| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix use-after-free of the source's parent directory
current_check_refer_path() reads old_dentry->d_parent without holding a
reference nor a lock on it, and then dereferences it in
collect_domain_accesses() and in the audit record.
A reference on a child does not pin its parent: __d_move() reassigns
dentry->d_parent and drops the reference the child held on its former
parent. hook_path_rename() is not affected because the rename path
calls lock_rename() before the hook, so the source cannot be reparented
under it. hook_path_link() has no such protection: filename_linkat()
holds a reference on the source dentry but neither locks nor references
its parent, so a concurrent rename(2) can reparent the source while
security_path_link() runs, and the former parent can then be removed and
freed while the hook walks it.
A process can trigger this after entering a Landlock domain that handles
at least one filesystem access right. The process can then race a
linkat(2) loop against rename(2) and rmdir(2):
BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290
Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549
collect_domain_accesses+0x278/0x290
current_check_refer_path+0x952/0x1120
security_path_link+0x1be/0x320
filename_linkat+0x342/0x6d0
__x64_sys_linkat+0xfa/0x150
Freed by task 562:
kmem_cache_free+0x139/0x4c0
i_callback+0x4b/0x80
rcu_core+0x7dc/0x10a0
Take a reference on the dentry selected as the source parent, using
dget() for the common-mount-root case and dget_parent() otherwise.
Release it after the hierarchy walk and synchronous audit logging.
[mic: Clarify the caller, reachability, and reference handling] |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Check resize_disabled before publishing the new subbuf order
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM size is 0 on mapping failure
On a mapping failure of the SRAM, the SRAM size is left as non-zero. The
probe will succeed as the error return is not checked since having SRAM is
not a hard requirement. The non-zero size allows jobs to access SRAM which
is left pointing to physical base address 0x0. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Limit firmware log name prints to field size
The name in struct vpu_tracing_buffer_header is a fixed-size array
populated by the NPU firmware. It is expected to be NUL-terminated,
but nothing on the host side enforces this, so printing it with an
unbounded string conversion would read past the field if the
terminator is ever missing and expose adjacent bytes of the shared
tracing BO through dmesg and the debugfs FW log output.
Print at most as many characters as the name field holds, so the output
never runs past it even if the string is not NUL-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit"). |
| In the Linux kernel, the following vulnerability has been resolved:
eth: ice: don't dereference pointers from TP_printk()
After forwarding net-next during the v7.3 merge window we started
seeing:
TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index
WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b
this is due to extra checks added in tracing subsystem in
commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()").
Printing happens long after the event was recorded, by which point
the pointers may be invalid (the ring or the dim instance).
Copy the eight scalars into the event instead. |
| BusyBox romfs volume ID parsing uses unbounded strlen on attacker-controlled metadata, causing a heap buffer overflow when processing crafted filesystem images. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: zero-initialize policy cpumask before sysfs publication
cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(),
i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus
masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate
kmalloc_node() allocation, so its bitmap holds whatever the slab allocator
left behind:
cpufreq_online()
cpufreq_policy_alloc()
alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */
kobject_init_and_add() /* policy%u/ appears in sysfs */
cpufreq_policy_online()
cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */
This leaves a window in which the sysfs attributes are already reachable
while policy->cpus is still garbage. show()/store() gate on
policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero
bitmap makes them run the attribute callbacks on a policy that is not
initialized yet.
Fix this by using zalloc_cpumask_var() for policy->cpus. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: initialize IRQ lock before requesting IRQ
uni_reader_init() registers the shared IRQ before initializing
reader->irq_lock. A pending interrupt can invoke the handler while the
lock is still uninitialized.
