| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in sssd, specifically within the PAM (Pluggable Authentication Modules) responder's protocol v1 parser, pam_parse_in_data(). A local client with access to the PAM responder's UNIX socket can exploit this by negotiating protocol v1 and sending an empty or truncated PAM request body. This can trigger an out-of-bounds read, potentially causing the PAM responder to terminate or restart, leading to a local denial of service. |
| A flaw was found in the sssd NSS responder. This input validation vulnerability allows a local attacker, by sending specially crafted service lookup requests to the NSS responder's UNIX socket, to cause an out-of-bounds read. This out-of-bounds read may lead to a denial of service (DoS) by crashing the NSS responder process. While unprivileged local clients can typically reach the socket, there is no evidence of privilege escalation or reliable data disclosure. |
| A weakness has been identified in Matthias-Wandel jhead up to 3.3. This affects the function Get16u of the file exif.c of the component EXIF Parsing. This manipulation causes out-of-bounds read. The attack requires local access. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| An issue was discovered in the mirage-crypto-ec package before 2.3.0 for OCaml. There is an EC public key out-of-bounds read for compressed points. |
| An out-of-bounds read in the stbtt_GetGlyphShape component of nothings stb commit 31c1ad3 allows attackers to cause a Denial of Service (DoS) via sending a crafted TTF file. |
| In libxml2 before 2.15.4, xmlFAParsePosCharGroup has an out-of-bounds read, aka an out-of-bounds read in the NXT macro in xmlregexp. |
| Certain VLC media player builds in versions 3.0.0 through 3.0.23 contain a memory-safety vulnerability reachable when processing media from an attacker-controlled network source. Exploitation requires user interaction and may disclose a limited, layout-dependent amount of VLC process memory. Exposure depends on build configuration. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| zstd-jni versions before 1.5.7-14 fail to validate offset and length parameters in the ZstdDictCompress constructor, allowing out-of-bounds memory reads. Attackers can supply untrusted offset or length values to read native heap memory into the compression dictionary, typically causing JVM crashes. |
| Buffer Over-read vulnerability in Apache HTTP Server via outbound OCSP requests to an attacker controlled OCSP server
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| A flaw was found in gdk-pixbuf. This vulnerability allows a remote attacker to cause a heap out-of-bounds read by providing a specially crafted Apple Icon Image (.icns) file. The uncompress() function, which handles RLE-encoded ICNS icon data, fails to validate the source buffer's boundaries during decompression. This can lead to a denial of service, where the application crashes, or to information disclosure, potentially revealing sensitive data from adjacent memory. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write
The trailing byte path in altera_cvp_send_block() dereferences a u32
pointer even when only 1-3 bytes remain in the input buffer. If the buffer
ends at a page or scatterlist boundary, this can read past the valid image
data and fault.
Copy the remaining bytes into a zero-initialized u32 before writing the
final word so only valid bytes are read from the input buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()
Patch series "lib/ucs2_string.c: fix out-of-bounds read in
ucs2_strnlen()", v2.
This series fixes an off-by-one out-of-bounds read in ucs2_strnlen().
The first patch is the real fix, the second patch comes as a bonus and
fixes the code indentation.
This patch (of 2):
ucs2_strnlen() checks the current character before checking whether the
caller-provided maximum length has been reached. If the input is not
NUL-terminated within that bound, the loop can read one ucs2_char_t past
the limit.
Test the length before dereferencing to prevent an off-by-one
out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: fix out-of-bounds read in signature length check
ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field
before handing the signature payload to verify_pkcs7_signature(), but the
check has the wrong sign:
if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node))
The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ,
64 bytes) into the node, so the payload is at most
snod->len - sizeof(struct ubifs_sig_node)
bytes long. Adding the header size instead of subtracting it accepts a
declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually
holds -- past the end of c->sbuf, which is vmalloc(c->leb_size).
verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder()
is then handed that inflated length and reads beyond the allocation while
walking the DER headers. The node length comes straight from the mounted
image, so a crafted signed UBIFS image reaches this via
ubifs_read_superblock() before the signature is cryptographically checked.
snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner
(c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected
subtraction cannot underflow. Legitimately signed images are unaffected: a
correct superblock never declares a signature longer than the node it is
embedded in. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix XDR padding calculation in ff_encode_getdeviceinfo
nfsd4_ff_encode_getdeviceinfo() computes the da_addr_body reservation
as 16 + netid_len + addr_len, but the subsequent xdr_encode_opaque()
calls emit 8 + round_up(netid_len, 4) + round_up(addr_len, 4) bytes.
