| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw versions before 2026.7.1 fail to properly authorize non-owner users executing MCP configuration changes through /mcp set and /mcp unset commands. Attackers can persist arbitrary stdio MCP commands that execute with OpenClaw process privileges when configuration loads, compromising host confidentiality, integrity, and availability. |
| OpenClaw is an agent gateway distributed via npm. In versions >= 2026.4.10 and < 2026.7.1, persistent memory dreaming mutations omit owner permission checks. An authorized but non-owner external-channel sender can issue the persistent '/dreaming on' and '/dreaming off' commands to enable or disable the Gateway's Memory Core dreaming behavior, disabling background memory processing or re-enabling durable memory promotion where the owner expected it to remain disabled; the practical confidentiality, integrity, and availability impact depends on stored conversation material and subsequent memory use. Read-only status and help commands remain governed by normal command policy. The issue is fixed in version 2026.7.1. As a workaround, disable dreaming commands in external channels or restrict channel command access to owners. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 does not enforce the administrator scope requirement on browser control when it is reached through the node.invoke method, although direct browser.request access requires administrator scope. In Gateway deployments that honor caller identity and narrower operator scopes, a write-scoped caller with access to a connected browser-capable node can inspect pages, navigate tabs, or interact with browser-visible applications without the configured admin requirement; practical impact depends on the browser profile and signed-in state. Shared-secret token and password callers are considered fully trusted operators under OpenClaw's security model and are not affected. The issue is fixed in 2026.7.1. |
| OpenClaw is an npm-distributed agent runtime. In versions >= 2026.2.26 and < 2026.7.1, PowerShell command analysis on Windows hosts running in exec allowlist mode could approve an exact executable resolved from PATH but subsequently execute a same-named executable located in the workspace directory. If lower-trust content can place an executable with an approved basename into an agent-writable workspace and steer an approved PowerShell command that uses a bare executable name, OpenClaw may run the workspace file instead of the allowlisted path, executing arbitrary code with the privileges of the Gateway or node-host user. The issue does not require replacement of the approved executable itself. Version 2026.7.1 contains a fix; as a workaround, avoid bare executable names in approved PowerShell commands and keep executable files out of agent-writable workspaces. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 improperly handles case sensitivity in the model-facing cron tool: a mixed-case payload kind can pass the agent-facing shell-execution guard and later normalize into a command job. An actor able to steer a tool-enabled agent can therefore create a persistent cron job that executes attacker-selected commands with the privileges of the OpenClaw process user, resulting in access to host files and credentials and impact to scheduled service availability. The issue is limited to cron jobs created or edited through the model-facing cron tool; direct CLI and authorized Gateway scheduling surfaces are trusted operator controls. Fixed in 2026.7.1. |
| OpenClaw versions before 2026.8.1 contain a server-side request forgery vulnerability in browser wait predicates that allows attackers to bypass SSRF protections by reaching blocked destinations. Attackers can use the wait --fn function against an existing browser session to request loopback or private destinations without navigation checks applied to other browser actions. |
| OpenClaw versions >= 2026.3.25 and < 2026.8.1 apply invalid-token rate limiting for Synology Chat webhooks before authentication and key the limit on the raw proxy socket address. In deployments where OpenClaw sits behind a trusted reverse proxy or tunnel and multiple external clients share a single socket address, an unauthenticated sender can exhaust the shared invalid-token budget, causing subsequent legitimate Synology Chat webhook callbacks to be rejected until the rate-limit window expires. The attacker cannot obtain a valid token or read message data; the impact is temporary loss of channel availability. Fixed in 2026.8.1. |
| OpenClaw versions before 2026.8.1 fail to properly restrict access to operator command cron jobs, allowing model-visible agent callers to read and execute ownerless command jobs. Attackers can inspect stored environment variables and force-run disabled or unscheduled command jobs to access secrets and execute operator-authored commands. |
| OpenClaw (npm package `openclaw`) before 2026.8.1 does not neutralize leading characters that spreadsheet applications interpret as formulas when the Control UI exports session data to CSV. Although session labels were quoted as CSV text, a lower-trust participant who can influence a session label or the first user message can place a formula-like cell in the Usage export; if an operator opens that export in a spreadsheet application with formula evaluation enabled, the cell may be evaluated with the permissions of the spreadsheet user. OpenClaw itself does not evaluate the formula, and practical impact depends on the spreadsheet application's security settings. The issue is fixed in 2026.8.1. |
| OpenClaw versions before 2026.8.1 contain a command parser vulnerability where escaped newlines confuse exec allowlist parsing, allowing hidden commands to execute. Attackers can craft input with escaped newlines to bypass allowlist validation and execute additional commands without expected authorization prompts. |
| OpenClaw is an npm-distributed gateway application. In versions >= 2026.7.1 and < 2026.8.1, Synology Chat attachment delivery could lose DNS pinning: the Gateway validated a single DNS result for a supplied file URL but then passed the original hostname to the Synology NAS, where it could resolve to a different destination. When attachment delivery accepted a remotely influenced hostname, an attacker could use DNS rebinding to make the NAS fetch a private or otherwise policy-denied resource and return its contents to the addressed conversation (server-side request forgery). Practical impact depends on NAS routing, resolver behavior, and the response available at the private destination. The issue is fixed in 2026.8.1; as a workaround, disable remote URL attachment forwarding in Synology Chat. |
