| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Microsoft Windows Search Component allows an authorized attacker to elevate privileges over a network. |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Starting in version 2.0.0 and prior to version 3.0.6 and 4.0.2, an uncontrolled resource consumption / algorithmic complexity vulnerability (CWE-400) affects any application that parses untrusted email with this library. Three independent parsing paths are super-linear in cost, so a byte-size cap on the caller side does **not** bound the work done. A crafted message under 2 MB can consume seconds of CPU or hundreds of megabytes to multiple gigabytes of memory (leading to an out-of-memory kill), enabling denial of service. The parse is lazy, but the cost is paid on the first `getAllParts()` or content read. This is fxed in 4.0.2 and 3.0.6. The fixes add configurable limits on multipart nesting depth and on header count / total header size (recording a parse error past the threshold rather than throwing), and change sibling append to O(n). Users should upgrade to one of these (or later) versions. Versions 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. (Versions prior to 2.0 used a different parser and are not affected by all three paths.) These costs are super-linear, so an input byte-size cap alone does not bound them. Until upgrading, restrict exposure of the parser to untrusted input, and run parsing under a constrained memory_limit and execution time limit so a malicious message fails its own request rather than exhausting the host. |
| Double free in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Prior to version 3.0.6 and 4.0.2, CRLF (carriage-return / line-feed) header injection (CWE-93) affecting any application that uses this library to build or forward MIME messages with an attacker-influenced attachment filename. Attachment filenames are interpolated into the `Content-Type` and `Content-Disposition` header values without stripping CR/LF, so a filename containing `\r\n` serializes as one or more additional, attacker-controlled header lines (for example a forged `Bcc:` that silently exfiltrates a copy of the outgoing message). The untrusted filename can come directly from parsed inbound mail, so no local construction is required — an application that re-attaches or re-sends a parsed filename is exposed. Versions 3.0.6 and 4.0.2 patch the issue. Versions 1.x and 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. If upgrading is not immediately possible, strip CR and LF from any filename before passing it to attachment APIs, and from the result of getFilename() before reusing it in a constructed message — e.g. preg_replace('/[\r\n]+/', ' ', $filename). |
| External control of file name or path in Windows Shell allows an authorized attacker to elevate privileges locally. |
| A flaw was found in multicluster-global-hub. During a ManagedClusterMigration, the system incorrectly grants all managed hubs read access to a shared communication topic. This allows a compromised managed hub to intercept and collect sensitive bootstrap kubeconfigs, which contain API server tokens intended for other hubs. These tokens have an extended validity of approximately 9.86 years, significantly increasing the risk of unauthorized access and information disclosure to other managed clusters. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.9.0 until 4.14.7, wazuh-clusterd in framework/wazuh/core/cluster/common.py allocates a payload buffer using the size declared in a 20-byte cluster protocol header before Fernet decryption validates the peer. An unauthenticated network peer can declare a payload of up to 256 MiB, stop sending after the header, and retain that allocation until the TCP connection closes. The cluster listener has no application-level per-source connection budget in affected versions, allowing concurrent sockets to multiply memory consumption and potentially terminate the cluster process, disrupt synchronization, and interrupt distributed API forwarding. This issue is fixed in version 4.14.7. |
| http4s-scala-xml provides `EntityDecoder[F, scala.xml.Elem]` instances that parse XML message bodies. Prior to versions 0.24.1 and 1.0.0-M39, these decoders used a `javax.xml.parsers.SAXParserFactory` obtained from `SAXParserFactory.newInstance` without any security configuration. With the JDK's default settings, the parser resolves DOCTYPE declarations, external general and parameter entities, and external DTDs.An application that uses these decoders to parse untrusted XML is vulnerable to XML External Entity (XXE) attacks. An attacker can craft a request that discloses local files readable by the service process, performs server-side request forgery (SSRF) against internal network resources, and/or causes denial of service through entity expansion. Versions 0.24.1 and 1.0.0-M39 fix the issue. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.8.0 until 4.14.7, the _getattributes() function in src/os_xml/os_xml.c recursively processes every XML attribute without a depth limit while allocating two large local buffers in each stack frame. An enrolled agent can submit a Windows EventChannel event containing an element with enough attributes to exhaust the analysisd worker-thread stack, trigger a segmentation fault, and interrupt log ingestion. The element-depth limit in _ReadElem() does not constrain the number of attributes on one element, so it does not prevent this condition. This issue is fixed in version 4.14.7. |