Initialize the lock before registering the IRQ so the interrupt path
always sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data->fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram var refs regardless of how often they are referenced
Using the same variable three or more times in one hist trigger leaks the
variable reference and its strings when the trigger is removed.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made a trigger's var_refs[] array the only owner of a var ref:
destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field
expressions never destroy one. One entry, freed once, no count needed.
commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same
var as value") then made repeated references share one object and added a
count of them. Only the increment side exists, since those expressions
still return early and never drop a reference, so __destroy_hist_field()
sees how many references were created rather than how many are left. It
frees when the decremented count is 0 or 1, so two references work and
three or more leak.
Sharing kept one array entry per object, and create_var_ref() searches and
appends within a single trigger, so nothing outside it holds the object.
Removing a trigger whose variables are still referenced is already refused
by check_var_refs() with -EBUSY. Drop the count and free unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Don't destroy fields when event removal fails
destroy_user_event() destroys the event's fields before attempting to
remove the trace event call. If user_event_set_call_visible() fails,
e.g. because the event is still enabled and trace_remove_event_call()
returns -EBUSY, the event is left registered with an irreversibly
destroyed field list. Any subsequent interaction with the event then
operates on an empty field list while it is still fully visible in
tracefs.
Move the field destruction after the call removal, and splice the
field list back onto the event when the removal fails so the event
remains in a consistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reject invalid states in connection template sync records
IPVS sync receivers validate protocol states before creating or updating a
connection. For connection templates, however, they only log states outside
the template state range and still store the value in the connection.
A template can be returned by ordinary connection lookup. TCP and SCTP then
use the invalid state as an index into their transition tables.
Reject invalid template states in both sync protocol versions before
looking up or modifying a connection. The version 1 path handles both
IPv4 and IPv6 records. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vfb: defer cleanup until the last reference
FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the
usercopy after dropping info->lock. vfb_remove() frees the colormap
immediately after unregistering the framebuffer, even when an open file
still holds a reference to fb_info. A concurrent driver unbind can
therefore free the colormap while the ioctl copies it to userspace.
KASAN reports:
BUG: KASAN: slab-use-after-free in _copy_to_user
Read of size 512 by task poc/125
_copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24)
fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211)
do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114)
Allocated by task 1:
fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108)
vfb_probe (drivers/video/fbdev/vfb.c:459)
Freed by task 124:
fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151)
vfb_remove (drivers/video/fbdev/vfb.c:489)
unregister_framebuffer() drops the registration reference, and fbdev calls
fb_destroy after the last put_fb_info(). Move the registered framebuffer's
cleanup into an fb_destroy callback so its colormap and screen buffer stay
alive until all file references have been released. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: autofs: fix memory leak in autofs_fill_super()
In autofs_fill_super(), we create a new inode using
autofs_new_ino(), however, if we fail to create root_inode,
(that is, root_inode failure path), we return -ENOMEM without
freeing the new inode(ino) that we created causing a memory leak.
Fix this by adding autofs_free_ino() to free the inode we created
in root_inode failure path before returning ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: prevent UAF during module unload
nf_ct_set_timeout() protects the timeout hook dereference and policy lookup
with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net
operations before it clears the hook.
This allows the following interleaving:
CPU 0 CPU 1
cttimeout_exit() nf_ct_set_timeout()
unregister_pernet_subsys() rcu_read_lock()
kfree(pernet) h = nf_ct_timeout_hook
h->timeout_find_get()
nfct_timeout_pernet()
The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the
already freed per-net timeout list. KASAN reported:
BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get
Read of size 8 by task poc/90
Call Trace:
ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout]
nf_ct_set_timeout+0x7b/0x3c0
xt_ct_tg_check+0x724/0xb20
xt_check_target+0x234/0xa90
do_ipt_set_ctl+0x570/0x1270
Allocated by task 89:
__kmalloc_noprof+0x16e/0x460
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
Freed by task 91:
kfree+0x131/0x390
ops_undo_list+0x3d4/0x730
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout]
Clear the hook and wait for existing readers before unregistering the
per-net operations. This blocks new policy lookups and ensures readers that
observed the hook finish before the per-net storage is freed. |
