| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot). |
| A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| A vulnerability in the Elastic Services Controller (ESC) web interface of the Cisco Ultra Services Platform could allow an authenticated, remote attacker to acquire sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. An exploit could allow the attacker to view information regarding the Ultra Services Platform deployment. Cisco Bug IDs: CSCvd76406. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| A vulnerability in the web framework code of Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. More Information: CSCuw65833 CSCuw65837. Known Affected Releases: 2.2(2). |
| A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260. |
| A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Evolved Programmable Network Manager (EPNM) could allow an unauthenticated, remote attacker to conduct a Document Object Model (DOM) based (environment or client-side) cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. More Information: CSCvc24620 CSCvc49586. Known Affected Releases: 3.1(1) 2.0(4.0.45B). |
| A vulnerability in the CLI command-parsing code of the Cisco StarOS operating system for Cisco ASR 5000 Series 11.0 through 21.0, 5500 Series, and 5700 Series devices and Cisco Virtualized Packet Core (VPC) Software could allow an authenticated, local attacker to break from the StarOS CLI of an affected system and execute arbitrary shell commands as a Linux root user on the system, aka Command Injection. The vulnerability exists because the affected operating system does not sufficiently sanitize commands before inserting them into Linux shell commands. An attacker could exploit this vulnerability by submitting a crafted CLI command for execution in a Linux shell command as a root user. Cisco Bug IDs: CSCvc69329, CSCvc72930. |
| A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995. |
| A vulnerability in the web-based user interface of Cisco Prime Infrastructure (PI) and Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker read and write access to information stored in the affected system as well as perform remote code execution. The attacker must have valid user credentials. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries which could allow the attacker to read and write files and execute remote code within the application, aka XML Injection. Cisco Prime Infrastructure software releases 1.1 through 3.1.6 are vulnerable. Cisco EPNM software releases 1.2, 2.0, and 2.1 are vulnerable. Cisco Bug IDs: CSCvc23894 CSCvc49561. |
| A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565. |
| A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131. |
| A vulnerability in the DNS input packet processor for Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to cause the DNS process to momentarily restart, which could lead to a partial denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete DNS packet header validation when the packet is received by the application. An attacker could exploit this vulnerability by sending a malformed DNS packet to the application. An exploit could allow the attacker to cause the DNS process to restart, which could lead to a DoS condition. This vulnerability affects Cisco Prime Network Registrar on all software versions prior to 8.3.5. Cisco Bug IDs: CSCvb55412. |
| A vulnerability in the web framework code of Cisco Prime Infrastructure 2.2(2) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of the affected system. The vulnerability is due to insufficient input validation of some parameters passed to the web server. An attacker could exploit this vulnerability by convincing the user to access a malicious link or by intercepting the user request and injecting the malicious code. An exploit could allow the attacker to execute arbitrary script code in the context of the affected site or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCuw65830. |
| A vulnerability in the web interface of Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to insufficient protection of sensitive data when responding to an HTTP request on the web interface. An attacker could exploit the vulnerability by sending a crafted HTTP request to the application to access specific system files. An exploit could allow the attacker to obtain sensitive information about the application which could include user credentials. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases 10.6 through 11.5. Cisco Bug IDs: CSCvc99626. |
| A vulnerability in the CLI of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61384 CSCvb86764. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1647). |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366. |
| A vulnerability in the CLI of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61351 CSCvb61637. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1645) 2.0(1.82) 1.1(4.136. |
| A vulnerability in the web interface of Cisco Prime Collaboration Provisioning Software (prior to Release 11.1) could allow an authenticated, remote attacker to view any file on an affected system. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests and fails to apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request that uses directory traversal techniques to submit a path to a desired file location on an affected system. A successful exploit could allow the attacker to view any file on the system. Cisco Bug IDs: CSCvc99604. |