The mismatch means the declared da_addr_body length exceeds the actual
encoded data by 2-8 bytes on every flexfile GETDEVICEINFO reply,
leaking stale reply-page content to the client and mis-aligning the
subsequent version list decode.
Use xdr_align_size() for each string length to match what
xdr_encode_opaque() actually writes. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: validate OSD extent maps before cursor advance
net/ceph/osd_client.c:osd_sparse_read() validates that the sparse-read
data length matches the summed extent lengths, but it does not validate
that each OSD-supplied extent is monotonic and lies inside the original
request range. A malformed authenticated OSD reply can advertise a
far-forward nonzero extent offset with a matching data length and make
the client advance the message-data cursor beyond the request buffer.
This reaches the BUG_ON(!*length) assertion in ceph_msg_data_next() from
the client receive path.
Impact: A malicious or compromised authenticated Ceph OSD peer can crash
a kernel Ceph client via a malformed sparse-read reply.
Reject sparse extent maps that overflow, move backwards, overlap, or
extend outside the original sparse-read request before advancing the
cursor.
[ idryomov: perform sparse_extent_map_valid() check a bit earlier,
in CEPH_SPARSE_READ_DATA_LEN instead of CEPH_SPARSE_READ_DATA_PRE
state ] |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound num_export_targets array for mds info v2/v3
ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from
each per-mds info record and advances the decode cursor by
num_export_targets * sizeof(u32) without first checking that many bytes
remain. The only upper-bound check that catches a runaway cursor
(*p > info_end) is gated on info_v >= 4, because info_end is left NULL
for info_v 2 and 3. When the monitor sends an MDS map whose per-mds
info version is 2 or 3 with an oversized num_export_targets, the cursor
moves past the message front buffer and the later export-targets loop
calls the unchecked ceph_decode_32() on out-of-bounds memory.
A kernel client processes CEPH_MSG_MDS_MAP from its monitor session
(net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to
ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and
calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an
on-path attacker on an unsigned/unencrypted messenger session, can
therefore drive an out-of-bounds read in the client kernel; on x86_64
with KASAN it is reported as a slab-out-of-bounds read in
ceph_mdsmap_decode(). The decoded values land in the internal
info->export_targets[] array, so the consequence is a kernel
out-of-bounds read, not an information leak to the attacker.
Impact: a malicious or compromised Ceph monitor sending an MDS map with
a per-mds info version of 2 or 3 and an oversized num_export_targets
field triggers an out-of-bounds read in the CephFS client kernel.
Add a ceph_decode_need() for the export-targets array before advancing
the cursor, so the bound is enforced for every info_v >= 2, not only
info_v >= 4. This mirrors the count-then-need idiom already used for
m_data_pg_pools later in the same function.
Compute the export-targets byte count with size_mul() and reuse that
checked length when advancing the cursor, so the attacker-controlled
num_export_targets multiplication fails closed on overflow rather than
relying on the later kcalloc() guard. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix ALIGN() overflow in symlink_data() error context loop
The check added by commit 7d9a7f1f96cd ("smb/client: fix possible
infinite loop and oob read in symlink_data()") compared the post-ALIGN
length against the remaining buffer, but ALIGN() itself can overflow:
for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8)
wraps to 0, so the subsequent bounds check passes, and the loop
advances by zero bytes leaving 'p' pointing into stale data.
Fix by checking the raw ErrorDataLength against the remaining space
before applying ALIGN(), then checking again after. Since raw_len is
bounded by the buffer, raw_len + 7 cannot overflow, so the second check
is an exact post-alignment bounds guard. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: validate report size in mcp2221_raw_event()
mcp2221_raw_event() never validates the size of incoming HID reports.
In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3]
as the copy length without checking that 4 + data[3] bytes actually
exist in the received report. A malicious or misbehaving USB device can
send a short report with a large data[3], causing the memcpy to read
past the valid report data in the HID transfer buffer and leak
uninitialized kernel memory back to userspace through the I2C/SMBus
read path.
Add a minimum size check at entry and validate that the source range
fits within the received report before the copy. |