| The ixo Blockchain is a Layer 1 blockchain that runs on both Testnet and Mainnet. Prior to version 8.0.0, the x/bonds module moved funds from an address that was resolved from a DID verification method, without verifying that the resolved address belonged to the transaction signer. Affected handlers included MsgMakeOutcomePayment, MsgBuy, MsgSell, MsgSwap, and MsgWithdrawShare, as well as the batch order processor. Because any account may list an arbitrary blockchainAccountID as a verification method on a DID it controls (without the consent of that address's owner), an attacker could register victims' addresses as verification methods on their own DID and then move the victims' balances into a bond the attacker controlled — later withdrawing and bridging the proceeds off-chain. This was exploited on ixo mainnet (ixo-5) on 2026-06-20. The attack required no victim keys, signatures, or system compromise — any account holding a balance in a token a bond could use was at risk. This was fixed in v8.0.0, delivered via the on-chain v8 software-upgrade. The x/bonds module is disabled: every bonds message is rejected on all routes (top-level, authz, CosmWasm, and ICA), and the bonds batch EndBlocker is a no-op so no further reserve movements can occur. All node operators and validators must upgrade to v8.0.0. The flaw is in chain state-machine logic and can only be remediated by running the patched binary. There is no application-level workaround. The vulnerability is in consensus logic; remediation requires the network to run the patched (v8.0.0) binary. The bonds module remains disabled in v8.0.0 and will only be re-enabled in a future release once the signer-authorization model has been corrected. |
| Decepticon is an autonomous hacking agent for red teams. Versions prior to 1.1.17 wrap web crawl results — the output of agent reconnaissance against target services — into LLM messages without neutralizing ChatML special-token literals. Under the BYOK (Bring Your Own Key) deployment model, users configure their own LLM credentials to any OpenAI-compatible endpoint. Most open-source and self-deployed model providers (vLLM, SGLang, Ollama, LM Studio, text-generation-webui, etc.) do not filter special-token literals from user content in their default configurations. Those literals are parsed into structural role-boundary token IDs, meaning an attacker string planted in a target web page forges a new operator turn the model treats as authoritative, bypassing Decepticon's agent guardrails and resulting in arbitrary command execution inside the Kali Linux sandbox. Version 1.1.17 patches the issue. |
| Habitica is a habit tracker application that treats goals like a role-playing game. From 4.172.1 until 5.48.2, a query parameter on Habitica's /api/v3/groups/:groupId/members route is not sanitized before being interpreted as a regular expression. An authenticated caller can supply a computationally expensive regular expression that degrades application performance or halts Node.js processes. This issue is fixed in version 5.48.2. |
| DBHub is a database MCP server for Postgres, MySQL, SQL Server, Oracle, MariaDB, SQLite. Prior to version 0.22.6, setting `readonly = true` on the `execute_sql` tool does not make the connection read-only. The connectors are written to set PostgreSQL `default_transaction_read_only=on` (and open SQLite in `readOnly` mode), but that code is gated on a config value that is never populated, so it never runs. The only thing left enforcing read-only is a classifier that inspects the first keyword of each statement. Any `SELECT` that writes or has side effects through a function call passes it. With an ordinary role this allows sequence tampering; with a privileged role it allows writing arbitrary files on the server (`lo_export`), reading arbitrary host files (`pg_read_file`), and remote code execution (`dblink` + `COPY ... TO PROGRAM`). The HTTP transport is unauthenticated and binds to `0.0.0.0` by default, so this is reachable by any network caller of `/mcp`. Version 0.22.6 patches the issue. |
| xhtml-purifier is a Node.js library to take in raw/unknown/untrusted HTML and output cleaned, purified, trusted HTML. Versions prior to 0.4.3 do not HTML-entity-encode attribute values when serializing its sanitized output. In attributeString() (XHTMLPurifier.js, around line 148) the attribute value is concatenated directly into a double-quoted attribute without encoding. As a result, an attacker-controlled value in any allowed attribute (class, style, title, alt, src, href) can include a double-quote character to break out of the attribute and inject an additional attribute, such as a JavaScript event handler (for example onmouseover or onerror). The injected handler survives sanitization and executes when the output is rendered, which is a sanitizer bypass leading to cross-site scripting. The fix in version 0.4.3 HTML-entity-encodes attribute values before serialization. |
| Missing bounds validation for operator could allow out of range operator-code lookup during model loading
Affected version is prior to commit 1.30.0. |
| An administrative user with access to configure webhooks can execute arbitrary commands by configuring and then triggering webhooks containing specific FreeMarker template syntax.
This issue affects all MongoDB Ops Manager 7.0 versions and MongoDB Ops Manager versions 8.0.22 and prior. |
| Stack exhaustion vulnerability in the MongoDB PHP driver can cause application crashes when processing deeply nested BSON documents in unusual circumstances when the source of these BSON documents is not MongoDB Server. |
| Rsdoctor is a build analyzer tailored for projects built with Rspack. Prior to version 1.5.16, the default Rsdoctor report HTTP server started by `@rsdoctor/rspack-plugin` binds to all network interfaces (`0.0.0.0`) and serves a `POST /api/data/key` endpoint with no authentication and wildcard CORS (`Access-Control-Allow-Origin: *`). Any network-adjacent or remote attacker can send a single unauthenticated request to retrieve the full source code of all compiled JavaScript modules (`moduleCodeMap`), serialized build configuration (`configs`), error details, and other sensitive build metadata. This server is enabled by default in non-CI environments, requiring no special configuration from the victim developer. Version 1.5.16 patches the issue. |
| Creating a "2dsphere_bucket" index on a non-timeseries bucket collection will succeed, but any subsequent attempt to insert a document which triggers updating that index will crash the server. A similar issue occurs when creating "queryable_encrypted_range" indices.
This issue affects MongoDB Server v7.0 versions prior to 7.0.32, v8.0 versions prior to 8.0.21 and v8.2 versions prior to 8.2.6 |
