Export limit exceeded: 421198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (94609 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89531 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject connection when transport allocation fails handle_connect_req() returns without action when svc_rdma_create_xprt() fails to allocate the new transport. The CM core returns 0 for CONNECT_REQUEST events, so it does not destroy the new rdma_cm_id. Each allocation failure under memory pressure leaks one rdma_cm_id, and a remote peer driving connection attempts can amplify this. Reject the connection by returning a non-zero status from the CM event handler, which tells the CM core to destroy the orphaned cm_id. | ||||
| CVE-2026-89530 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate. | ||||
| CVE-2026-89527 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Use svc_xprt_put to free listener on create failure svc_rdma_create() calls kfree(cma_xprt) when svc_rdma_create_listen_id() fails. svc_xprt_init() has already acquired a net namespace reference via get_net_track(); kfree bypasses svc_xprt_free() which releases it. Replace the kfree() with svc_xprt_put() so the kref_init birth reference drops to zero and svc_xprt_free() dispatches svc_rdma_free() to clean up properly. sc_cm_id is still NULL at that point; the preceding patch added the necessary NULL guard in svc_rdma_free(). svc_xprt_free() also drops the module reference via module_put(), but the caller _svc_xprt_create() does the same on xpo_create failure, double-putting the single try_module_get() it acquired. Take a compensating __module_get() before the svc_xprt_put() to keep the count balanced, matching the convention in svc_rdma_accept()'s error path. | ||||
| CVE-2026-89437 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int1092: Fix potential memory leak in sar_probe() The memory allocated for device_mode_info in parse_package() called by sar_get_data() is not freed in some of the error paths in sar_probe(). Fix that by converting to use device managed allocations. | ||||
| CVE-2026-80996 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modify, session create, and session modify netlink handlers send multicast notifications through helpers that can fail while allocating or encoding a message, or while multicasting it. For tunnel and session create/modify, a notification is sent after the live operation has completed. Returning a best-effort notification error as the command result can therefore report failure for an operation that already committed and can cause callers to retry and accumulate live objects. Keep sending notifications for listener visibility, but do not propagate their best-effort status as the command result. This also keeps the tunnel modify command consistent with the other notification-only paths. | ||||
| CVE-2026-80990 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Release the Rx HopID that was handed out on mismatch tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range() as the lower bound, so a taken id is not an error there: the allocator returns the next free one above it. tbnet_connected_work() asks for the peer's transmit path, treats any other id as a failure and returns without releasing what it got, so that allocation stays live for the rest of the XDomain connection with nothing left holding a reference to it. Release the id when it is not the one we asked for, the same way the error unwind at the end of the function releases the expected one. | ||||
| CVE-2026-80974 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix potential memory leaks during remove The memory allocated for struct sm501_devdata in sm501_pci_probe() and sm501_plat_probe() is not freed by the corresponding remove functions sm501_pci_remove() and sm501_plat_remove(). Fix that by adding a call to kfree(). | ||||
| CVE-2026-80948 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start() In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses the out_free_eeprom_blob label. Consequently, error paths triggered after successfully parsing the EEPROM free priv->nvm_data but leak priv->eeprom_blob. Fix this memory leak by reordering the error handling labels so that out_free_eeprom falls through to out_free_eeprom_blob. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc6. An x86_64 allyesconfig build showed no new warnings. As we do not have supported Intel DVM wireless hardware and firmware to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-80937 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80852 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: <TASK> worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> | ||||
| CVE-2026-80761 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here. | ||||
| CVE-2026-80739 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||
| CVE-2026-80643 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices. | ||||
| CVE-2026-80631 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject compressed segment that overflows the compressed input lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. | ||||
| CVE-2026-80629 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80554 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Limit the number of channel program segments The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program. The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive. | ||||
| CVE-2026-80526 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. | ||||