| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: flower: Fix chain template offload
When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.
However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].
Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.
As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.
[1]
unreferenced object 0xffff888107e28800 (size 2048):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[......
01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab374e>] __kmalloc+0x4e/0x90
[<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8.....
10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m....
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
[<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
[<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
[<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[2]
# tc qdisc add dev swp1 clsact
# tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
# tc qdisc del dev
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| NLTK through 3.10.3 contains a path traversal vulnerability in model-artifact APIs that bypass pathsec enforcement by using raw file operations on caller-controlled paths. Attackers can read or write files outside allowed sandbox roots through TransitionParser, AveragedPerceptron, PerceptronTagger, and maxent parameter APIs when pathsec is enabled. |
| Cpanel::JSON::XS versions from 4.20 before 4.80 for Perl write out of bounds when a tied or shared hash grows during canonical encoding in encode_hv.
With canonical, the keys of a tied or threads::shared hash are counted before a second pass collects them for sorting. The encoder uses a fixed 64-entry stack array or, for larger counts, a heap array sized from the first pass. If the second pass exceeds that capacity, entries are written out of bounds before the counts are compared.
This corrupts stack or heap memory and can crash the process. |
| A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected. |
| libosmocore through 1.14.1 contains a buffer overflow in osmo_iuup_compute_payload_crc() in src/gsm/iuup.c. This allows a remote attacker to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl
When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns
-ENOMEM right away and skips the cleanup every other error path goes
through. The GEM object, the bo->parent reference on the VM root and the
MMU notifier registration are all left behind.
Use release_object here, not user_pages_done, range is still NULL at
this point.
(cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e) |
| Insecure permissions in Share to Clipboard v1.14.1 (versionCode 32) allows unauthorized attackers to arbitrarily overwrite another user's clipboard content. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Gemini Labs Site Reviews site-reviews allows Stored XSS.This issue affects Site Reviews: from n/a through 8.3.5. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Codection Import and export users and customers import-users-from-csv-with-meta allows Stored XSS.This issue affects Import and export users and customers: from n/a through 2.5.9. |
| A allocation of resources without limits or throttling vulnerability in Fortinet FortiOS 7.6.0 through 7.6.6, FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions may allow an unauthenticated attacker to perform a slow HTTP DoS attack on the web interface via crafted HTTP requests. |
| Cross Site Scripting vulnerability in InstantASP ltd, InstantForum.NET v.4.1.4 allows an attacker to execute arbitrary code via reflecting un-sanitized input from query string parameters directly into the HTML response without proper output encoding |
| An Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability [CWE-77] vulnerability in Fortinet FortiSandbox 5.2.0, FortiSandbox 5.0.0 through 5.0.6, FortiSandbox 4.4.0 through 4.4.9, FortiSandbox 4.2 all versions may allow a privileged attacker to execute unauthorized code or commands via crafted HTTP requests. |
| The Meta Box – A Framework for Dynamic Websites plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'profile_background[<attacker-chosen key>]' parameter in all versions up to, and including, 5.15.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitability depends on a consuming plugin or theme built on Meta Box that exposes the background field to lower-privileged users and renders stored values via the rwmb_the_value()/format_single_value() pattern; the effective minimum privilege is whatever role that consumer permits, demonstrated at Subscriber level. |
| A flaw was found in ansible-collection-redhat-leapp. When a remediation task is executed with elevated privileges and the `leapp_old_postgresql_data` option is selected, a PostgreSQL data backup archive is created with insecure permissions. This allows a local non-root user on the managed node to read sensitive archived PostgreSQL data, leading to information disclosure. |
| Insecure permissions in mendhak GPSLogger versionCode 137 allows unauthorized attackers to arbitrarily manipulate the app's logging mechanism and log data. |
| A remote HTTP server can set a cookie that curl accepts and writes to a
Netscape cookie jar but cannot reload. On the next invocation using the same
path for `--cookie` and `--cookie-jar`, curl fails before connecting, then the
cleanup procedure replaces the jar with an empty file, deleting cookies for
unrelated domains. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Increase kernel stack size to 32kb
For 64-bit Linux kernels, increase the default kernel stack size
(THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been
triggered recently when building the debian vtk9 package with gcc 17:
stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000)
Kernel panic - not syncing: low stack detected by irq handler - check messages
CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE
Tainted: [W]=WARN
Hardware name: 9000/800/rp3440
Workqueue: writeback wb_workfn (flush-259:0)
Backtrace:
[<000000004022f050>] show_stack+0x70/0x90
[<000000004022378c>] dump_stack_lvl+0x124/0x190
[<000000004022382c>] dump_stack+0x34/0x48
[<000000004020212c>] vpanic+0x204/0x648
[<00000000402025c4>] panic+0x54/0x58
[<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440
[<0000000040227070>] intr_return+0x0/0xc |
| Parse Server before 8.6.106 and 9.0.0 before 9.10.5-alpha.7 mishandles dot notation keys with null or undefined values when building the saved object, so a write is stored but returns an error and skips afterSave triggers and LiveQuery events. A client with write access can exploit this to evade audit logging, notifications, and derived data updates. |
| luci-app-travelmate (and the travelmate package) contain a privilege-escalation flaw: a LuCI/rpcd session holding the luci-app-travelmate write ACL is granted config-wide UCI write access to the travelmate configuration. While the LuCI UI restricts the auto-login script picker to /etc/travelmate/*.login, this is only a frontend restriction. The backend travelmate service (running as root) reads the raw UCI 'script' and 'script_args' values and executes the configured path when the captive-portal auto-login branch (f_check() in travelmate-functions.sh) is reached. An attacker with delegated write permissions can set script to /bin/sh and script_args to attacker-controlled arguments, resulting in arbitrary command execution as root. Confirmed in luci-app-travelmate/travelmate 2.4.5-r3; travelmate 2.4.6-1 is also affected. Fixed in travelmate 2.4.6-2, which enforces the /etc/travelmate/*.login allowlist in the backend. |
