| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| Incorrect Authorization vulnerability in Drupal Mermaid Diagram Field allows Forceful Browsing. This issue affects Mermaid Diagram Field versions: from 1.0.4 to 1.0.9. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| IntentKit through 2.6.3, fixed in commit 5b91da5, contains an authorization bypass vulnerability where the executor validates tool calls against the full tool registry rather than the per-request narrowed tool advertisement enforced by ToolBindingMiddleware, allowing owner-only state-changing tools such as wallet transfer, posting, memory-write, and call-agent to execute without any human-in-the-loop or approval gate. An unauthenticated or public caller in WEB, API, TWITTER, or TELEGRAM contexts can exploit this by supplying the exact de-advertised tool name and arguments via indirect prompt injection or by replaying checkpoint and history data on a reused thread, achieving unauthorized execution of owner-restricted capabilities. |
| Missing Authorization vulnerability in Drupal Taxonomy Term Glossary allows Forceful Browsing. This issue affects Taxonomy Term Glossary versions: from 0.0.0 to 4.6.0. |
| Sourcecodester Hotel and Lodge Management System 2.0 is vulnerable to unauthenticated SQL injection and can allow remote attackers to execute arbitrary SQL commands via the email parameter to the edit page for Customer, Room, Currency, Room Booking Details, or Tax Details. |
| Use after free in Compositing in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| Use after free in WebRTC in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers.
Let's recompute nh pointer to make sure any change won't mess things up. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| AMI APTIOV contains vulnerabilities
in BIOS where users may cause “Buffer Access with Incorrect Length
Value” by local access. Successful exploitation of this vulnerability could
lead to buffer overflows, memory corruption, and arbitrary code execution, and
also impact Confidentiality, Integrity, and Availability. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| Backstage is an open framework for building developer portals. Prior to 2.2.4, the @backstage/plugin-techdocs-backend package is affected by improper authorization enforcement for techdocs static content. An authenticated user with access to one TechDocs documentation site could craft a URL able to read documentation belonging to a different entity. This only affects deployments using the external TechDocs builder with an external storage provider (S3, GCS, etc.) and the permission framework enabled. Instances that do not use the permission framework are unaffected, since TechDocs content is visible to all authenticated users by design. This issue is fixed in version 2.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| Missing Authorization vulnerability in Drupal AI Translate allows Forceful Browsing. This issue affects AI Translate versions: from 0.0.0 to 1.3.2, from 1.4.0 to 1.4.1. |
| Missing Authorization vulnerability in Drupal AI (Artificial Intelligence) allows Forceful Browsing. This issue affects AI (Artificial Intelligence) versions: from 0.0.0 to 1.3.13, from 1.4.0 to 1.4.8. |
