| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The /api.php/user/get_list endpoint in Maccms v10 v2026.1000.4055 is vulnerable to an Incorrect Access Control issue. The interface fails to perform any authentication or authorization checks. An unauthenticated remote attacker can send a crafted HTTP GET request with limit and offset parameters to paginate and retrieve sensitive information of all registered users. |
| A weakness has been identified in Cesanta Mongoose up to 7.21. Affected by this vulnerability is the function fn of the file tutorials/mqtt/mqtt-server/main.c of the component MQTT Broker. Executing a manipulation can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 7.22 addresses this issue. This patch is called a9df523f76f43a38bd53b4232b9cfd4c16869e71. Upgrading the affected component is advised. |
| A vulnerability was determined in aaPanel BaoTa up to 11.8.0. The affected element is the function panelTask.bt_task._unzip of the file /www/server/panel/class/panelTask.py of the component Unzip Handler. Executing a manipulation of the argument Password can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
cifs_posix_to_fattr() ignores the return value of posix_info_parse().
When a malformed POSIX directory entry is encountered (e.g. invalid
SID lengths from an untrusted server), posix_info_parse() returns -1
without populating the 'parsed' struct. The uninitialized stack
memory in parsed.owner and parsed.group is then passed to
sid_to_id(), which processes the garbage bytes and passes them to
request_key() to construct a SID string, potentially leaking kernel
stack contents to the userspace idmap daemon.
Fix this by checking the return value and skipping the SID-to-id
mapping when parsing fails. The remaining fattr fields (timestamps,
mode, etc.) are populated directly from the 'info' pointer so they
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response()
If tb_cfg_request() fails setting up the request (for example the
control channel is shut down already) it returns an error without
calling the callback. To avoid leaking that memory, call
tb_cfg_request_put() if tb_cfg_request() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Set tb->root_switch to NULL when domain is stopped
Similarly what we do with the firmware connection manager. This makes
tb_xdp_handle_request() return error to the remote host. However, we
need to make sure we keep the uuid alive so that we can reply until the
whole domain is released. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dm1105: fix missing error check for dma_alloc_coherent
The return value of dm1105_dma_map(), which handles DMA memory allocation,
is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver
will proceed using a NULL pointer for DMA transfers, leading to a kernel
oops or invalid hardware access.
Fix this by checking the return value and propagating -ENOMEM on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ixp4xx - fix buffer chain unwind on allocation failure
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: avoid NULL deref of host->data in IRQ handler
mmc_davinci_irq() returns early only when both host->cmd and
host->data are NULL:
if (host->cmd == NULL && host->data == NULL) {
...
return IRQ_NONE;
}
So we may legitimately reach the rest of the handler with
host->data == NULL (and therefore data == NULL). The DATDNE branch
already guards against this with an explicit "if (data != NULL)"
check, but the subsequent TOUTRD ("read data timeout") and
CRCWR/CRCRD ("data CRC error") branches dereference data
unconditionally:
if (qstatus & MMCST0_TOUTRD) {
data->error = -ETIMEDOUT; <-- NULL deref
...
davinci_abort_data(host, data);
}
if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
data->error = -EILSEQ; <-- NULL deref
...
}
If either bit is set in qstatus while host->data is NULL, the kernel
will crash inside the IRQ handler. smatch flags this:
drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we
previously assumed 'data' could be null (see line 914)
Gate both branches on a non-NULL data, matching the existing pattern
used by the DATDNE branch.
No functional change for callers where data is non-NULL, which is
the only case in which these branches did meaningful work before
this change. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