| OpenClaw for iOS versions >= 2026.7.1 and < 2026.8.11 do not enforce saved Gateway TLS pins in the Control UI. While native connections enforced the saved Gateway fingerprint, the authenticated Terminal and session Dashboard WebViews omitted it. If a user had accepted a Gateway fingerprint, an attacker able to redirect the same host and port and present a different certificate that is accepted by iOS system trust can serve a replacement Control UI page; opening the Terminal or a session Dashboard then allows that page to read the injected Gateway token or password. The stolen credential can grant operator access, including reading sensitive Gateway state and invoking host-capable tools. This issue is fixed in 2026.8.11. |
| OpenClaw is a coding agent distributed as the npm package `openclaw`. In affected versions (2026.7.1 through 2026.7.2), alternate but valid `file:` URL spellings supplied over the Agent Client Protocol (ACP) were treated as relative paths and were incorrectly classified as reads scoped to the session working directory. When an operator connected `openclaw acp client` to an untrusted or compromised ACP peer, that peer could request a read of a file outside the session working directory without the approval prompt normally required for that path, resulting in disclosure of local file contents. The demonstrated impact is limited to file confidentiality; mutating and command-capable tool classes are not affected. This issue is fixed in OpenClaw 2026.8.1. |
| OpenClaw (npm package openclaw) before 2026.8.1 could include deterministic hashes computed over the original, unredacted configuration in redacted configuration responses. When the Gateway password had low entropy and the remaining configuration values were reconstructable, these hashes acted as offline password verifiers: a caller able to obtain the redacted configuration (for example via config.get) could test password candidates offline without going through the rate-limited Gateway authentication path. Recovering the password could grant the documented shared-secret operator authority. Secret references were not affected in the same way. The issue is fixed in 2026.8.1. |
| OpenClaw (npm package 'openclaw') before 2026.8.1 fails to revoke memory tool access when an operator hot-disables memory configuration. Existing memory_search and memory_get tool instances retain the enabled configuration captured at creation time because the execution-time resolver treats explicit disablement like an unavailable configuration snapshot and restores the stale authority. As a result, during an already-running agent turn the model can continue searching and reading durable memory after the operator revoked that access, for the remainder of that run. Exploitation requires memory to be disabled while a previously created memory tool remains active. The issue is fixed in 2026.8.1. |
| OpenClaw (npm package 'openclaw') versions >= 2026.4.5 and < 2026.8.1 can lose the originating requester's restrictions and untrusted provenance when session-derived text is persisted to session memory. In deployments where session-memory capture and dreaming are enabled, a restricted external sender whose messages are admitted with limited tools can persist instructions that are later supplied to an unattended background (dreaming) agent holding broader file and command capabilities, allowing actions beyond the authority of the original turn and affecting files, commands, or services available to that agent. Exploitation requires the content to be captured, selected for later processing, and followed by the model. The issue is fixed in 2026.8.1. |
| OpenClaw before 2026.8.2 contains a denial of service vulnerability in the Browser extension relay that allows unauthenticated network sources to exhaust pending-authentication capacity. Attackers can hold every pending slot by maintaining silent WebSocket upgrades, preventing paired extensions from completing Browser Relay Authentication v2. |
| In the Linux kernel, the following vulnerability has been resolved:
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end > start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Keep kick_sync waiting on the rq's own CPU
kick_sync_wait_bal_cb() assumes it runs on the rq's CPU from the
__schedule() tail: the snapshots it compares against live in that CPU's
percpu area and the busy-wait runs with the rq lock dropped and IRQs
enabled.
However, dispatch can now drop the rq lock while the callback sits queued,
and rq lock takers in that window (the sched class change paths, the scx
task iterator) flush pending balance callbacks on release, running the
callback on a foreign CPU. Such a run compares against unrelated snapshots
and can deadlock when the executing CPU is itself a wait target.
Bail on a foreign CPU and leave the wait state alone. The wait only observes
progress that the resched kicks already guarantee and the rq's next wait
picks up the stale cpus_to_sync bits. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: xgmac2: disable RBUE in default RX interrupt mask
Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive
and can trigger a MAC interrupt storm under heavy RX pressure. When the
DMA runs out of RX descriptors it fires RBUE continuously until software
refills the ring.
However, RBUE is redundant: the normal RX completion interrupt (RIE)
already triggers NAPI, which processes completed descriptors and refills
the ring, causing the DMA to resume. The RBUE handler itself only sets
handle_rx - the same outcome as RIE.
On Agilex5 under heavy RX pressure, the MAC interrupt (which includes
RBUE) was observed firing 1,821,811,555 times against only 2,618,627
actual RX completions - a ~695x ratio - confirming the severity of the
storm.
RBUE does not provide OOM recovery. If page_pool is exhausted,
stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays
suspended, and RBUE fires again on the next NAPI completion - a storm
with no forward progress. This patch trades that storm for a clean
stall with the same RX outcome. Proper OOM recovery is a pre-existing
gap outside the scope of this fix.
Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool
counter will always read 0 on XGMAC2 devices. This behaviour is already
inconsistent across DWMAC core versions.
Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX
to prevent the interrupt storm while keeping normal RX handling intact. |
