| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix deadlock when using NCM gadget
The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").
Under PREEMPT_RT the deadlock can be readily triggered by heavy network
traffic, for example using "iperf --bidir" over NCM ethernet link.
The deadlock occurs because the threaded interrupt handler gets
preempted by a softirq, but both are protected by the same spinlock.
Prevent deadlock by disabling softirq during threaded irq handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mcb: fix a double free bug in chameleon_parse_gdd()
In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev'
would be released in mcb_device_register() via put_device().
Thus, goto 'err' label and free 'mdev' again causes a double free.
Just return if mcb_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: inftlcore: Add error check for inftl_read_oob()
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: vnifilter: Fix unlocked deletion of default FDB entry
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup").
Reproducer:
# ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
# bridge vni add vni 10010 remote 198.51.100.1 dev vx0
# bridge vni del vni 10010 dev vx0
Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.
[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
<TASK>
__vxlan_fdb_delete+0xbe/0x560
vxlan_vni_delete_group+0x2ba/0x940
vxlan_vni_del.isra.0+0x15f/0x580
vxlan_process_vni_filter+0x38b/0x7b0
vxlan_vnifilter_process+0x3bb/0x510
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix oob write in trace_seq_to_buffer()
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too
Similarly to the previous patch, we need to safe guard hfsc_dequeue()
too. But for this one, we don't have a reliable reproducer. |
| It was discovered, that redis, a persistent key-value database, due to a packaging issue, is prone to a (Debian-specific) Lua sandbox escape, which could result in remote code execution. |
| Sudo before 1.9.5p2 contains an off-by-one error that can result in a heap-based buffer overflow, which allows privilege escalation to root via "sudoedit -s" and a command-line argument that ends with a single backslash character. |
| Archive_Tar through 1.4.10 has :// filename sanitization only to address phar attacks, and thus any other stream-wrapper attack (such as file:// to overwrite files) can still succeed. |
| Tar.php in Archive_Tar through 1.4.11 allows write operations with Directory Traversal due to inadequate checking of symbolic links, a related issue to CVE-2020-28948. |
| smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM field. This affects the "uncommented" default configuration. The issue exists because of an incorrect return value upon failure of input validation. |
| Exim 4.92 through 4.92.2 allows remote code execution, a different vulnerability than CVE-2019-15846. There is a heap-based buffer overflow in string_vformat in string.c involving a long EHLO command. |
| In jQuery versions greater than or equal to 1.0.3 and before 3.5.0, passing HTML containing <option> elements from untrusted sources - even after sanitizing it - to one of jQuery's DOM manipulation methods (i.e. .html(), .append(), and others) may execute untrusted code. This problem is patched in jQuery 3.5.0. |
| An issue was discovered in SaltStack Salt before 2019.2.4 and 3000 before 3000.2. The salt-master process ClearFuncs class does not properly validate method calls. This allows a remote user to access some methods without authentication. These methods can be used to retrieve user tokens from the salt master and/or run arbitrary commands on salt minions. |
