| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Update last skb marker in manage_oob().
Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU
due to OOB skb.
In the following cases, manage_oob() skips OOB skb(s) and returns
NULL for the last recv(MSG_PEEK):
socketpair(AF_UNIX, SOCK_STREAM, 0, sk);
1) skb -> OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
2) skb -> consumed OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
3) consumed OOB skb -> OOB skb -> NULL
send(sk[0], "a", 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_OOB);
send(sk[0], "b", 1, MSG_OOB);
recv(sk[1], buf, 1, MSG_PEEK);
Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer,
or non-OOB skb is not yet consumed), and unix_stream_data_wait() is
called.
However, it returns immediately because @last is not updated in
unix_stream_read_generic(), and the thread busy-waits for a new skb.
Let's update @last in manage_oob().
For MSG_PEEK, @last is updated with the skipped OOB, and for the
non-peek case, @last matches the returned value (when !copied)
because OOB is unlinked.
Note that manage_oob() is inlined and no stack canary is added. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
tick/broadcast: Plug clockevents replacement race
朱恺乾 reported and decoded the following race condition when a broadcast
device is replaced:
CPUA CPUB
__tick_broadcast_oneshot_control()
bc = tick_broadcast_device.evtdev;
tick_install_broadcast_device(dev)
clockevents_exchange_device(cur, dev)
shutdown(cur);
detach(cur);
cur->handler = noop;
tick_broadcast_device.evtdev = dev;
tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device.
If the original broadcast device has a restricted interrupt affinity mask
and the last CPU in that mask goes offline then the BUG() in
tick_cleanup_dead_cpu() triggers because the clockevent device is not in
detached state.
The reason for this is that tick_install_broadcast_device() is not
serialized vs. tick broadcast operations.
The obvious cure is to serialize tick_install_broadcast_device() with
tick_broadcast_lock against a concurrent tick broadcast operation.
That requires to split clockevents_exchange_device() into two parts, one
which does the exchange, shutdown and detach operation and the other which
drops the module reference count. This is required because the module
reference cannot be dropped while holding tick_broadcast_lock.
Let clockevents_exchange_device() do both operations as before, but let the
broadcast device code take the two step approach and do the device
exchange under tick_broadcast_lock and drop the module reference count
after releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take the reference before publishing the named histogram trigger
event_hist_trigger_named_init() puts the trigger on the global
named_triggers list and only then takes the reference on the trigger it
shares its histogram with:
data->ref++;
save_named_trigger(data->named_data->name, data);
ret = event_hist_trigger_init(data->named_data);
if (ret < 0) {
kfree(data->cmd_ops);
data->cmd_ops = &trigger_hist_cmd;
}
return ret;
event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and
nothing takes the trigger back off the list on the way out.
event_hist_trigger_parse() frees it, and the next lookup by name reads the
freed object:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff888009346860 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 67:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Do the reference first and publish once it has succeeded, so that nothing
which can fail runs after the trigger becomes findable. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Limit firmware log name prints to field size
The name in struct vpu_tracing_buffer_header is a fixed-size array
populated by the NPU firmware. It is expected to be NUL-terminated,
but nothing on the host side enforces this, so printing it with an
unbounded string conversion would read past the field if the
terminator is ever missing and expose adjacent bytes of the shared
tracing BO through dmesg and the debugfs FW log output.
Print at most as many characters as the name field holds, so the output
never runs past it even if the string is not NUL-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
bootconfig: Fix integer overflow in initrd size check
Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd
with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer
arithmetic:
data = ((void *)hdr) - size;
to wrap around on 32-bit systems (or when pointer subtraction overflows).
Because data wraps around, the subsequent bounds check:
if ((unsigned long)data < initrd_start)
evaluates to false, bypassing the check. The kernel then calls
xbc_calc_checksum(data, size), which attempts to read 4GB of memory,
hitting unmapped pages and triggering a fatal kernel page fault during
early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an
unbounded 32-bit size can similarly bypass the initrd_start check.
Fix this by:
1. Ensuring the initrd is at least large enough to contain the bootconfig
footer and verifying hdr is within the initrd bounds.
2. Checking that size does not exceed XBC_DATA_MAX and does not exceed
the available space between initrd_start and hdr before performing
pointer subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: dma-unmap pages before handling migration errors
drm_pagemap_migrate_unmap_pages() relies on the pages array to determine
which pages require DMA unmapping. However,
drm_pagemap_migration_unlock_put_pages() clears the array as part of its
cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page
information if it is called afterward.
Call drm_pagemap_migrate_unmap_pages() before
drm_pagemap_migration_unlock_put_pages() so the pages array remains
valid during DMA unmapping. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: validate FDP configuration descriptor sizes
Validate descriptor sizes while walking the FDP configurations log so
dsze == 0 or a descriptor past the log end cannot cause unbounded
iteration or reads past the buffer. |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: embed f2fs_gc_kthread in f2fs_sb_info
Instead of allocating f2fs_gc_kthread dynamically, embed it in
f2fs_sb_info. This simplifies lifetime management and prepares for
fixing race conditions during teardown.
- __sbi_store - remount|shutdown
- f2fs_stop_gc_thread
- access sbi->gc_thread
- sbi->gc_thread = NULL
- access sbi->gc_thread->f2fs_gc_task |
| Docmost is open-source collaborative wiki and documentation software. Prior to 0.90.1, an authenticated workspace ADMIN can use the workspace invitation flow to invite an external email address with the OWNER role because the role ceiling does not prevent ADMIN users from granting privileges above their own. When the invitation is accepted, the new account receives OWNER-level permissions, allowing the ADMIN to create a backdoor OWNER account or promote a colluding external user to the workspace's highest privilege level. This issue is fixed in version 0.90.1. |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an unauthenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash. |
