executing a manipulation of the argument s can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.60.1 is capable of addressing this issue. This patch is called aac6fcfa594f17511b8ff73e5eaa4f6c33899de0. It is suggested to upgrade the affected component. | ||||