| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for. |
| A weakness has been identified in Zhonglun CloudPOS 3.0. Affected by this vulnerability is an unknown functionality of the file Program.cs of the component Automatic Update. Executing a manipulation of the argument version/url/packagekey/package name can lead to channel accessible by non-endpoint. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_net: check TX pull result before RX copy
vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is
currently added to the unsigned byte counter and then passed as a size_t
length to receive_filter() and vringh_iov_push_iotlb(). A negative error
can therefore become a large length in the RX path.
Handle non-positive pull results before every length use. Count the TX
error and complete the consumed TX descriptor with zero bytes.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| A MongoDB driver component could write sensitive configuration information, including a credential used for outbound network connectivity, to application log output in cleartext during routine client initialization. This occurs automatically as part of normal operation and requires no special privileges to trigger. A party able to read the affected application's logs or downstream log-aggregation storage could recover the credential and reuse it to authenticate to the associated network infrastructure. This issue affects confidentiality only. |
| Improper limitation of a pathname to a restricted directory ('path traversal') in Azure Arc allows an unauthorized attacker to elevate privileges over a network. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
