| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no post-launch
host ioctl is needed to arm or request teardown.
On upstream master 62cc90241548, generic KASAN reported:
BUG: KASAN: slab-use-after-free in do_raw_spin_lock
Write of size 4 at addr ff60000005e58898
kvm_riscv_vcpu_set_interrupt
kvm_riscv_vcpu_hrtimer_expired
__hrtimer_run_queues
hrtimer_interrupt
The object was allocated by KVM_CREATE_VCPU and freed concurrently by:
kvm_destroy_vcpus
kvm_arch_destroy_vm
kvm_destroy_vm
__fput
For deterministic validation, I added mdelay(1000) immediately after
the existing next_set = false assignment. This only widens the
existing post-clear callback window. A no-delay trace build naturally
reached the callback-after-teardown-start/before-deinit ordering in 12
of 200 runs, but 1,500 stock-kernel stress iterations did not produce a
KASAN report, so natural reproduction is timing-sensitive.
Always invoke hrtimer_cancel() for an initialized timer. Preserve the
existing -EINVAL result when the timer is no longer set, but only after
synchronizing with a running callback.
With this patch, hrtimer_cancel() blocked for the full widened callback
window before vCPU destruction. KASAN reported no error in 100
fixed-and-widened runs or 200 fix-only timing-sweep runs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up processing both again but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels or run NAT and adds the
new extension for that breaking the pointer in the expectation
list causing UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where we need to process both clones without
modifications in the same zone. So, let's just reset the entry in
case for some reason we got an skb with a shared one. This doesn't
affect any known use cases, but avoids any potential problems with
sharing and modification of the unconfirmed ct entry.
Unlike openvswitch module, act_ct allows for NAT without commit.
Changing that would be a uAPI break. So, act_ct needs to reset on NAT
regardless of the commit flag to avoid reallocation of the extension
space. This, however, doesn't really change the picture for sensible
networking cases as there should be no need to run the same packet
twice (before and after the clone) through conntrack without packet
header or zone changes and without commit.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction
We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which
is a Bad Idea(tm). Freeing the page tables is fair game (this is what
this callback is for), but freeing the container that could still be
referenced by another part of the system is not great.
Instead, grow separate destructors that gets called when we tear the VM
down for good. From there, we can nuke both the individual MMUs as well
as the global array that points to them, safe in the knowledge that the
vcpus themselves have been destroyed already. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto(). |
| In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xdp_rcv (drivers/net/veth.c:941)
veth_poll (drivers/net/veth.c:986)
__napi_poll (net/core/dev.c:7787)
net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007)
handle_softirqs (kernel/softirq.c:645)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't run ops.dequeue() with a DSQ lock held
ops.dequeue() is invoked with the source user DSQ's lock still held on
the consume and move paths (scx_consume_dispatch_q(),
move_task_between_dsqs()). A BPF scheduler which locks the source user
DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq -
self-deadlocks.
ops.dequeue() can only call the "any" kfuncs and none of them can lock a
builtin DSQ, so the global and bypass paths can't deadlock; however,
all DSQ locks share one lockdep class, so iterating any user DSQ from
ops.dequeue() on those paths trips the recursion check.
Move the invocation after the DSQ unlock on all three paths.
SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer
so that the callback is invoked exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Introduce task_struct->sched_cache_grp to fix UAF
Add a sched_cache_grp pointer to task_struct so that scheduler code
can access the cache group directly via the task, without going
through mm->sched_cache_grp. This decouples the scheduler's hot-path
accesses from the mm_struct.
Each task holds its own refcount on the sched_cache_group, separate
from the reference held by its mm_struct. The reference is acquired
in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm().
This fixes the use-after-free when account_mm_sched() reaches the group
through a task whose mm is being switched, as reported by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Convert all scheduler code in fair.c and exit.c to use
p->sched_cache_grp instead of p->mm->sched_cache_grp.
Keep the fork/exec/exit reference management out of the generic mm
paths: add sched_cache_fork(), sched_cache_fork_cleanup(),
sched_cache_exec_mmap() and sched_cache_exit_mm() in
kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE),
so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper
instead of open-coding the refcounting under #ifdef. Also add
sched_cache_group_get() and task_cache_group_get(). |
| Untrusted pointer dereference in Windows Storage Port Driver allows an unauthorized attacker to elevate privileges with a physical attack. |
| ColdFusion is affected by an Incorrect Authorization vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue does not require user interaction. |
| ColdFusion is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. A low-privileged attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in PT Norther Lights Production MapSVG mapsvg-lite-interactive-vector-maps allows SQL Injection.This issue affects MapSVG: from n/a through 8.16.1. |
| The extension hides the correct answer to each CAPTCHA inside the image data of the CAPTCHA itself. Anyone who can request a CAPTCHA image can read the answer from it and submit it, so automated clients can pass the challenge. This applies to the default configuration, because the audio feature that causes the answer to be embedded is enabled by default. Forms that rely on the CAPTCHA as their only protection against automated submissions are exposed to abuse by bots. |
| Reliance on untrusted inputs in a security decision in Microsoft Office Word allows an unauthorized attacker to bypass a security feature locally. |
| Improper access control in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| Koha is vulnerable to SQL injection in the Most-circulated items report. The reports/cat_issues_top.pl script (sub calculate) concatenates the user-controlled Criteria, Filter, and Limit request parameters directly into dynamic SQL. Criteria is only prefix-normalized and never validated against an allow-list, so it is inserted verbatim into identifier positions (SELECT DISTINCTROW, GROUP BY, ORDER BY, and the main calculation query). Filter values are concatenated raw into single-quoted LIKE, BETWEEN, and comparison fragments. Limit is appended raw to a LIMIT clause. An authenticated staff user with the reports module permission (not requiring superlibrarian) can inject arbitrary SQL and read any table reachable by the Koha database user, including borrowers (userid and bcrypt password hashes, two-factor secrets, personal data), api_keys, and sessions. The issue is fixed in Koha 24.11.19, 25.05.14, 25.11.08, and 26.05.03, and in the 26.11 development branch. This is the unpatched twin of reports/bor_issues_top.pl (CVE-2026-70372). |
| Access of resource using incompatible type ('type confusion') in Windows StateRepository API allows an authorized attacker to elevate privileges locally. |
| ColdFusion is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. The vulnerable component is restricted to an administrative network zone by default. Exploitation of this issue does not require user interaction. Scope is changed. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 SMTP MIME Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a lack of error checking when the MIME fields of the SMTP header are parsed. An attacker could exploit this vulnerability by sending crafted SMTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts. |
